NM I used -sT why was -sS not working ? something to do with NAT ?
* "arp ping scan" WTF I told you to do -sS ...
bt stuff # nmap 192.168.1.106
Starting Nmap 4.50 ( http://insecure.org ) at 2008-03-21 13:38 GMT
Note: Host seems down. If it is really up, but blocking our ping probes, try -PN
Nmap done: 1 IP address (0 hosts up) scanned in 0.294 seconds
bt stuff # ping 192.168.1.106
PING 192.168.1.106 (192.168.1.106) 56(84) bytes of data.
64 bytes from 192.168.1.106: icmp_seq=1 ttl=128 time=1.64 ms
64 bytes from 192.168.1.106: icmp_seq=2 ttl=128 time=1.61 ms
64 bytes from 192.168.1.106: icmp_seq=3 ttl=128 time=1.64 ms
--- 192.168.1.106 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 1.616/1.634/1.643/0.012 ms
bt stuff # nmap -sS 192.168.1.106 -PN -vv
Starting Nmap 4.50 ( http://insecure.org ) at 2008-03-21 13:39 GMT
Initiating ARP Ping Scan at 13:39
Scanning 192.168.1.106 [1 port]
Completed ARP Ping Scan at 13:39, 0.24s elapsed (1 total hosts)
Read data files from: /usr/local/share/nmap
Nmap done: 1 IP address (0 hosts up) scanned in 0.310 seconds
Raw packets sent: 2 (84B) | Rcvd: 0 (0B)
bt stuff #
bt stuff # airmon-ng
Interface Chipset Driver
wlan0 RTL8187 r8187
bt stuff #
* I know the host is up I think i has to do with the arp ping scan and I can't get it to do anything but 'arp ping scan'