@maverik35:
which info I should provide? also tested to install the propietary but then optirun isn't working anymore.
I installed the driver from ppa:glasen/intel-driver
during startx the i915 is loaded normally (see /var/logs/Xorg.0.log)
http://pastebin.com/PkS2uiCt
but I have to connect an external screen via VGA to get a picture on screen. notebook still flickers
lsmod: (after startx)
Code:
Module Size Used by
rfcomm 46309 12
i915 452905 2
drm_kms_helper 40041 1 i915
drm 225891 3 i915,drm_kms_helper
i2c_algo_bit 13156 1 i915
joydev 17457 0
snd_hda_codec_hdmi 31994 1
snd_hda_codec_ca0132 18236 1
bbswitch 13355 0
snd_hda_intel 33175 0
snd_hda_codec 110336 3 snd_hda_codec_hdmi,snd_hda_codec_ca0132,snd_hda_intel
snd_hwdep 13554 1 snd_hda_codec
snd_pcm 92879 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
arc4 12529 2
dell_wmi 12681 0
snd_seq_midi 13324 0
snd_rawmidi 29179 1 snd_seq_midi
sparse_keymap 13526 1 dell_wmi
snd_seq_midi_event 14436 1 snd_seq_midi
snd_seq 60549 2 snd_seq_midi,snd_seq_midi_event
ath9k 134009 0
mac80211 478885 1 ath9k
snd_timer 28838 2 snd_pcm,snd_seq
snd_seq_device 14129 3 snd_seq_midi,snd_rawmidi,snd_seq
ath9k_common 13604 1 ath9k
ath9k_hw 401846 2 ath9k,ath9k_common
snd 64384 10 snd_hda_codec_hdmi,snd_hda_codec_ca0132,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ath 22992 3 ath9k,ath9k_common,ath9k_hw
atl1c 40498 0
cfg80211 190023 3 ath9k,mac80211,ath
rts_pstor 435118 0
soundcore 12598 1 snd
psmouse 72820 0
sdhci_pci 18683 0
snd_page_alloc 18101 2 snd_hda_intel,snd_pcm
mei 40623 0
serio_raw 13211 0
sdhci 31728 1 sdhci_pci
ath3k 12862 0
uvcvideo 67221 0
btusb 18371 0
usbhid 46275 0
videodev 93508 1 uvcvideo
lp 17789 0
bluetooth 166564 5 rfcomm,ath3k,btusb
hid 97618 1 usbhid
parport 44368 1 lp
v4l2_compat_ioctl32 20896 1 videodev
aufs 183689 0
wmi 18697 1 dell_wmi
video 18858 1 i915
modinfo i915:
Code:
root@bt:~# modinfo i915
filename: /lib/modules/3.2.6/kernel/drivers/gpu/drm/i915/i915.ko
license: GPL and additional rights
description: Intel Graphics
author: Tungsten Graphics, Inc.
license: GPL and additional rights
srcversion: 951D8FD7124BD3EC25E7BD9
depends: drm,drm_kms_helper,video,i2c-algo-bit
intree: Y
vermagic: 3.2.6 SMP mod_unload
parm: modeset:Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, 1=on, -1=force vga console preference [default]) (int)
parm: fbpercrtc:int
parm: panel_ignore_lid:Override lid status (0=autodetect [default], 1=lid open, -1=lid closed) (int)
parm: powersave:Enable powersavings, fbc, downclocking, etc. (default: true) (int)
parm: semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
parm: i915_enable_rc6:Enable power-saving render C-state 6 (default: -1 (use per-chip default) (int)
parm: i915_enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
parm: lvds_downclock:Use panel (LVDS/eDP) downclocking for power savings (default: false) (int)
parm: lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
parm: vbt_sdvo_panel_type:Override selection of SDVO panel mode in the VBT (default: auto) (int)
parm: reset:Attempt GPU resets (default: true) (bool)
parm: enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
Do I need maybe a /etc/X11/xorg.conf file to get the notebook display working??