After so many trying i succeded to install BCM4323 Chipset USB-Wifi on Backtrack 5 x86 Gnome.
Just I want to share with you how i did this;
~~ My worked driver is here, you can download from there ~~
Choose Product : Air 2410
Choose Country : Turkey
Choose your version : v2
and choose the old driver : http://www.airties.com/firmwares/Air..._184.108.40.206.8.zip
Going for installation now :
I used ndiswrapper for this installation.
First we need "Synaptic package manager" for install ndiswrapper.
After installing Synaptic just open it, and search ndiswrapper > all
root@bt:~# apt-get install synaptic
Choose this packages and install, after install reboot.
After Rebooting our system open terminal and start to install driver.
You can see all options for ndiswrapper and also how to install, anyway;
after that commant you'll get result (installing)
root@bt:~# ndiswrapper -i <inf folder and inf file> (ex: /root/desktop/xp32/bcmwlhigh32.inf)
we need to check what is our driver name;
my driver name is : bcmwlhigh5
root@bt:~# ndiswrapper -l
bcmwlhigh5 : driver installed
device (1EDA:2410) present
then we'll connect driver and device. but first we need to find driver's ID (PCIID or USBID)
if our device is pci, then write console;
if our device is usb, then write console;
when i do this i got result like ;
Bus 001 Device 007: ID 1eda:2410 AirTies Wireless Networks (This is my USB-Wifi device)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:0a15 Logitech, Inc.
Bus 003 Device 002: ID 1af3:0001
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 1eda:2410 AirTies Wireless Networks
Bus 001 Device 006: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I got the Device id : 1eda:2410
Then connect with driver and device id;
(as you see i got driver name and device id then write)
root@bt:~# ndiswrapper -a 1eda:2410 bcmwlhigh5
You will see a message like warning, ignore it. Yea, now it finished. Reboot the system.
Yes, driver is installed now, you can use it with "Wicd Network Manager"
Note : When try to connect first time, you can get error like "wrong password" just ignore it and try again.