Results 1 to 3 of 3

Thread: networking wired problem :)

  1. #1
    Just burned their ISO
    Join Date
    Nov 2012
    Posts
    3

    Cool networking wired problem :)

    hello
    1st I am sorry for my bad English
    2nd
    I installed BT 5 R3 Gnome
    as a default Os

    every thing go OK except networking
    I have tried every thing to solve this problem
    and I didn't gain any thing

    I tried every thing in this topic
    but also no way
    here is the topic

    and I will list all results here for terminal
    Code:
    root@bt:~#  airmon-ng
    
    
    Interface    Chipset        Driver
    
    
    root@bt:~#  service network-manager start
    network-manager: unrecognized service
    root@bt:~#  ifconfig eth0 down
    root@bt:~#  wicd stop
    root@bt:~#  /etc/init.d/networking stop
     * Deconfiguring network interfaces...                                          There is already a pid file /var/run/dhclient.eth0.pid with pid 1113
    killed old client process, removed PID file
    Internet Systems Consortium DHCP Client V3.1.3
    Copyright 2004-2009 Internet Systems Consortium.
    All rights reserved.
    For info, please visit https://www.isc.org/software/dhcp/
    
    Listening on LPF/eth0/00:24:1d:bc:36:02
    Sending on   LPF/eth0/00:24:1d:bc:36:02
    Sending on   Socket/fallback
    DHCPRELEASE on eth0 to 10.0.0.2 port 67
                                                                             [ OK ]
    root@bt:~# service networking stop
    stop: Unknown instance: 
    root@bt:~#  /etc/init.d/networking start
    Rather than invoking init scripts through /etc/init.d, use the service(8)
    utility, e.g. service networking start
    
    Since the script you are attempting to invoke has been converted to an
    Upstart job, you may also use the start(8) utility, e.g. start networking
    
    networking stop/waiting
    root@bt:~# 
    root@bt:~# start networking
    networking stop/waiting
    root@bt:~#  wicd start
    root@bt:~#  ifconfig eth0 up 
    root@bt:~# ping www.google.ie
    connect: Network is unreachable
    root@bt:~# /etc/network/interfaces file
    bash: /etc/network/interfaces: Permission denied
    root@bt:~# cat /etc/network/interfaces 
    auto lo
    iface lo inet loopback
    
    auto eth0
    iface eth0 inet dhcp
    
    auto eth1
    iface eth1 inet dhcp
    
    auto eth2
    iface eth2 inet dhcp
    
    auto ath0
    iface ath0 inet dhcp
    
    auto wlan0
    iface wlan0 inet dhcp
    
    root@bt:~# update-rc.d networking defaults
    update-rc.d: warning: networking start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none)
    update-rc.d: warning: networking stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (0 6)
     Adding system startup for /etc/init.d/networking ...
       /etc/rc0.d/K20networking -> ../init.d/networking
       /etc/rc1.d/K20networking -> ../init.d/networking
       /etc/rc6.d/K20networking -> ../init.d/networking
       /etc/rc2.d/S20networking -> ../init.d/networking
       /etc/rc3.d/S20networking -> ../init.d/networking
       /etc/rc4.d/S20networking -> ../init.d/networking
       /etc/rc5.d/S20networking -> ../init.d/networking
    root@bt:~# 
    root@bt:~# nano /root/.bash_profile
    root@bt:~# ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:24:1d:bc:36:02  
              inet addr:10.0.0.133  Bcast:10.0.0.255  Mask:255.255.255.0
              inet6 addr: fe80::224:1dff:febc:3602/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:5595 errors:0 dropped:0 overruns:0 frame:0
              TX packets:199 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:1086789 (1.0 MB)  TX bytes:19051 (19.0 KB)
              Interrupt:42 Base address:0x8000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:34 errors:0 dropped:0 overruns:0 frame:0
              TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:2265 (2.2 KB)  TX bytes:2265 (2.2 KB)
    
    root@bt:~# route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth0
    root@bt:~# cat /etc/resolv.conf
    nameserver 10.0.0.2
    nameserver 8.8.8.8
    nameserver 8.8.4.4
    root@bt:~# sudo route add default gw 1.1.1.1
    SIOCADDRT: No such process
    root@bt:~#  route add default gw 1.1.1.1
    SIOCADDRT: No such process
    root@bt:~# route add default gw 1.1.1.1
    SIOCADDRT: No such process
    root@bt:~#
    please help me
    I am at this problem from 15 oct
    my internet is wired not wirless
    and I have windows seven
    as another os
    and internet is good at it


  2. #2
    Just burned their ISO
    Join Date
    Nov 2012
    Posts
    3

    Default Re: networking wired problem :)

    one day left
    and 45 views and no answer

  3. #3
    Just burned their ISO
    Join Date
    Nov 2012
    Posts
    3

    Default Re: networking wired problem :)

    I hoped to find a solution
    But seems no way to it
    i will try any other package
    thanks a lot

Similar Threads

  1. wired network problem
    By kaxen in forum BackTrack 5 Beginners Section
    Replies: 3
    Last Post: 08-17-2011, 11:28 AM
  2. Problem with wired connection please help!
    By Ashj105 in forum Beginners Forum
    Replies: 1
    Last Post: 04-14-2011, 05:18 PM
  3. Problem with wifi/wired internet
    By ootuoyetahi in forum Beginners Forum
    Replies: 1
    Last Post: 03-09-2010, 05:01 PM
  4. -=SOLVED=- Networking Problem (no wired LAN)
    By kastro in forum OLD Newbie Area
    Replies: 4
    Last Post: 10-15-2007, 06:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •