Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: HackPack Tool : WARNING: untrusted versions of the following packages will be install

  1. #1
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default HackPack Tool : WARNING: untrusted versions of the following packages will be install

    Ok this is about HackPack v1.5. It can be found here:
    http://www.pclive-assistance.fr/shar...cks4b3r.tar.gz


    The install is quite simple.
    Unzip then cd to the folder in terminal.
    Then type chmod +x install
    and then ./install

    While installing, the script updates the tool and install various other libraries I suppose. While updating I am seeing various untrusted packages are about to be downloded which I cancelled..Please see below complete installation process and I highlighted the untrusted portion.

    Code:
    +===========================================================+
    |    You are installing HackPack, by Bl4ckS4b3r & Yookon    |
    +===========================================================+
    
                        _____________ 
                       |             |
                       |  HackPack   |
                       |    V 1.4    |
                       |_____________|
                       \              \____ 
                        \              \   l
                         \______________\  []
    
    
    
    This will auto install, when it is finished type sbrpwn to run.
    
    Please wait...
    
    
    
    
    
     System start/stop links for /etc/init.d/wicd already exist.
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Suggested packages:
      cmatrix-xfont
    The following NEW packages will be installed:
      cmatrix
    0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
    Need to get 17.6kB of archives.
    After this operation, 106kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      cmatrix
    Install these packages without verification [y/N]? y
    Get:1 http://64.repository.backtrack-linux.org/ revolution/main cmatrix 1.2a-4 [17.6kB]
    Fetched 17.6kB in 1s (12.6kB/s)
    Selecting previously deselected package cmatrix.
    (Reading database ... 324864 files and directories currently installed.)
    ----snip----
    After this operation, 0B of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      ettercap
    Install these packages without verification [y/N]? y
    Get:1 http://64.repository.backtrack-linux.org/ revolution/testing ettercap 7.4.1-bt0 [436kB]
    Fetched 436kB in 2s (146kB/s)    
    Selecting previously deselected package ettercap.
    (Reading database ... 324874 files and directories currently installed.)
    Unpacking ettercap (from .../ettercap_7.4.1-bt0_amd64.deb) ...
    -----snip-----
    Fetched 112kB in 1s (60.8kB/s)              
    Selecting previously deselected package gtk-recordmydesktop.
    (Reading database ... 324976 files and directories currently installed.)
    Unpacking gtk-recordmydesktop (from .../gtk-recordmydesktop_0.3.8-1ubuntu1_all.deb) ...
    After this operation, 3,645kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      mencoder
    Install these packages without verification [y/N]? y
    Get:1 http://packages.medibuntu.org/ lucid/non-free mencoder 2:1.0~rc3+svn20090426-1ubuntu16.1+medibuntu1 [1,571kB]
    Fetched 1,571kB in 9s (166kB/s)                                                
    -----snip--------
    copying build/lib.linux-x86_64-2.6/sslstrip/StrippingProxy.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnectionFactory.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/SSLServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/DnsCache.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ClientRequest.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/__init__.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    running install_scripts
    copying build/scripts-2.6/sslstrip -> /usr/local/bin
    changing mode of /usr/local/bin/sslstrip to 755
    running install_data
    copying README -> /usr/local/share/sslstrip
    copying COPYING -> /usr/local/share/sslstrip
    copying lock.ico -> /usr/local/share/sslstrip
    running install_egg_info
    Removing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
    Writing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
    Cleaning up...
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Reading extended state information      
    Initializing package states... Done
    Writing extended state information... Done
    The following NEW packages will be installed:
      libgdiplus{a} libgluezilla{a} libmono-accessibility1.0-cil{a} 
      libmono-accessibility2.0-cil{a} libmono-bytefx0.7.6.1-cil{a} 
      libmono-bytefx0.7.6.2-cil{a} libmono-c5-1.1-cil{a} 
      libmono-cairo1.0-cil{a} libmono-cecil-private-cil{a} libmono-cil-dev{a} 
      libmono-corlib1.0-cil{a} libmono-cscompmgd7.0-cil{a} 
      libmono-cscompmgd8.0-cil{a} libmono-data-tds1.0-cil{a} 
      libmono-data-tds2.0-cil{a} libmono-data1.0-cil{a} libmono-data2.0-cil{a} 
      libmono-db2-1.0-cil{a} libmono-debugger-soft0.0-cil{a} libmono-dev{a} 
      libmono-getoptions1.0-cil{a} libmono-getoptions2.0-cil{a} 
      libmono-i18n-west1.0-cil{a} libmono-i18n1.0-cil{a} libmono-i18n2.0-cil{a} 
      libmono-ldap1.0-cil{a} libmono-ldap2.0-cil{a} 
      libmono-management2.0-cil{a} libmono-messaging-rabbitmq2.0-cil{a} 
      libmono-messaging2.0-cil{a} libmono-microsoft-build2.0-cil{a} 
      libmono-microsoft7.0-cil{a} libmono-microsoft8.0-cil{a} 
      libmono-npgsql1.0-cil{a} libmono-npgsql2.0-cil{a} 
      libmono-oracle1.0-cil{a} libmono-oracle2.0-cil{a} libmono-peapi1.0-cil{a} 
      libmono-peapi2.0-cil{a} libmono-posix1.0-cil{a} 
      libmono-rabbitmq2.0-cil{a} libmono-relaxng1.0-cil{a} 
      libmono-relaxng2.0-cil{a} libmono-security1.0-cil{a} 
      libmono-sharpzip0.6-cil{a} libmono-sharpzip0.84-cil{a} 
      libmono-sharpzip2.6-cil{a} libmono-simd2.0-cil{a} 
      libmono-sqlite1.0-cil{a} libmono-sqlite2.0-cil{a} 
      libmono-system-data1.0-cil{a} libmono-system-data2.0-cil{a} 
      libmono-system-ldap1.0-cil{a} libmono-system-ldap2.0-cil{a} 
      libmono-system-messaging1.0-cil{a} libmono-system-messaging2.0-cil{a} 
      libmono-system-runtime1.0-cil{a} libmono-system-runtime2.0-cil{a} 
      libmono-system-web-mvc1.0-cil{a} libmono-system-web-mvc2.0-cil{a} 
      libmono-system-web1.0-cil{a} libmono-system-web2.0-cil{a} 
      libmono-system1.0-cil{a} libmono-tasklets2.0-cil{a} libmono-wcf3.0-cil{a} 
      libmono-webbrowser0.5-cil{a} libmono-windowsbase3.0-cil{a} 
      libmono-winforms1.0-cil{a} libmono-winforms2.0-cil{a} libmono0{a} 
      libmono1.0-cil{a} libmono2.0-cil{a} libnunit-cil-dev{a} 
      libnunit2.4-cil{a} libsqlite0{a} mono-2.0-devel{a} mono-csharp-shell{a} 
      mono-devel{a} mono-gmcs{a} monodevelop monodoc-base{a} monodoc-manual{a} 
    0 packages upgraded, 82 newly installed, 0 to remove and 5 not upgraded.
    Need to get 31.8MB of archives. After unpacking 90.2MB will be used.
    Do you want to continue? [Y/n/?] Y
    WARNING: untrusted versions of the following packages will be installed!
    
    Untrusted packages could compromise your system's security.
    You should only proceed with the installation if you are certain that
    this is what you want to do.
    
      libgluezilla libsqlite0 libgdiplus 
    
    Do you want to ignore this warning and proceed anyway?
    To continue, enter "Yes"; to abort, enter "No": No
    Abort.
    Y
    y
    --2012-06-22 00:38:36--  https://raw.github.com/nicolargo/loicinstaller/master/loic.sh
    Resolving raw.github.com... 207.97.227.243
    Connecting to raw.github.com|207.97.227.243|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 2331 (2.3K) [text/plain]
    Saving to: `loic.sh'
    
    100%[==============================================================================================================>] 2,331       --.-K/s   in 0s      
    
    2012-06-22 00:38:38 (632 MB/s) - `loic.sh' saved [2331/2331]
    
    /usr/bin/git
    Initialized empty Git repository in /sbin/loic/LOIC/.git/
    remote: Counting objects: 385, done.
    remote: Compressing objects: 100% (194/194), done.
    remote: Total 385 (delta 225), reused 344 (delta 186)
    Receiving objects: 100% (385/385), 622.26 KiB | 180 KiB/s, done.
    Resolving deltas: 100% (225/225), done.
    ./loic.sh: line 75: mdtool: command not found
    /usr/bin/git
    Current branch master is up to date.
    /usr/bin/git
    ./loic.sh: line 75: mdtool: command not found
    Y
    y
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Package monodoc-base is not installed, so not removed
    0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
    Y
    y
    
    You can now open a shell and type: sbrpwn
    and it will do this...
    ./install: line 178: sbrpwn: command not found
    You have new mail in /var/mail/root
    root@bt:~/scripts/HackPack# sbrpwn
    sbrpwn: command not found
    root@bt:~/scripts/HackPack#
    Has anyone tried installing this tool.. Should I go ahead with the untrusted packages? Your input please.
    Thanks
    Last edited by bolexxx; 06-21-2012 at 09:52 AM.

  2. #2
    Moderated Member
    Join Date
    Oct 2011
    Posts
    44

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by hannah View Post
    Ok this is about HackPack v1.5. It can be found here:
    http://www.pclive-assistance.fr/shar...cks4b3r.tar.gz


    The install is quite simple.
    Unzip then cd to the folder in terminal.
    Then type chmod +x install
    and then ./install

    While installing, the script updates the tool and install various other libraries I suppose. While updating I am seeing various untrusted packages are about to be downloded which I cancelled..Please see below complete installation process and I highlighted the untrusted portion.

    Code:
    +===========================================================+
    |    You are installing HackPack, by Bl4ckS4b3r & Yookon    |
    +===========================================================+
    
                        _____________ 
                       |             |
                       |  HackPack   |
                       |    V 1.4    |
                       |_____________|
                       \              \____ 
                        \              \   l
                         \______________\  []
    
    
    
    This will auto install, when it is finished type sbrpwn to run.
    
    Please wait...
    
    
    
    
    
     System start/stop links for /etc/init.d/wicd already exist.
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Suggested packages:
      cmatrix-xfont
    The following NEW packages will be installed:
      cmatrix
    0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
    Need to get 17.6kB of archives.
    After this operation, 106kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      cmatrix
    Install these packages without verification [y/N]? y
    Get:1 http://64.repository.backtrack-linux.org/ revolution/main cmatrix 1.2a-4 [17.6kB]
    Fetched 17.6kB in 1s (12.6kB/s)
    Selecting previously deselected package cmatrix.
    (Reading database ... 324864 files and directories currently installed.)
    ----snip----
    After this operation, 0B of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      ettercap
    Install these packages without verification [y/N]? y
    Get:1 http://64.repository.backtrack-linux.org/ revolution/testing ettercap 7.4.1-bt0 [436kB]
    Fetched 436kB in 2s (146kB/s)    
    Selecting previously deselected package ettercap.
    (Reading database ... 324874 files and directories currently installed.)
    Unpacking ettercap (from .../ettercap_7.4.1-bt0_amd64.deb) ...
    -----snip-----
    Fetched 112kB in 1s (60.8kB/s)              
    Selecting previously deselected package gtk-recordmydesktop.
    (Reading database ... 324976 files and directories currently installed.)
    Unpacking gtk-recordmydesktop (from .../gtk-recordmydesktop_0.3.8-1ubuntu1_all.deb) ...
    After this operation, 3,645kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
      mencoder
    Install these packages without verification [y/N]? y
    Get:1 http://packages.medibuntu.org/ lucid/non-free mencoder 2:1.0~rc3+svn20090426-1ubuntu16.1+medibuntu1 [1,571kB]
    Fetched 1,571kB in 9s (166kB/s)                                                
    -----snip--------
    copying build/lib.linux-x86_64-2.6/sslstrip/StrippingProxy.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnectionFactory.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/SSLServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/DnsCache.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/ClientRequest.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    copying build/lib.linux-x86_64-2.6/sslstrip/__init__.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
    running install_scripts
    copying build/scripts-2.6/sslstrip -> /usr/local/bin
    changing mode of /usr/local/bin/sslstrip to 755
    running install_data
    copying README -> /usr/local/share/sslstrip
    copying COPYING -> /usr/local/share/sslstrip
    copying lock.ico -> /usr/local/share/sslstrip
    running install_egg_info
    Removing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
    Writing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
    Cleaning up...
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Reading extended state information      
    Initializing package states... Done
    Writing extended state information... Done
    The following NEW packages will be installed:
      libgdiplus{a} libgluezilla{a} libmono-accessibility1.0-cil{a} 
      libmono-accessibility2.0-cil{a} libmono-bytefx0.7.6.1-cil{a} 
      libmono-bytefx0.7.6.2-cil{a} libmono-c5-1.1-cil{a} 
      libmono-cairo1.0-cil{a} libmono-cecil-private-cil{a} libmono-cil-dev{a} 
      libmono-corlib1.0-cil{a} libmono-cscompmgd7.0-cil{a} 
      libmono-cscompmgd8.0-cil{a} libmono-data-tds1.0-cil{a} 
      libmono-data-tds2.0-cil{a} libmono-data1.0-cil{a} libmono-data2.0-cil{a} 
      libmono-db2-1.0-cil{a} libmono-debugger-soft0.0-cil{a} libmono-dev{a} 
      libmono-getoptions1.0-cil{a} libmono-getoptions2.0-cil{a} 
      libmono-i18n-west1.0-cil{a} libmono-i18n1.0-cil{a} libmono-i18n2.0-cil{a} 
      libmono-ldap1.0-cil{a} libmono-ldap2.0-cil{a} 
      libmono-management2.0-cil{a} libmono-messaging-rabbitmq2.0-cil{a} 
      libmono-messaging2.0-cil{a} libmono-microsoft-build2.0-cil{a} 
      libmono-microsoft7.0-cil{a} libmono-microsoft8.0-cil{a} 
      libmono-npgsql1.0-cil{a} libmono-npgsql2.0-cil{a} 
      libmono-oracle1.0-cil{a} libmono-oracle2.0-cil{a} libmono-peapi1.0-cil{a} 
      libmono-peapi2.0-cil{a} libmono-posix1.0-cil{a} 
      libmono-rabbitmq2.0-cil{a} libmono-relaxng1.0-cil{a} 
      libmono-relaxng2.0-cil{a} libmono-security1.0-cil{a} 
      libmono-sharpzip0.6-cil{a} libmono-sharpzip0.84-cil{a} 
      libmono-sharpzip2.6-cil{a} libmono-simd2.0-cil{a} 
      libmono-sqlite1.0-cil{a} libmono-sqlite2.0-cil{a} 
      libmono-system-data1.0-cil{a} libmono-system-data2.0-cil{a} 
      libmono-system-ldap1.0-cil{a} libmono-system-ldap2.0-cil{a} 
      libmono-system-messaging1.0-cil{a} libmono-system-messaging2.0-cil{a} 
      libmono-system-runtime1.0-cil{a} libmono-system-runtime2.0-cil{a} 
      libmono-system-web-mvc1.0-cil{a} libmono-system-web-mvc2.0-cil{a} 
      libmono-system-web1.0-cil{a} libmono-system-web2.0-cil{a} 
      libmono-system1.0-cil{a} libmono-tasklets2.0-cil{a} libmono-wcf3.0-cil{a} 
      libmono-webbrowser0.5-cil{a} libmono-windowsbase3.0-cil{a} 
      libmono-winforms1.0-cil{a} libmono-winforms2.0-cil{a} libmono0{a} 
      libmono1.0-cil{a} libmono2.0-cil{a} libnunit-cil-dev{a} 
      libnunit2.4-cil{a} libsqlite0{a} mono-2.0-devel{a} mono-csharp-shell{a} 
      mono-devel{a} mono-gmcs{a} monodevelop monodoc-base{a} monodoc-manual{a} 
    0 packages upgraded, 82 newly installed, 0 to remove and 5 not upgraded.
    Need to get 31.8MB of archives. After unpacking 90.2MB will be used.
    Do you want to continue? [Y/n/?] Y
    WARNING: untrusted versions of the following packages will be installed!
    
    Untrusted packages could compromise your system's security.
    You should only proceed with the installation if you are certain that
    this is what you want to do.
    
      libgluezilla libsqlite0 libgdiplus 
    
    Do you want to ignore this warning and proceed anyway?
    To continue, enter "Yes"; to abort, enter "No": No
    Abort.
    Y
    y
    --2012-06-22 00:38:36--  https://raw.github.com/nicolargo/loicinstaller/master/loic.sh
    Resolving raw.github.com... 207.97.227.243
    Connecting to raw.github.com|207.97.227.243|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 2331 (2.3K) [text/plain]
    Saving to: `loic.sh'
    
    100%[==============================================================================================================>] 2,331       --.-K/s   in 0s      
    
    2012-06-22 00:38:38 (632 MB/s) - `loic.sh' saved [2331/2331]
    
    /usr/bin/git
    Initialized empty Git repository in /sbin/loic/LOIC/.git/
    remote: Counting objects: 385, done.
    remote: Compressing objects: 100% (194/194), done.
    remote: Total 385 (delta 225), reused 344 (delta 186)
    Receiving objects: 100% (385/385), 622.26 KiB | 180 KiB/s, done.
    Resolving deltas: 100% (225/225), done.
    ./loic.sh: line 75: mdtool: command not found
    /usr/bin/git
    Current branch master is up to date.
    /usr/bin/git
    ./loic.sh: line 75: mdtool: command not found
    Y
    y
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Package monodoc-base is not installed, so not removed
    0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
    Y
    y
    
    You can now open a shell and type: sbrpwn
    and it will do this...
    ./install: line 178: sbrpwn: command not found
    You have new mail in /var/mail/root
    root@bt:~/scripts/HackPack# sbrpwn
    sbrpwn: command not found
    root@bt:~/scripts/HackPack#
    Has anyone tried installing this tool.. Should I go ahead with the untrusted packages? Your input please.
    Thanks

    You installed it incorrectly. If you follow the directions as I have VERY specifically typed out its...
    Move ALL files to desktop for your very first install... then cd Desktop, then chmod +x install, then ./install
    When you do it like that it will find sbrpwn.
    After your initial update you can just use the update feature, and to answer your question, there is nothing mallicious, or harmful, about anything in HackPack. Thats not my M.O.

  3. #3
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    I am not trying to point finger at anyone here just seeking some answers really. As a security conscious person (which we all are in this forum), I had to ask it.
    So can you please explain what is the difference between moving all the files in Desktop and then cd Desktop vis a vis just unzipping and then cd to that unzipped folder please.

    Many thanks

  4. #4
    Moderated Member
    Join Date
    Oct 2011
    Posts
    44

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by hannah View Post
    I am not trying to point finger at anyone here just seeking some answers really. As a security conscious person (which we all are in this forum), I had to ask it.
    So can you please explain what is the difference between moving all the files in Desktop and then cd Desktop vis a vis just unzipping and then cd to that unzipped folder please.

    Many thanks
    Yeah not a problem, the reason is painfully simple. Its just how I setup the script. I could modify it to cd to Desktop/Bl4ckS4b3r I suppose, but then again its just not how I originally wrote it. I understand the skepticism, but trust me--this is a toolkit I planned on just keeping for myself, and then later was asked by many to release. There is nothing that will harm your computer, or open it up for others, unless the programs themselves (LOIC, Ettercap, NMH, ect) do. My goal was to have the developers include it in BT6. If you have any other questions feel free to ask.

  5. #5
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by Bl4cks4b3r View Post
    Yeah not a problem, the reason is painfully simple. Its just how I setup the script. I could modify it to cd to Desktop/Bl4ckS4b3r I suppose, but then again its just not how I originally wrote it. I understand the skepticism, but trust me--this is a toolkit I planned on just keeping for myself, and then later was asked by many to release. There is nothing that will harm your computer, or open it up for others, unless the programs themselves (LOIC, Ettercap, NMH, ect) do. My goal was to have the developers include it in BT6. If you have any other questions feel free to ask.
    Ok thanks really for prompt response and thanks for sharing the script. I do have questions and will take this opportunity to ask. Now the question is if I just unzipped all the files in desktop and then chmod +x install file and then run ./install will I still get all the warning for untrusted packages being installed. And if the asnwer is 'yes' then why please? I hope if you do not mind me asking this.
    Last edited by hannah; 06-25-2012 at 06:06 PM.

  6. #6
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

    I do like to use this tool but do not want to get my system open.

    Many thanks

  7. #7
    Moderated Member
    Join Date
    Oct 2011
    Posts
    44

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by hannah View Post
    Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

    I do like to use this tool but do not want to get my system open.

    Many thanks
    Its very simple, the toolkit is not "unsecure" in any way shape of form. How you decide to use backtrack might make you unsecure.

  8. #8
    Just burned his ISO
    Join Date
    Jul 2012
    Posts
    1

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by hannah View Post
    Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

    I do like to use this tool but do not want to get my system open.

    Many thanks
    Here i am , i used this tool since it was v1.2 its very promising and its Very good , simply it makes Life Easier and it does everything you can imagine including Generator for Wifi-cracking it Cracks both WPA and WEP easily By just few steps and it has Lots of stuff that are not available in any other tool..

    Greetings,
    Hanga

  9. #9
    Just burned his ISO
    Join Date
    Jul 2012
    Posts
    1

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Quote Originally Posted by hannah View Post
    Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

    I do like to use this tool but do not want to get my system open.

    Many thanks
    Good to see it finally getting out there.

    I have not once had any problems with hackpack. Well, some problems but that was just simple bugs from the original release.

    I don't know why it matters how you extract it, or where you extract it too, but if i were to take an educated guess, I would think it's because, that's how the creator made it.

    and as for the messages, i'd imagine that there's some sort of process that all programs have to go through to be determined safe, and since this is still a new script, then it hasn't gone through all the channels it takes to be labeled safe.

  10. #10
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

    Ok it's quite obvious to me that it's a great tool to use and I personally like to use it as well. Many thanks to Bl4cks4b3r for creating this tool.

    Let me just to go back to what I initially asked: Please look at post #1.

    All what I am saying when I was installing this HackPack tool I have see in my terminal this message"

    Code:
    WARNING: untrusted versions of the following packages will be installed!
    I am just seeking an answer for this message. Why this tool Hackpack needs to install untrusted version of some packages?

    Please note that this is not a dig any anyone really and I am thankful that Bl4cks4b3r took time to create this tool.

    Cheers and have a good weekend.
    Last edited by hannah; 07-17-2012 at 12:07 AM.

Page 1 of 2 12 LastLast

Similar Threads

  1. k3b install ,E: Broken packages
    By loop4me in forum OLD BackTrack 4 Software Related Issues
    Replies: 2
    Last Post: 07-15-2009, 12:25 PM
  2. 50% done - Compiling .deb packages - From BackTrack 3 tool list - Anyone want them?
    By Panarchy in forum OLD Latest Public Release - BackTrack4 Beta
    Replies: 17
    Last Post: 02-23-2009, 03:22 PM
  3. can not install packages....
    By soviet in forum OLD Newbie Area
    Replies: 0
    Last Post: 09-24-2008, 09:42 AM
  4. some request (BT packages LIST and BT packages archive)
    By 3segfault in forum OLD Newbie Area
    Replies: 2
    Last Post: 05-04-2008, 09:43 AM
  5. Hot to install newest versions of apps into BT2 image
    By AmphybiouS in forum OLD Newbie Area
    Replies: 9
    Last Post: 07-06-2007, 06:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •