Apply static IP, subnet mask and Gateway then add primary and secondary DNS watch it auto connect.
Problems connecting to network
Hey!
I am using a DWA-645 and ive cracked my WEP key (07:33:22:78:22)
What is the code displyed like? hex?
And when i try to connect to my network, nothing happens.
(ifconfig ath0 up
iwconfig ath0 Ewa key 07:33:22:78:22)
and nothing
Any suggestions?
Btw, i can connect thru windows with that code and the same WiFi card + it works in the other BT releases
Apply static IP, subnet mask and Gateway then add primary and secondary DNS watch it auto connect.
How do you do that... where do you get the values from?
[FONT=Courier New][SIZE=2][FONT=Courier New]hehe...
[/FONT][/SIZE][/FONT]
It should be
iwconfig ath0 essid Ewa key 07:33:22:78:22
then dhcpcd ath0
in the search field on task bar type /root
then go to set IP depending on what Router/Modem you have will depend on the class address you enter.
I have a BElkin
IP 192.168.1.140
255.255.255.0
192.168.1.254
203.87.88.1
203.87.88.2
It will automatically connect. Obviously there is some issues with BT3b DHCP and DNS.
Worked for me and everyone else I know.
It's best to try, and google, then try, and google! and google more!
Pls help!
How can I connect using my PPoE connection using BT3 from my USB Flash?
I have dynamic IP.
Hi sorry to highjack but noob_h4zz0r how did you manage to get your DWA-645 into monitor mode? I have had a quick google to find a solution and sofar nothing that jumped out at me.
I am using BT3 and when i run "iwpriv" monitor mode does not display as an available protocol.
Here is the output of iwpriv
Code:ath0 Available private ioctls : setoptie (8BEE) : set 256 byte & get 0 getoptie (8BEF) : set 0 & get 256 byte setkey (8BF2) : set 60 byte & get 0 delkey (8BF4) : set 7 byte & get 0 setmlme (8BF0) : set 42 byte & get 0 addmac (8BF6) : set 1 addr & get 0 delmac (8BF8) : set 1 addr & get 0 kickmac (8BFE) : set 1 addr & get 0 wds_add (8BFA) : set 1 addr & get 0 wds_del (8BFC) : set 1 addr & get 0 setchanlist (8BE6) : set 32 byte & get 0 getchanlist (8BE7) : set 0 & get 32 byte getchaninfo (8BED) : set 0 & get 2044 byte mode (8BE2) : set 6 char & get 0 get_mode (8BE3) : set 0 & get 6 char setwmmparams (8BE4) : set 4 int & get 0 getwmmparams (8BE5) : set 3 int & get 1 int cwmin (0001) : set 3 int & get 0 get_cwmin (0001) : set 2 int & get 1 int cwmax (0002) : set 3 int & get 0 get_cwmax (0002) : set 2 int & get 1 int aifs (0003) : set 3 int & get 0 get_aifs (0003) : set 2 int & get 1 int txoplimit (0004) : set 3 int & get 0 get_txoplimit (0004) : set 2 int & get 1 int acm (0005) : set 3 int & get 0 get_acm (0005) : set 2 int & get 1 int noackpolicy (0006) : set 3 int & get 0 get_noackpolicy (0006) : set 2 int & get 1 int setparam (8BE0) : set 2 int & get 0 getparam (8BE1) : set 1 int & get 1 int authmode (0003) : set 1 int & get 0 get_authmode (0003) : set 0 & get 1 int protmode (0004) : set 1 int & get 0 get_protmode (0004) : set 0 & get 1 int mcastcipher (0005) : set 1 int & get 0 get_mcastcipher (0005) : set 0 & get 1 int mcastkeylen (0006) : set 1 int & get 0 get_mcastkeylen (0006) : set 0 & get 1 int ucastciphers (0007) : set 1 int & get 0 get_uciphers (0007) : set 0 & get 1 int ucastcipher (0008) : set 1 int & get 0 get_ucastcipher (0008) : set 0 & get 1 int ucastkeylen (0009) : set 1 int & get 0 get_ucastkeylen (0009) : set 0 & get 1 int keymgtalgs (0015) : set 1 int & get 0 get_keymgtalgs (0015) : set 0 & get 1 int rsncaps (0016) : set 1 int & get 0 get_rsncaps (0016) : set 0 & get 1 int hostroaming (000C) : set 1 int & get 0 get_hostroaming (000C) : set 0 & get 1 int privacy (000D) : set 1 int & get 0 get_privacy (000D) : set 0 & get 1 int countermeasures (000E) : set 1 int & get 0 get_countermeas (000E) : set 0 & get 1 int dropunencrypted (000F) : set 1 int & get 0 get_dropunencry (000F) : set 0 & get 1 int wpa (000A) : set 1 int & get 0 get_wpa (000A) : set 0 & get 1 int driver_caps (0010) : set 1 int & get 0 get_driver_caps (0010) : set 0 & get 1 int maccmd (0011) : set 1 int & get 0 wmm (0012) : set 1 int & get 0 get_wmm (0012) : set 0 & get 1 int hide_ssid (0013) : set 1 int & get 0 get_hide_ssid (0013) : set 0 & get 1 int ap_bridge (0014) : set 1 int & get 0 get_ap_bridge (0014) : set 0 & get 1 int inact (0017) : set 1 int & get 0 get_inact (0017) : set 0 & get 1 int inact_auth (0018) : set 1 int & get 0 get_inact_auth (0018) : set 0 & get 1 int inact_init (0019) : set 1 int & get 0 get_inact_init (0019) : set 0 & get 1 int abolt (001A) : set 1 int & get 0 get_abolt (001A) : set 0 & get 1 int dtim_period (001C) : set 1 int & get 0 get_dtim_period (001C) : set 0 & get 1 int bintval (001D) : set 1 int & get 0 get_bintval (001D) : set 0 & get 1 int doth (001E) : set 1 int & get 0 get_doth (001E) : set 0 & get 1 int doth_pwrtgt (001F) : set 1 int & get 0 get_doth_pwrtgt (001F) : set 0 & get 1 int doth_reassoc (0020) : set 1 int & get 0 compression (0021) : set 1 int & get 0 get_compression (0021) : set 0 & get 1 int ff (0022) : set 1 int & get 0 get_ff (0022) : set 0 & get 1 int turbo (0001) : set 1 int & get 0 get_turbo (0001) : set 0 & get 1 int xr (0023) : set 1 int & get 0 get_xr (0023) : set 0 & get 1 int burst (0024) : set 1 int & get 0 get_burst (0024) : set 0 & get 1 int doth_chanswitch (8BE8) : set 2 int & get 0 pureg (0025) : set 1 int & get 0 get_pureg (0025) : set 0 & get 1 int ar (0026) : set 1 int & get 0 get_ar (0026) : set 0 & get 1 int wds (0027) : set 1 int & get 0 get_wds (0027) : set 0 & get 1 int bgscan (0028) : set 1 int & get 0 get_bgscan (0028) : set 0 & get 1 int bgscanidle (0029) : set 1 int & get 0 get_bgscanidle (0029) : set 0 & get 1 int bgscanintvl (002A) : set 1 int & get 0 get_bgscanintvl (002A) : set 0 & get 1 int mcast_rate (002B) : set 1 int & get 0 get_mcast_rate (002B) : set 0 & get 1 int coverageclass (002C) : set 1 int & get 0 get_coveragecls (002C) : set 0 & get 1 int countryie (002D) : set 1 int & get 0 get_countryie (002D) : set 0 & get 1 int scanvalid (002E) : set 1 int & get 0 get_scanvalid (002E) : set 0 & get 1 int regclass (003B) : set 1 int & get 0 get_regclass (003B) : set 0 & get 1 int dropunenceapol (003C) : set 1 int & get 0 get_dropunencea (003C) : set 0 & get 1 int shpreamble (003D) : set 1 int & get 0 get_shpreamble (003D) : set 0 & get 1 int rssi11a (002F) : set 1 int & get 0 get_rssi11a (002F) : set 0 & get 1 int rssi11b (0030) : set 1 int & get 0 get_rssi11b (0030) : set 0 & get 1 int rssi11g (0031) : set 1 int & get 0 get_rssi11g (0031) : set 0 & get 1 int rate11a (0032) : set 1 int & get 0 get_rate11a (0032) : set 0 & get 1 int rate11b (0033) : set 1 int & get 0 get_rate11b (0033) : set 0 & get 1 int rate11g (0034) : set 1 int & get 0 get_rate11g (0034) : set 0 & get 1 int uapsd (0035) : set 1 int & get 0 get_uapsd (0035) : set 0 & get 1 int sleep (0036) : set 1 int & get 0 get_sleep (0036) : set 0 & get 1 int qosnull (0037) : set 1 int & get 0 pspoll (0038) : set 1 int & get 0 eospdrop (0039) : set 1 int & get 0 get_eospdrop (0039) : set 0 & get 1 int markdfs (003A) : set 1 int & get 0 get_markdfs (003A) : set 0 & get 1 int setiebuf (8BEA) : set 1032 byte & get 0 getiebuf (8BE9) : set 0 & get 1032 byte setfilter (8BEC) : set 4 byte & get 0
Again Sorry to highjack
Thankyou for your help in advance
Also i should add that i tried to install the new madwifi drivers with the following error.
Code:bt madwifi-0.9.4 # cd scritps bash: cd: scritps: No such file or directory bt madwifi-0.9.4 # cd scripts bt scripts # ./madwifi-unload.bash bt scripts # ./find-madwifi-modules.sh $(uname -r) WARNING: It seems that there are modules left from previous MadWifi installations. If you are unistalling the MadWifi modules please press "r" to remove them. If you are installing new MadWifi modules, you should consider removing those already installed, or else you may experience problems during operation. Remove old modules? [l]ist, [r]emove, [i]gnore or e[x]it (l,r,i,[x]) ? r bt scripts # cd .. bt madwifi-0.9.4 # make /bin/sh: line 0: cd: /lib/modules/2.6.21.5/build: No such file or directory Makefile.inc:66: *** /lib/modules/2.6.21.5/build is missing, please set KERNELPATH. Stop. bt madwifi-0.9.4 #
I'm very new to linux and im currently trying learn the basics so i apologize if i sound very stupid.
Also this a live cd
how to configure adsl modem??
i have problem connect to network ,
i use adsl modem , I already use will pppoe-setup , but still cannot connet to network ..
the pppoe status is already connect...
Posting Permissions