Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Reaver question

Hybrid View

  1. #1
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    3

    Default Reaver question

    I'm running backtrack5 R3 and currently testing reaver 1.4
    Once it runs it get stuck at 90.90% first then 99.99%

    On question I have is:

    Does reaver need to get to 100% before finding anything or does 100% refer to any possible combination of 7 digits pin?

    The reason why I'm asking is because if it get stuck at 90.90 and pin e.g. 99985677 could I just run from 99985678 onwards?

    Appreciates
    rs232

  2. #2
    Just burned their ISO anashlali's Avatar
    Join Date
    Sep 2012
    Posts
    16

    Default Re: Reaver question

    Quote Originally Posted by rs232 View Post
    I'm running backtrack5 R3 and currently testing reaver 1.4
    Once it runs it get stuck at 90.90% first then 99.99%

    On question I have is:

    Does reaver need to get to 100% before finding anything or does 100% refer to any possible combination of 7 digits pin?

    The reason why I'm asking is because if it get stuck at 90.90 and pin e.g. 99985677 could I just run from 99985678 onwards?

    Appreciates
    rs232
    1. you can stop reaver any time with (( Ctrl+c )) and it w'll save your seassion automaticly, all you need is to run reaver again on the same Ap and it well start from last pin you got, make sure the AP still working!

  3. #3
    Just burned their ISO anashlali's Avatar
    Join Date
    Sep 2012
    Posts
    16

    Default Re: Reaver question

    reaver saves its session automaticly just stop it (( Ctrl+c )), all you need is run it again on the same AP and it well start from last pin.

  4. #4
    Member
    Join Date
    Sep 2010
    Location
    Eastern Island
    Posts
    96

    Default Re: Reaver question

    i encountered same as your example. possibly, if reaver doesn't continue at all, it means WPS is not enabled. IMHO

  5. #5
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    3

    Default Re: Reaver question

    Thanks both, that doesn't answer my question.

  6. #6
    Very good friend of the forum Gitsnik's Avatar
    Join Date
    Jan 2010
    Location
    The Crystal Wind
    Posts
    851

    Default Re: Reaver question

    Quote Originally Posted by rs232 View Post
    Thanks both, that doesn't answer my question.
    Issue... I think 84 on the reaver googlecode page describes almost exactly this. Go through the same diagnostic steps as there. Specifically, use the --pin switch with the valid pin to be sure that your version/ install is operating correctly.
    Still not underestimating the power...

    There is no such thing as bad information - There is truth in the data, so you sift it all, even the crap stuff.

  7. #7
    Just burned his ISO
    Join Date
    Sep 2012
    Posts
    11

    Default Re: Reaver question

    same here , got probleme with reaver ;
    sometime session are not saved ;

    reaver have to can resume manually and not with saved session ,
    im tryed attack mon my network ,
    session are not saved at 75%
    and i cant restart reaver at 70 / 72% .....
    saving system dont work well here..... (75% at 1 pin / 31 seconds = 4 day working ......)

    i dont know where report this to reaver owner .....

  8. #8
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    1

    Default Re: Reaver question

    mine seems to be running very slow i used

    reaver -i mon0 -b bssid -vv

    (3seconds/pin)

    been running 5 hours and only at 35% is there anyway to speed the process up?

  9. #9
    Just burned his ISO
    Join Date
    Sep 2012
    Posts
    11

    Default Re: Reaver question

    [+] 0.11% complete @ 2012-10-10 08:34:34 (13 seconds/pin)
    [+] 0.15% complete @ 2012-10-10 08:36:49 (19 seconds/pin)
    [+] 0.20% complete @ 2012-10-10 08:40:04 (25 seconds/pin)
    [+] 0.24% complete @ 2012-10-10 08:41:19 (24 seconds/pin)
    [+] 0.27% complete @ 2012-10-10 08:43:37 (25 seconds/pin)
    [+] 0.32% complete @ 2012-10-10 08:47:52 (30 seconds/pin)
    [+] 0.36% complete @ 2012-10-10 08:52:07 (33 seconds/pin)
    [+] 0.41% complete @ 2012-10-10 08:53:22 (30 seconds/pin)
    [+] 0.45% complete @ 2012-10-10 08:56:37 (31 seconds/pin)
    [+] 0.50% complete @ 2012-10-10 08:58:52 (31 seconds/pin)
    [+] 0.55% complete @ 2012-10-10 09:00:07 (29 seconds/pin)
    [+] 0.59% complete @ 2012-10-10 09:03:22 (30 seconds/pin)
    [+] 0.64% complete @ 2012-10-10 09:06:37 (31 seconds/pin)
    [+] 0.68% complete @ 2012-10-10 09:07:51 (30 seconds/pin)
    [+] 0.73% complete @ 2012-10-10 09:11:06 (30 seconds/pin)
    [+] 0.77% complete @ 2012-10-10 09:13:21 (30 seconds/pin)
    [+] 0.82% complete @ 2012-10-10 09:15:36 (30 seconds/pin)
    [+] 0.86% complete @ 2012-10-10 09:19:52 (31 seconds/pin)
    [+] 0.91% complete @ 2012-10-10 09:23:07 (31 seconds/pin)
    [+] 0.95% complete @ 2012-10-10 09:24:21 (30 seconds/pin)
    [+] 1.00% complete @ 2012-10-10 09:27:37 (31 seconds/pin)
    [+] 1.05% complete @ 2012-10-10 09:31:52 (32 seconds/pin)
    [+] 1.09% complete @ 2012-10-10 09:33:07 (31 seconds/pin)

    1% / hour

    i think box / plug limit speed login/rate ....
    i dont really think it's possible to speedup this method ...

    but i think reaver can be modded to attack more than 1 ap at time....

  10. #10
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    3

    Default Re: Reaver question

    Does reaver need to get to 100% before finding anything or does 100% refer to any possible combination of 7 digits pin?

Page 1 of 2 12 LastLast

Similar Threads

  1. Reaver problem/s
    By bellys in forum BackTrack 5 General Topics
    Replies: 1
    Last Post: 09-09-2012, 06:10 PM
  2. Help with Reaver
    By hongman in forum BackTrack 5 General Topics
    Replies: 18
    Last Post: 07-14-2012, 02:15 PM
  3. Problem in reaver
    By maxyoshida in forum BackTrack 5 General Topics
    Replies: 2
    Last Post: 04-24-2012, 01:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •