Is this WUSB54GC v1 (silver) or v3 (black)?
OS: BackTrack 5 R1 KDE 32bit
Make: Linksys WUSB54GC
Chipset: Ralink 2573 USB
Driver: rt73usb
Injection: Yes
Method: Worked out of the box
Code:root@bt:~# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:18:f8:a4:9e:xx UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@bt:~# iwconfig wlan0 wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on root@bt:~# lsusb Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 13b1:0020 Linksys WUSB54GC 802.11g Adapter [ralink rt73] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@bt:~# ls -l /sys/class/net/wlan0/device/driver lrwxrwxrwx 1 root root 0 2011-10-11 15:40 /sys/class/net/wlan0/device/driver -> ../../../../../../bus/usb/drivers/rt73usb root@bt:~# lsmod | grep -i rt73usb rt73usb 23499 0 crc_itu_t 1319 1 rt73usb rt2x00usb 9319 1 rt73usb rt2x00lib 33886 2 rt73usb,rt2x00usb root@bt:~# airmon-ng Interface Chipset Driver wlan0 Ralink 2573 USB rt73usb - [phy0] root@bt:~# airmon-ng start wlan0 13 Found 3 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them! PID Name 768 NetworkManager 1029 wpa_supplicant 1042 dhclient Interface Chipset Driver wlan0 Ralink 2573 USB rt73usb - [phy5] (monitor mode enabled on mon0) root@bt:~# aireplay-ng -9 mon0 00:02:53 Trying broadcast probe requests... 00:02:53 Injection is working! 00:02:55 Found 1 AP 00:02:55 Trying directed probe requests... 00:02:55 00:19:5B:E7:52:xx - channel: 13 - 'SSID' 00:02:55 Ping (min/avg/max): 2.346ms/5.664ms/10.617ms Power: -66.40 00:02:55 30/30: 100% root@bt:~#
Last edited by g0tmi1k; 10-11-2011 at 02:40 PM.
Have you...g0tmi1k?
Is this WUSB54GC v1 (silver) or v3 (black)?
root@bt:~# ifconfig wlan0
wlan0 Link encap:UNSPEC HWaddr 00-11-22-33-44-55-00-00-00-00-00-00-00-00-00-00
UP BROADCAST NOTRAILERS RUNNING PROMISC ALLMULTI MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1169 (1.1 KB) TX bytes:0 (0.0 B)
root@bt:~# iwconfig wlan0
wlan0 IEEE 802.11bg Mode:Monitor Frequency:2.452 GHz Tx-Power=20 dBm
Retry long limit:7 RTS thrff Fragment thr
ff
Power Managementn
root@bt:~# lsusb
Bus 001 Device 006: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
Bus 001 Device 003: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@bt:~# ls -l /sys/class/net/wlan0/device/driver
lrwxrwxrwx 1 root root 0 2013-01-13 09:09 /sys/class/net/wlan0/device/driver -> ../../../../../../bus/usb/drivers/rt73usb
root@bt:~# lsmod | grep -i rt73usb
rt73usb 26601 0
crc_itu_t 12523 1 rt73usb
rt2x00usb 19162 1 rt73usb
rt2x00lib 46110 2 rt73usb,rt2x00usb
root@bt:~# airmon-ng
Interface Chipset Driver
mon1 Ralink 2573 USB rt73usb - [phy0]
mon0 Ralink 2573 USB rt73usb - [phy0]
wlan0 Ralink 2573 USB rt73usb - [phy0]
mon2 Ralink 2573 USB rt73usb - [phy0]
root@bt:~# airmon-ng start wlan0 13
Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!
PID Name
643 dhclient3
1829 dhclient3
Process with PID 1829 (dhclient3) is running on interface wlan0
Interface Chipset Driver
mon1 Ralink 2573 USB rt73usb - [phy0]
mon0 Ralink 2573 USB rt73usb - [phy0]
wlan0 Ralink 2573 USB rt73usb - [phy0]
(monitor mode enabled on mon3)
mon2 Ralink 2573 USB rt73usb - [phy0]
root@bt:~# aireplay-ng -9 mon0
09:47:36 Trying broadcast probe requests...
09:47:37 No Answer...
09:47:37 Found 0 APs
root@bt:~#
I didn't get any AP, while i turn 1 of my wifi router to test beside me.
any idea ?
Linksys WUSB54GC (Ralink 2573 USB - rt73usb)
OS: BackTrack 5 R3 KDE 64bit
Make: Linksys WUSB54GC
Chipset: Ralink 2573 USB
Driver: rt73usb
[code]
root@bt:/opt/metasploit# ifconfig -a
eth1 Link encap:Ethernet HWaddr 08:00:27:93:1c:db
inet addr:192.168.0.130 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe93:1cdb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16457 errors:0 dropped:0 overruns:0 frame:0
TX packets:11582 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7671409 (7.6 MB) TX bytes:1505263 (1.5 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:102556 errors:0 dropped:0 overruns:0 frame:0
TX packets:102556 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15141386 (15.1 MB) TX bytes:15141386 (15.1 MB)
mon0 Link encap:UNSPEC HWaddr 00-1E-E5-28-00-4B-00-00-00-00-00-00-00-00-00-00
UP BROADCAST NOTRAILERS RUNNING PROMISC ALLMULTI MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:1e:e5:28:00:4b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@bt:/opt/metasploit# iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"AAFA760"
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thrff Fragment thr
ff
Encryption keyff
Power Managementn
root@bt:/opt/metasploit# aireplay-ng -9 mon0
14:55:40 Trying broadcast probe requests...
14:55:42 No Answer...
14:55:42 Found 0 APs
[code/]
Did I miss something?
I did I missed the channel settings for airmon-ng. it works now.