injection don't continu with RT73

[dzapffe19]

ifconfig rausb0 up
iwpriv rausb0 forceprism 1
iwpriv rausb0 rfmontx 1
iwconfig rausb0 mode monitor
airmon-ng start rausb0 8
airodump-ng rausb0

gives my router:
essid: router1
bssid: 00:40:2a........
pwr: 82
beacons: 22
# data: 9
#/s : 0
ch: 8
MB: 22
ENC: WEP
CIPHER: WEP
AUTH:


so then I:
airodump-ng -c 8 -w file --bssid MAC -h MYMAC rausb0
aireplay-ng -1 0 -a MAC -h MYMAC -e ESSID rausb0


Waiting for beacon frame (BSSID: .....)
sending authentication request
AP rejects open-system authentication
please specify PRGA-file (-y)


???????????
Driver is default RT73 driver (just rebooted, but i will try again with 1.1.0)
BT2 LIVE CD with airsuite 0.9.1

This is my router, 802.11 b dlink
my card is WUSB54GC linksys

[dzapffe19]

Then I unplugged my network card
put in my thumb drive
DRIVERS 1.1.0

make
make install
modprobe rt73

then plugged in USB network card
ifconfig rausb0 up
iwconfig rausb0 mode monitor channel 8 rate 1M

then the same thing: aireplay-ng -1 0 -e ... -a ... -h ... rausb0

AP rejects open-system authentication
please specify PGRA file
???



Then:
aireplay-ng -9 rausb0
injection is working!
found 1 ap

15/30 50%

[drgr33n]

Never come across this before?? But it dosn't sound like your USB dongle it sounds like your AP is rejecting the packets.

AP rejects open-system authentication

But like I said that ones above my head Sorry shamanvirtuel im a sh*&(& talking Mu&(*& Fuc*(&( lol

[shamanvirtuel]

macchange your card to an authorized mac , that means mac filtering is enabled...........

or it could be SKA authentification, and i posted a solution for ska authentification in wep spoonfeeder thread in programming corner......

[dzapffe19]

I changed my router to open authentication

I am now using rt73 drivers VERSION 2.0
aircrack suite 0.9.1

I can associate with the router
but when I

aireplay-ng -3 -b MAC -h MYMAC rausb0

You should also start airodump-ng to capture replies.
01:25:18 Packets per second adjusted to 375 355 packets...(28 pps)
01:25:20 Packets per second adjusted to 282
01:25:22 Packets per second adjusted to 212
01:25:24 Packets per second adjusted to 159
01:25:26 Packets per second adjusted to 120
01:25:28 Packets per second adjusted to 90
01:25:30 Packets per second adjusted to 68
01:25:32 Packets per second adjusted to 51
01:25:34 Packets per second adjusted to 39
01:25:36 Packets per second adjusted to 30
01:25:38 Packets per second adjusted to 23
01:25:40 Packets per second adjusted to 18
01:25:42 Packets per second adjusted to 14
01:25:44 Packets per second adjusted to 11
01:25:46 Packets per second adjusted to 9
01:25:48 Packets per second adjusted to 7
01:25:50 Packets per second adjusted to 6
01:25:52 Packets per second adjusted to 5
01:25:55 Packets per second adjusted to 4
01:25:57 Packets per second adjusted to 3
write failed: Resource temporarily unavailable


????? why

Note:

aireplay-ng -9 rausb0
injection is working!
16/30 53%

But see above, what does this mean??

write failed: Resource temporarily unavailable

[dzapffe19]

I hate to double post, but it seems I have tried:

BT2 unpatched
0.9.1
and 1.0 DEV

with every combo of drivers:

default
1.1
2.0

and nothing seems to work.
I am using RT73 linksys wusb54gc
Anyone got a good combination of aircrack suite release / drivers that work well for them on the RT73 cards?

[flanders]

@dzapffe19

Hi i am using the same linksys adapter

i was having the Authentication failed with v1.1 then i was getting the write failed msg with v2 the same as you, but i have found if i install v1.1 then v2 it works great! this is with aircrack v.9 and 1.0beta 1. both using livecd and a full hd install.

hope this helps

[dzapffe19]

What were the commands you used to install 1.1 then v2?
Did you remove 1.1 then install 2?

Normally I would:
ifconfig rausb0 down
rmmod rt73
make and make install
modprobe rt73
***plug in device***
ifconfig rausb0 up iwconfig rausb0 mode monitor

What steps should I modify if I am going to install 1.1, then 2.0?
Should I just repeat the procedure twice (first w/ 1.1 then w/ v2???)

[dzapffe19]

I installed 1.1 drivers, then 2.0 drivers
I could now associate with the AP !!!!!!!!!!!!!!!!

But when I try a -3 attack, I got 50 ARP requests really quickly, but now it slowed down to about 1 ARP / min.
Why is it going so slow?
Edit: IVS started at 8, will not increase
Injection possibly not working?
aircrack-ng -9 rausb0 yields that injection does work though...

Using RT73 2.0 drivers
airsuite 1.0 beta DEV

My router has one person connected, no traffic, pinging 192.168.0.2 (an invalid address) continuously
Card is RT73 linksus wusb54gc
rate 1M mode monitor channel 8
iwpriv forceprism 1

router is d link 614+ 802.11 b 64 bit WEP open auth

[Albert_Einstein]

I Have the same problem you dzapffe19 !! It would try to authenticate 6x, then would say nothing.
I don´t know what to do with this linksys card!!
May u help me ???

Here is what I did:

ifconfig rausb0 up
iwconfig rausb0 moe monitor
airmon-ng start rausb0
airodump-ng rausb0
airodump-ng -c 6 -w file --bssid MAC_ADDRESS rausb0
aireplay-ng -1 0 -a MAC_ADDRESS -h MY_MAC_ADDRESS -e THE_ESSID rausb0

Sending Authentication Request
Sending Authentication Request
Sending Authentication Request
Sending Authentication Request
Sending Authentication Request
Sending Authentication Request

.......then nothing........

It would try to authenticate 6x, then would say nothing.
No error, no confirmation, it would just hang...