Just wanted to relay my experiences with the new PXE boot - distributed john piece. The PXE piece seems to work fine, I can get several other boxes to network boot from the backtrack box. John and mpd on the other hand didn't work so well, I put together the following script to setup the backtrack pxe server so mpd would run correctly. It creates a link for python2.4, creates the mpd.conf file with user selected password, sets the correct permissions for that file and then starts mpd in daemon mode.
In order for the PXE booted workstations to connect properly to the mpd server I had to make a couple changes. These include setting the correct 192.168.1.x ip address in the /etc/hosts file, creating the /etc/mpd.conf file with the right MPD_SECRETWORD password and then starting mpd with mpd --daemon --ncpus=<number of cpus on the box> -h 192.168.1.1 -p 10000
if [ ! -e /usr/bin/python2.4 ]; then
/bin/ln -s /usr/bin/python2.5 /usr/bin/python2.4
if [ ! -e /etc/mpd.conf ]; then
echo -n "Enter a password for mpd and press [ENTER] : "
echo MPD_SECRETWORD=$password > /etc/mpd.conf
/bin/chmod 600 /etc/mpd.conf
echo "Starting mpd in daemon mode....."
mpd --daemon --listenport=10000
That gets the mpd piece working, however, i could not get john working with the currently installed john versions. It seemed that neither the pxe booted workstations or the pxe boot server had the right mpich patched version of john. Once I got the patched version from hxxp://bindshell.net/tools/johntheripper/john-1.7.2-bp17-mpi6.tar.gz and put it on each of the workstations that I wanted to be included in the cluster things started working. I just needed to make sure the hash that I wanted to crack was on each box and that the path to john was the same across the board.
Hope that helps anyone that has been struggling with this.