Belkin G+ usb adapter help

[muhaa]

Hi all im new to linux so please be patient i will try to explain my problem.
I cannot seam to get my usb dongle thingy to work with bt 2 Ive tried every thing from using the Rt2570 drivers to using ndiswrapper.
Im not sure what information i need to give you to get some help i wrote the number here off the back of the usb stick

F5D7051

Im not sure if this is enough information but if you need more just let me know.

Thanks

[shamanvirtuel]

post lsusb output

iwconfig

ifconfig -a

[muhaa]

Usb card information Card:
Belkin F5D7051 (USB 2.0 Adaptor 802.11g 125Mbps)

iwconfig

lo no wireless extensions.
eth0 no wireless extensions.



lsusb -v

Bus 004 Device 003: ID 050d:7051 Belkin Components
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x050d Belkin Components
idProduct 0x7051
bcdDevice 0.06
iManufacturer 1 Broadcom
iProduct 2 Belkin High-Speed Mode Wireless G USB Network Adapter
iSerial 3 8057
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 48
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Connection timed out
Device Status: 0x0000
(Bus Powered)


Code:

[muhaa]

Sorry for the double post i managed to get it to work but ndiswrapper does not let me put my usb adapter into monitor mode any one have any other ideas.

[shamanvirtuel]

no monitor mode with ndiswrapper, only one solution : buy a compatible card !