Results 1 to 6 of 6

Thread: [HOW TO] Packet injection mode for Intel 3945 wireless card in backtrack 2

Hybrid View

  1. #1
    Very good friend of the forum drgr33n's Avatar
    Join Date
    Jan 2010
    Location
    Dark side of the moon ...
    Posts
    699

    Default [HOW TO] Packet injection for Intel 3945 wireless card in backtrack 2

    Hey guys

    You need packet injection for Intel's 3945 card? Here's how its done.

    First thing to say is the backtrack 2 kernel 2.6.20 is already prepared for these drivers.

    1. Download the drivers

    Code:
    mkdir intel-drivers && cd intel-drivers
    wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/ipwraw-ng-2.0.0-10072007.tar.bz2
    2. Extract the drivers

    Code:
    tar -xjf ipwraw-ng-2.0.0-10072007.tar.bz2
    cd ipwraw-ng
    3. Compile & Install & Blacklist from startup

    Code:
    make && make install
    make install_ucode
    echo "blacklist ipwraw" | sudo tee /etc/modprobe.d/ipwraw
    depmod -ae
    And now you should be ready to fire up your 3945 card in monitor mode. To start in monitor mode.

    Code:
    modprobe -r ipw3945
    modprobe ipwraw
    Your Card name will be wifi0 not eth0 use wifi0 to inject. For eg

    Code:
    aireplay-ng --test wifi0
    And to swap back to normal mode

    Code:
    modprobe -r ipwraw
    modprobe ipw3945
    I did just post this at the end of somebody elses post but I thought I'd post a guide for search engines ETC

    This info was taken from the aircrack-ng site.

    Enjoy

  2. #2
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    11

    Default

    Is there a way to do this with the intel 4965 card?

  3. #3
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    2

    Default

    I have the same problem too, is there any way to do this with intel 4965?

  4. #4
    Just burned his ISO
    Join Date
    Feb 2008
    Posts
    4

    Default

    first of all my english too bad sorry for that i have Intel's 3945 card i wanna handshake but i dont do Card name is eth1 .for handshake , card name must be wifi0? for that i do this way

  5. #5
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    14

    Default

    I think they are still working on it for the 4965. I have the same card and have been reading up on it. A few people got injection working but not that well, bugs, airodump stopped recording etc...

  6. #6
    Just burned his ISO
    Join Date
    Feb 2008
    Posts
    4

    Default

    first of all my english too bad sorry for that i have Intel's 3945 card i wanna handshake but i dont do Card name is eth1 .for handshake , card name must be wifi0? for that i do this way

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •