Alfa r8187 + wpa2

[/S4NE/]

Hey guys,
someone got the fully patched Alfa driver working with wpa2 + AES ?

I´ve tried it for 2 days now and no luck...

Please post me some possibilities...


thanks

[Archangel-Amael]

please post us some results of your tests to see if someone can help you out.

[/S4NE/]

yes i´m sorry...i was @ work when i post it

here is my router config



here is my wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
eapol_version=2
ap_scan=0

network={
ssid="Hell Gate"
key_mgmt=WPA-PSK
proto=RSN
pairwise=CCMP
group=CCMP
# psk="0221065396555453"
psk=d797c159b5a46b26a582dcfd6e2ac7c02e8f2edd02e93a 111814e682e18595ef
}


and i ran wpa_supplicant like this

wpa_supplicant -w -Dwext -c/etc/wpa_supplicant.conf -iwlan0 -ddd

and here is the output

http://pastebin.com/m7533b204


Hope somebody can help me........

[/S4NE/]

Hey guys...

now i´m sure that my wpa_supplicant.conf is right...Got wpa working with my build in Intel3945, but the conf isn´t working with my Alfa Adapter...

Does anyone got the Alfa working with wpa and the drivers which are build in in backtrack3 beta...

Please help me

Thanks

[antragon]

Any news on that?

...I've no luck getting WPA running with that card as well...

[rongogo]

Any news on that?

...I've no luck getting WPA running with that card as well...

Read This, it' s from airocrack site:

Limitations
Injected Packets are not Captured

While in monitor mode, airodump-ng will not capture or record any packets injected by the aircrack-ng suite. This is a known problem with the driver.
Shared Key Authentication fails in managed mode

You receive one or more errors similar to:

    *
      Attempting to setup SKA mode: “iwconfig wlan0 mode managed key 1234567890 restricted” results in:

 Error for wireless request "Set Encode" (8B2A) :
 SET failed on device wlan0 ; Operation not supported.

    *
      ieee80211_auth_challenge_rt17+0x2fe/0×310 [ieee80211_rtl] kernel panic

SKA is not currently supported with the RTL8187 driver. There is no known workaround.

grtz RGG

[imported_=Tron=]

Read This, it' s from airocrack site:

Shared Key Authentication fails in managed mode

You receive one or more errors similar to:

    *
      Attempting to setup SKA mode: “iwconfig wlan0 mode managed key 1234567890 restricted” results in:

 Error for wireless request "Set Encode" (8B2A) :
 SET failed on device wlan0 ; Operation not supported.

SKA is not currently supported with the RTL8187 driver. There is no known workaround.

grtz RGG

You will need to use ndiwrapper to connect to WPA/WPA2 encrypted APs using the AUS036H card. A guide for anyone feeling unsure about the process a guide can be found here:http://forum.remote-exploit.org/showthread.php?t=15497

[Jano]

Hello,
read the manual (wpa supplicant) Incorporated in the beautiful driver rtl8187_linux_26.1010.0622.2006

But remember Alfa not support (with Linux) SKA (Shared Key Autentication), work only with driver for Windows

Bye, Jano