Results 1 to 9 of 9

Thread: D-Link DWA-652

  1. #1
    Just burned his ISO
    Join Date
    Nov 2007
    Posts
    10

    Default D-Link DWA-652

    Does anyone know if the DWA-652 D-Link card works with bt2? before you start harrassing me I've already checked the tested cards and it doesn't show up on the list. if you've tried this card or own it could you let me know? thanks.

  2. #2
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by TruVisionary View Post
    Does anyone know if the DWA-652 D-Link card works with bt2? before you start harrassing me I've already checked the tested cards and it doesn't show up on the list. if you've tried this card or own it could you let me know? thanks.

    According to this...




    Its an Atheros AR5416 chipset. And that chipset fully supports monitor mode, injection, and all attacks and captures WEP and WPA/WPA2 traffic.

    Nice card...but a little pricey. But it supports the N network..so thats a plus.



    I'll stick to my 25 dollar Airlink AWLC4130 from Frys. Atheros chipset, and same dual diversity printed PCB's for soldering 2 antenna feeds onto it as this one. Only difference in the 2 cards is price and yours supports B/G/N and mine only supports b/g.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  3. #3
    Just burned his ISO
    Join Date
    Nov 2007
    Posts
    10

    Default

    thanx -=Xploitz=-

  4. #4
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by TruVisionary View Post
    thanx -=Xploitz=-
    Anytime.


    Thats what they pay me the big bucks here on the forum for.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  5. #5
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    2

    Default I have the same card

    I actually have the same model DWA-652 PCMCIA and it isn't being detected. A simple ifconfig -a returns :
    Code:
    eth0      Link encap:Ethernet  HWaddr 00:0A:E4:E0:A0:93
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:10 Base address:0x4000
    
    eth1      Link encap:Ethernet  HWaddr 00:12:F0:2C:96:57
              inet addr:192.168.1.112  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::212:f0ff:fe2c:9657/64 Scope:Link
              UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:3492 errors:0 dropped:0 overruns:0 frame:0
              TX packets:2630 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:3832644 (3.6 MiB)  TX bytes:525922 (513.5 KiB)
              Interrupt:10 Base address:0x2000 Memory:b8006000-b8006fff
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    eth0 is the NIC and and eth1 is the internal wireless (using ipw2200 and working fairly fine with the exception of injection).

    The laptop in question is an acer TravelMate C310.

    In the BT wiki it stated the DWA-642, which uses the same chipset as the DWA-652, needed the newest drivers from madwifi. And of course, after googling the error I received when attemping to make the new madwifi-ng driver, I can up empty handed.

    Any one care to shed some light on this issue for me? I have not been able to find an appropriate post or search result after a week now.

  6. #6
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by apokzilla View Post
    And of course, after googling the error I received when attemping to make the new madwifi-ng driver, I can up empty handed.

    Any one care to shed some light on this issue for me? I have not been able to find an appropriate post or search result after a week now.

    Download this.....

    Code:
    http://downloads.sourceforge.net/madwifi/madwifi-0.9.3.3.tar.gz?modtime=1192683135&big_mirror=0
    Then do this...

    ifconfig ath0 down
    ifconfig wifi0 down
    cd scripts
    ./madwifi-unload.bash
    ./find-madwifi-modules.sh $(uname -r)
    cd ..
    make
    make install
    modprobe ath_pci

    Now reboot, and you should be good to go.

    Let me know if this helped ya out apokzilla.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  7. #7
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    2

    Default

    I'll try this when I return from class.

    I'm assuming you want me to bring down the two ath0 and widi0 interfaces just to prevent installation conflicts because I have neither interfaces detected nor up.

    By the way, this looks promising.

    Appreciate it -=Xploitz=-,
    apok

    I ran find modules and removed the currently installed madwifi modules. But then after cd to the madwifi-0.9.3.3 and running the make command, I received the following error:
    Code:
    bt madwifi-0.9.3.3 # make
    /bin/sh: line 0: cd: /lib/modules/2.6.20-BT-PwnSauce-NOSMP/build: No such file or directory
    Makefile.inc:66: *** /lib/modules/2.6.20-BT-PwnSauce-NOSMP/build is missing, please set KERNELPATH.  Stop.
    bt madwifi-0.9.3.3 # make install
    /bin/sh: line 0: cd: /lib/modules/2.6.20-BT-PwnSauce-NOSMP/build: No such file or directory
    Makefile.inc:66: *** /lib/modules/2.6.20-BT-PwnSauce-NOSMP/build is missing, please set KERNELPATH.  Stop.
    I'm using hackin9.live v.4.0.3 installed to my HD. You think the kernel build from the hackin9 cd is what is causing this? Should I reinstall BackTrack 2 from another source?

    Good news. I went ahead and downloaded the BT3 Beta and I'm running the live cd right now. It automatically booted up my DWA-652 as ath0. woot!

    I'm assuming whatever distro I had on that cd was not complete. Thanks, Xploitz for you knowledge and input!

  8. #8
    Just burned his ISO
    Join Date
    Feb 2008
    Posts
    6

    Default

    I want to know how I can put my wireless adapter in monitor mode.

    I've searched and found out that I need some special driver to do that , some1 know where I can find that or it will work if I install BT2 ?

    sry for bringing back the thread

  9. #9
    Senior Member
    Join Date
    Apr 2008
    Posts
    2,008

    Default

    Quote Originally Posted by sammael View Post
    I want to know how I can put my wireless adapter in monitor mode.

    I've searched and found out that I need some special driver to do that , some1 know where I can find that or it will work if I install BT2 ?

    sry for bringing back the thread
    If you have the same card that is being discussed in this thread it should be supported by the madwifi drivers included in BT3F out of the box.
    -Monkeys are like nature's humans.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •