Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: LinkSys WUSB54GC-problem

  1. #1
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    5

    Unhappy LinkSys WUSB54GC-problem

    Hello (first sorry for my english)
    I have a problem with my LinkSys WUSB54GC (shown as RT2500?):
    first my commands at the beginning:

    ifconfig rausb0 up
    iwpriv rausb0 forceprism 1
    iwprif rausb0 rfmontx 1
    iwconfig rausb0 rate 1M
    iwconfig rausb0 mode monitor
    airmon-ng start rausb0

    then I use airoscript (h!!p://trac.aircrack-ng.org/svn/branch/airoscript/)
    scan OK;select OK; attack:
    there are two variants of failture:

    if I use the BT2final build in driver:
    he says accociate request successfull
    authentification request successfull
    he repeat these lines often but after some time the :-) was shown (and then he repeat again the lines)
    but i have not 1 ARP packet capturet

    if i use the rt73-k2wrlz-1.1.0 driver (h!!p://homepages.tu-darmstadt.de/~p_larbig/wlan/):
    he say 5 times sending accociaten then he stop and nothing happen (0 ARP)

    i use aircrack-ng 1.0 dev 654 (if i use --test: after 0/30 [or something like this] he stops)

    some ideas? (sorry for my english again)

  2. #2
    Jenkem Addict imported_wyze's Avatar
    Join Date
    Jul 2007
    Posts
    1,543

    Default

    Quote Originally Posted by Patric View Post
    Hello (first sorry for my english)
    I have a problem with my LinkSys WUSB54GC (shown as RT2500?):
    first my commands at the beginning:

    ifconfig rausb0 up
    iwpriv rausb0 forceprism 1
    iwprif rausb0 rfmontx 1
    iwconfig rausb0 rate 1M
    iwconfig rausb0 mode monitor
    airmon-ng start rausb0

    then I use airoscript (h!!p://trac.aircrack-ng.org/svn/branch/airoscript/)
    scan OK;select OK; attack:
    there are two variants of failture:

    if I use the BT2final build in driver:
    he says accociate request successfull
    authentification request successfull
    he repeat these lines often but after some time the :-) was shown (and then he repeat again the lines)
    but i have not 1 ARP packet capturet

    if i use the rt73-k2wrlz-1.1.0 driver (h!!p://homepages.tu-darmstadt.de/~p_larbig/wlan/):
    he say 5 times sending accociaten then he stop and nothing happen (0 ARP)

    i use aircrack-ng 1.0 dev 654 (if i use --test: after 0/30 [or something like this] he stops)

    some ideas? (sorry for my english again)
    1) You need to do a search on this forum for the correct drivers to use (the CVS nightly of the rt73 worked for me)
    2) Make sure that you follow the directions in placing the bin file and ucode in the proper directories

    All of the info is here on the forum
    dd if=/dev/swc666 of=/dev/wyze

  3. #3
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    You might want to try the rt73-k2wrlz-2.0.0 driver.

    I have the same wireless card and using the 1.1.0 driver, I don't have any problems, so I can't offer much advice.

    Have a look at this thread: http://tinyshell.be/aircrackng/forum...?topic=1824.45. It may be of some help.

  4. #4
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    that sounds like mac filtering activated for this ap

    try to change your mac before you associate

    ..........
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

  5. #5
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    5

    Default

    Quote Originally Posted by shamanvirtuel View Post
    that sounds like mac filtering activated for this ap

    try to change your mac before you associate

    ..........
    Its my AP and there is no MAC Filter enabled

    with the 2.0.0 drivers the same problem (sending authentification... 5 times then nothing) couldt it be that i install the drivers false?
    i use:
    copy the file to root
    tar ......bz2
    cd rt73-2.0.0/Module
    make
    make install

    Which commands do you use shamanvirtuel to get your WUSB54GC working and which drivers? (How do you install?)

  6. #6
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    http://homepages.tu-darmstadt.de/~p_...-1.1.0.tar.bz2

    i use this one because 2.0.0 is based on an older driver(dec 06)

    ifconfig rausb0 down
    rmmod rt73
    make
    make install
    modprobe rt73
    ifconfig rausb0 up

    support wpa handshake capturing, ........all is out of the box........(only forceprism wich is disabled by default, because it may cause some pbs)

    i use this card for developing softs so....yes it works
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

  7. #7
    Just burned his ISO
    Join Date
    Aug 2007
    Posts
    5

    Default

    is there some way to check the following commands:

    iwpriv rausb0 forceprism 1
    iwprif rausb0 rfmontx 1

    i think my card doesnt enable these commands because the card doesnt send in monitor mode (or?)

  8. #8
    Jenkem Addict imported_wyze's Avatar
    Join Date
    Jul 2007
    Posts
    1,543

    Default

    If it helps, I made a shell script that you can use:

    #!/bin/sh
    modprobe rt73 #Use the appropriate driver here
    modprobe rausb0
    ifconfig rausb0 down
    macchanger --mac 00:11:22:33:44:55 rausb0 #Will simplify testing
    ifconfig rausb0 up
    iwconfig rausb0 mode Monitor
    iwconfig
    dd if=/dev/swc666 of=/dev/wyze

  9. #9
    Member
    Join Date
    Jun 2007
    Posts
    218

    Default

    You can check the iwpriv file from whichever driver you are using, but I don't think ASPj uses those any longer. At least, they are not used in v. 1.1.0

  10. #10
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    iwpriv rausb0 get_rfmontx

    will answer 1 if injection activated

    the forceprism is only for pwr output............
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •