Association request

[psp219]

I have a WMP54G v 4.1 with BT2 and when i try to install the drivers for the rt61 wireless card, it says ra0 is deprecated.. is this right because when i do airmon-ng start ra0 it says unknown chipset and unknown driver monitor mode is not supported, but the thing is when im trying to do a fake authentication it says sending association request like 6 times and then just freezes there what shall i do?

[psp219]

This is an error message with my rt61 card its suppose to be patched because ic ompiled and installed from serial monkey but here it is
"Sending association request
Sending association request
Sending association request
Sending association request
Sending association request""
its like this for 5 minutes

[imported_wyze]

Out of curiosity, how many threads are you going to start revolving around the same issue with your wifi card...?

[-=Xploitz=-]

Out of curiosity, how many threads are you going to start revolving around the same issue with your wifi card...?

Evidently until he gets his "instant" answer from here...

http://forums.remote-exploit.org/showthread.php?t=10004

I have a WMP54G v 4.1 with BT2 and when i try to install the drivers for the rt61 wireless card, it says ra0 is deprecated.. is this right because when i do airmon-ng start ra0 it says unknown chipset and unknown driver monitor mode is not supported, but the thing is when im trying to do a fake authentication it says sending association request like 6 times and then just freezes there what shall i do?

Threads merged. Member psp219 verbally warned. Do not double post please. Be patient and help will come assuming you have given enough info on your problem.

[psp219]

how far do i have to be away from my access point cuz its on th e other side of my house which is around 70 feet away, if i cant associate with it, how do i build an antenna without destroying my current one?

[purehate]

If you are only 70 feet away then your problem is most likely somewhere else such as the most common problem: User error

[psp219]

is 70 feet and 3 walls a distance that it will still work at and also how do i check if injection works on in aircrack 0.9.1 ?

[Barry]

is 70 feet and 3 walls a distance that it will still work at and also how do i check if injection works on in aircrack 0.9.1 ?

What are the walls made out of?? Paper, wood, plywood, concrete, lead?? This is important info.

[purehate]

injection test

root@backtrack ~ # aireplay-ng -9 wlan0
20:30:58  Trying broadcast probe requests...
20:30:58  Injection is working!
20:30:59  Found 9 APs

20:30:59  Trying directed probe requests...
20:30:59  00:14:BF:B6:23:0E - channel: 6 - 'victimloser'
20:31:00  Ping (min/avg/max): 4.270ms/18.724ms/45.183ms Power: 95.97
20:31:00  30/30: 100%

20:31:00  00:14:6C:F6:36:78 - channel: 6 - 'CBC'
20:31:01  Ping (min/avg/max): 6.624ms/25.562ms/52.546ms Power: 23.20
20:31:01  30/30: 100%

20:31:01  00:06:25:DB:3E:7B - channel: 6 - 'linksys'
20:31:01  Ping (min/avg/max): 11.706ms/21.017ms/78.965ms Power: 25.17
20:31:01  30/30: 100%

20:31:01  00:1A:70:45:71:4C - channel: 6 - 'studio'
20:31:02  Ping (min/avg/max): 2.155ms/21.142ms/83.078ms Power: 14.03
20:31:02  29/30:  96%

20:31:02  00:0C:41:3E:2D:66 - channel: 6 - 'linksys'
20:31:03  Ping (min/avg/max): 3.146ms/15.055ms/34.710ms Power: 11.96
20:31:03  28/30:  93%

20:31:03  00:12:0E:7B:02:78 - channel: 6 - 'WEST7359'
20:31:04  Ping (min/avg/max): 3.496ms/13.896ms/49.294ms Power: 14.32
20:31:04  28/30:  93%

20:31:04  00:14:BF:0E:FE:CA - channel: 6 - 'snagrom1'
20:31:05  Ping (min/avg/max): 4.583ms/13.593ms/29.927ms Power: 9.00
20:31:05  25/30:  83%

20:31:05  00:13:46:44:A5:CE - channel: 6 - 'default'
20:31:10  Ping (min/avg/max): 1.460ms/6.186ms/10.549ms Power: 11.29
20:31:10   7/30:  23%

20:31:10  00:1A:70:83:B0:1C - channel: 6 - 'linksys'
20:31:12  Ping (min/avg/max): 4.454ms/10.834ms/20.759ms Power: 9.18
20:31:12  22/30:  73%

root@backtrack ~ #

[psp219]

wood and plywood i think just can someone tell me what is the rate of injection?

dude the aireplay-ng -9 command doesnt work anymore in 0.9.1