Results 1 to 7 of 7

Thread: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

  1. #1
    Just burned his ISO
    Join Date
    Jan 2011
    Posts
    12

    Default How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    Code:
    wget http://developer.amd.com.php53-23.ord1-1.websitetestlink.com/wordpress/media/files/AMD-APP-SDK-v2.7-lnx64.tgz && wget http://www2.ati.com/drivers/linux/amd-driver-installer-catalyst-12.10-x86.x86_64.zip && svn co https://calpp.svn.sourceforge.net/svnroot/calpp calpp
    unzip amd-driver-installer-catalyst-12.10-x86.x86_64.zip && tar xf AMD-APP-SDK-v2.7-lnx64.tgz && tar xf icd-registration.tgz && chmod +x amd-driver-installer-catalyst-12.10-x86.x86_64.run && ./amd-driver-installer-catalyst-12.10-x86.x86_64.run
    sh Install-AMD-APP.sh
    apt-get install libroot-python-dev libboost-python-dev zlib1g-dev libssl-dev cmake libboost-all-dev
    exit
    restart
    Once It's rebooted,
    Code:
    startx
    and then
    Code:
    prepare-kernel-sources
    cd /usr/src/linux
    cp -rf include/generated/* include/linux/
    cd
    echo "ATISTREAMSDKROOT=/opt/AMDAPP
    export ATISTREAMSDKROOT" >> ~/.bashrc
    source ~/.bashrc
    cd calpp/trunk/
    cmake .
    make -j$(cat /proc/cpuinfo | grep processor | wc -l)
    make install
    cd
    cd pyrit_svn/pyrit/ && python setup.py build
    cd 
    cd pyrit_svn/cpyrit_opencl/ && python setup.py build && python setup.py install
    pyrit list_cores && pyrit benchmark
    and you'll get the graphic stream processors
    Code:
    pyrit list_cores && pyrit benchmark
    Pyrit 0.4.1-dev (svn r308) (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    The following cores seem available...
    #1:  'OpenCL-Device 'Devastator''
    #2:  'CPU-Core (SSE2/AES)'
    #3:  'CPU-Core (SSE2/AES)'
    #4:  'CPU-Core (SSE2/AES)'
    Pyrit 0.4.1-dev (svn r308) (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    Running benchmark (8972.6 PMKs/s)... / 
    
    Computed 8972.59 PMKs/s total.
    #1: 'OpenCL-Device 'Devastator'': 8114.2 PMKs/s (RTT 2.8)
    #2: 'CPU-Core (SSE2/AES)': 585.8 PMKs/s (RTT 3.3)
    #3: 'CPU-Core (SSE2/AES)': 562.9 PMKs/s (RTT 3.0)
    #4: 'CPU-Core (SSE2/AES)': 558.1 PMKs/s (RTT 3.3)
    but on screen it display up to 9200 PMKs/s not so bad for and a green quiet pc based on a Amd A8-5500 (non-overclockable) with stock cpu cooler at about 300€
    Last edited by sickness; 11-24-2012 at 01:02 PM.

  2. #2
    Just burned their ISO
    Join Date
    Apr 2012
    Posts
    6

    Default RE: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    I don't have reply access to the "howto" section, so...

    http://www.backtrack-linux.org/forum...ad.php?t=55188

    Code:
    Running benchmark (8972.6 PMKs/s)... / 
    
    Computed 8972.59 PMKs/s total.
    #1: 'OpenCL-Device 'Devastator'': 8114.2 PMKs/s (RTT 2.8)
    #2: 'CPU-Core (SSE2/AES)': 585.8 PMKs/s (RTT 3.3)
    #3: 'CPU-Core (SSE2/AES)': 562.9 PMKs/s (RTT 3.0)
    #4: 'CPU-Core (SSE2/AES)': 558.1 PMKs/s (RTT 3.3)
    Pyrit is running in OpenCL mode, not Cal++

    Unfortunately, the usual source for the additional AMD APP libs for Cal++ has not been updated since 2.5 (i.e. no HD7000 series support).

    If you have HD7000 series, the above guide for OpenCL will give best results.
    If you have HD4000/5000/6000 series, you can get Cal++ working (ie. a lot more speed) using my guide, based on older drivers & SDK here
    Last edited by n3lson; 12-09-2012 at 12:58 AM. Reason: removed Cal++ instructions (didn't work), linked alternate Cal++ guide for older chipsets

  3. #3
    Just burned their ISO
    Join Date
    Dec 2012
    Posts
    2

    Default Re: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    Quote Originally Posted by ut0ugh1 View Post
    Code:
    apt-get install libroot-python-dev libboost-python-dev zlib1g-dev libssl-dev cmake libboost-all-dev
    Hey,
    I'm running 64-bit BackTrack 5 R3 on my harddisk(Clevo P150em laptop). I've been able to follow all of the steps listed here, and here
    http://www.backtrack-linux.org/wiki/...Install_OpenCL

    Except for the line I quoted.
    The only package that I am having trouble installing is "libboost-all-dev". The command returns an error and states that the cause is unmet dependencies
    Code:
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:
    
    The following packages have unmet dependencies:
      libboost1.40-all-dev: Depends: libboost-iostreams1.40-dev but it is not going to be installed
                            Depends: libboost-regex1.40-dev but it is not going to be installed
    E: Broken packages
    I tried adding the -f flag, but that didn't succeed either.
    I also tried installing the dependencies explicitly, but those had the same issue.

    Any ideas?

    Thanks,
    Branden Clark

  4. #4
    Just burned his ISO
    Join Date
    Jan 2011
    Posts
    12

    Default Re: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    try
    Code:
    apt-get install libboost* -y
    it would work
    Last edited by ut0ugh1; 12-07-2012 at 05:03 PM.

  5. #5
    Just burned their ISO
    Join Date
    Dec 2012
    Posts
    2

    Default Re: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    I can't tell if it's working because after rebooting, startx just hangs me at a black screen. after outputting some text to the screen. I tried redirecting the output to a file for more info but the file was empty after a hard restart.
    I tried one solution, which involved adding an option to a line in grub, but I still got a black screen.

  6. #6
    Just burned their ISO
    Join Date
    Apr 2012
    Posts
    6

    Default Re: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    adriancard posted a fix for these dependency errors on another thread here

  7. #7
    Just burned their ISO
    Join Date
    Dec 2012
    Posts
    2

    Default Re: How install AMD APU driver+AMD 2.7 SDK+calpp+cpyrit on a BT5 R3 64bit desktop apu

    hi...
    iḿ running backtrack 5 r3 and i have been follow several tutorials and articles, but i don't have any success, inclusively i published my error in a post and nothing.
    my graphics is a ATI RADEON HD 3650... and i want configure them to run oclhashcat plus...
    can you help me, thanks

Similar Threads

  1. Make error Calpp for pyrit on BT 5 r2/3
    By Jeroenvane in forum BackTrack 5 Beginners Section
    Replies: 3
    Last Post: 11-06-2012, 02:08 AM
  2. cannot install backtrack 5 32/64bit due to graphical errors
    By daeda in forum BackTrack 5 Beginners Section
    Replies: 0
    Last Post: 12-27-2011, 09:37 PM
  3. After-Install Script for BT5 KDE-64bit
    By Bindi in forum BackTrack 5 General Topics
    Replies: 0
    Last Post: 06-15-2011, 11:22 PM
  4. Can't install bt r1 on my 64bit system any ideas?
    By niel66 in forum Beginners Forum
    Replies: 1
    Last Post: 11-04-2010, 08:34 PM
  5. Belkin (F5D8001) N1 Wireless Desktop Card - Driver needed.
    By imported_eXtremer in forum OLD Newbie Area
    Replies: 5
    Last Post: 06-12-2009, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •