problem wirh RFID Cooking with Mifira Classic

[Lancha]

Hello everybody i have the problem i using Backtrack 5 r3 gnome version in HDD
first i use this comand to start the card reader

pcscd -f -d and have this
00000000 debuglog.c:224:DebugLogSetLevel() debug level=debug
00000814 pcscdaemon.c:505:main() pcsc-lite 1.5.3 daemon ready.
00222077 hotplug_libusb.c:477:HPAddHotPluggable() Adding USB device: 003:002
00000067 readerfactory.c:1024:RFInitializeReader() Attempting startup of ACS ACR122U PICC Interface 00 00 using /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
00000289 readerfactory.c:877:RFBindFunctions() Loading IFD Handler 3.0
00000069 ifdhandler.c:1532:init_driver() Driver version: 1.3.11
00000837 ifdhandler.c:1545:init_driver() LogLevel: 0x0003
00000685 ifdhandler.c:1565:init_driver() DriverOptions: 0x0005
00000019 ifdhandler.c:82:IFDHCreateChannelByName() lun: 0, device: usb:072f/2200:libusb:003:002
00001312 ccid_usb.c:285:OpenUSBByName() Manufacturer: Ludovic Rousseau (ludovic.rousseau@free.fr)
00000686 ccid_usb.c:295:OpenUSBByName() ProductString: Generic CCID driver
00000671 ccid_usb.c:301:OpenUSBByName() Copyright: This driver is protected by terms of the GNU Lesser General Public License version 2.1, or (at your option) any later version.
00063835 ccid_usb.c:501:OpenUSBByName() Found Vendor/Product: 072F/2200 (ACS ACR122U PICC Interface)
00000035 ccid_usb.c:503:OpenUSBByName() Using USB bus/device: 003/002
00000016 ccid_usb.c:852:ccid_check_firmware() Firmware (1.03) is bogus! but you choosed to use it
00001112 ccid_usb.c:893:get_data_rates() IFD does not support GET_DATA_RATES request: Success
00013963 ifdhandler.c:364:IFDHGetCapabilities() tag: 0xFB0, usb:072f/2200:libusb:003:002 (lun: 0)
00000114 readerfactory.c:249:RFAddReader() Using the pcscd polling thread
00003992 ifdhandler.c:364:IFDHGetCapabilities() tag: 0xFAE, usb:072f/2200:libusb:003:002 (lun: 0)
00000034 ifdhandler.c:418:IFDHGetCapabilities() Reader supports 1 slot(s)
00000038 hotplug_libusb.c:403:HPEstablishUSBNotifications() Driver ifd-ccid.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
00000014 hotplug_libusb.c:412:HPEstablishUSBNotifications() Polling forced every 1 second(s)
00007813 ifdhandler.c:1043:IFDHPowerICC() action: PowerUp, usb:072f/2200:libusb:003:002 (lun: 0)
00054080 Card ATR: 3B BE 95 00 00 41 03 00 00 00 00 00 00 00 00 00 02 90 00

when i use the nfc-list have this

nfc-list use libnfc 1.4.2 (r891)
Connected to NFC device: ACS ACR122U PICC Interface 00 00 / ACR122U103 - PN532 v1.6 (0x07)

when i run the mfoc -P 500 -O card_dump say this
nfc_initiator_select_passive_target: Success

how i fix the problem
i use the backtrack wiki to install
my card reader is touchatag starter kit
sorry i find the problem is i not testing with with smart card
the post can be close
sorry people