Page 20 of 20 FirstFirst ... 10181920
Results 191 to 197 of 197

Thread: [New Tutorial For BT3 ONLY]One bluetooth post to rule them all!

  1. #191
    Super Moderator Archangel-Amael's Avatar
    Join Date
    Jan 2010
    Location
    Somewhere
    Posts
    8,012

    Default

    Quote Originally Posted by rudolf View Post
    I have googled...
    So instead of telling me the obvious, could someone help me find the source for frontline please?
    So instead of telling you the obvious, here
    http://secdev.zoller.lu/btsniff/frontline.c
    The direct download.
    No need to apologize.
    Cheers
    To be successful here you should read all of the following.
    ForumRules
    ForumFAQ
    If you are new to Back|Track
    Back|Track Wiki
    Failure to do so will probably get your threads deleted or worse.

  2. #192
    Just burned his ISO
    Join Date
    Jul 2007
    Posts
    5

    Default

    Thank you.

  3. #193
    Just burned his ISO
    Join Date
    Aug 2009
    Posts
    2

    Default Unknown type: 4 error

    Hi folks,

    I followed dr.green's tutorial with a dlink dbt-120 adapter and got to the point where I can see the UP RUNNING RAW and on running the csrsniff.c (aka frontline.c) with a -t option I can see an incrementing timer. After that, when I enter something like:

    ./csrsniff -d hci0 -S 00:1D:6E:12:65:95@00:1F:6B:88:FF:BC

    then all I see is a bunch of "Unknown type: 4" messages. I tried it before pairing two mobile phones, during file transfer and with two linux pc's but i get the same message everytime. From the csrsniff.c file, this refers to a check in the program to confirm reception of a HCI_ACLDATA_PKT (which has a code 0x02) but instead all it receives right now is 0x04 (which is a HCI_EVENT_PKT).

    Any pointers for a solution ??

  4. #194
    Just burned his ISO
    Join Date
    Jan 2009
    Posts
    4

    Default

    I'm kinda confused with the commands of bluesnarfer and bluebugger.

    Can someone please give me a a example of what I could put in.
    (Sorry for the noobiness)

    Again sorry for the noobiness, but can someone post a video of exactly everything that happens.
    Detail for details, instructions and all. I learn better when i see it, rather then looking at words.

  5. #195
    Junior Member
    Join Date
    Jan 2010
    Posts
    76

    Default Any help!

    this is my bluetooth
    not sure about Part number: NW200NXT02

    hci0: Type: USB
    BD Address: 00:15:83:B3: D0:3B ACL MTU: 672:3 SCO MTU: 48:1
    UP RUNNING
    RX bytes:657 acl:0 sco:0 events:19 errors:0
    TX bytes:66 acl:0 sco:0 commands:17 errors:0
    Features: 0xff 0x3e 0x05 0x00 0x18 0x18 0x00 0x00
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
    Link policy:
    Link mode: SLAVE ACCEPT
    Name: 'ACER_ONE-677339'
    Class: 0x10010c
    Service Classes: Object Transfer
    Device Class: Computer, Laptop
    HCI Ver: 1.2 (0x2) HCI Rev: 0x1f4 LMP Ver: 1.2 (0x2) LMP Subver: 0x1f4
    Manufacturer: Integrated System Solution Corp. (57)

    hci0: Type: USB
    BD Address: 00:15:83:B3: D0:3B ACL MTU: 672:3 SCO MTU: 48:1
    Unsupported manufacturer

    Quote Originally Posted by simplepr View Post
    Ok I have managed to make a sniffing dongle work both in BT3 and in Windows. It is a dLink BT120 C1 flashed with 47bc4.dfu
    will this work?

    My intentions is to pass on what I learn from all this so I am inclined on writing a step by step tutorial for all this.
    these are good news!!!

    thanks

  6. #196
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    11

    Default

    First of all, wanted to thank everyone for posting info on this thread, especially Dr Green! Manage to sniff a Bluetooth pairing and crack the Link Key for a university assignment

    @ manulu

    As far as I know the DLink DBT120 you have linked to should work. Pretty sure the Rev C1 is the only one of the versions that is orange and black.

    Also wanted to mention that the DLink DBT120 Revision C1 worked fine for me as well with the firmware update.

  7. #197
    Just burned his ISO
    Join Date
    Oct 2009
    Posts
    4

    Exclamation bluetooth build script

    Hey everyone,

    I've combined all the necessary commands to setup bluetooth into a shell script. Hopefully this will take away alot of confusion. Can someone please take a look at it?

    The topic is called "Bluetooth setup (Blue-Buildv1.0c)" and its inside the BT3 howtos section.
    je moeder

Page 20 of 20 FirstFirst ... 10181920

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •