HackPack Tool : WARNING: untrusted versions of the following packages will be install

**hannah** · 06-21-2012, 08:03 AM

Ok this is about HackPack v1.5. It can be found here:
http://www.pclive-assistance.fr/shar...cks4b3r.tar.gz

The install is quite simple.
Unzip then cd to the folder in terminal.
Then type chmod +x install
and then ./install

While installing, the script updates the tool and install various other libraries I suppose. While updating I am seeing various untrusted packages are about to be downloded which I cancelled..Please see below complete installation process and I highlighted the untrusted portion.

Code:

+===========================================================+
|    You are installing HackPack, by Bl4ckS4b3r & Yookon    |
+===========================================================+

                    _____________ 
                   |             |
                   |  HackPack   |
                   |    V 1.4    |
                   |_____________|
                   \              \____ 
                    \              \   l
                     \______________\  []



This will auto install, when it is finished type sbrpwn to run.

Please wait...





 System start/stop links for /etc/init.d/wicd already exist.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  cmatrix-xfont
The following NEW packages will be installed:
  cmatrix
0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
Need to get 17.6kB of archives.
After this operation, 106kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  cmatrix
Install these packages without verification [y/N]? y
Get:1 http://64.repository.backtrack-linux.org/ revolution/main cmatrix 1.2a-4 [17.6kB]
Fetched 17.6kB in 1s (12.6kB/s)
Selecting previously deselected package cmatrix.
(Reading database ... 324864 files and directories currently installed.)
----snip----
After this operation, 0B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  ettercap
Install these packages without verification [y/N]? y
Get:1 http://64.repository.backtrack-linux.org/ revolution/testing ettercap 7.4.1-bt0 [436kB]
Fetched 436kB in 2s (146kB/s)    
Selecting previously deselected package ettercap.
(Reading database ... 324874 files and directories currently installed.)
Unpacking ettercap (from .../ettercap_7.4.1-bt0_amd64.deb) ...
-----snip-----
Fetched 112kB in 1s (60.8kB/s)              
Selecting previously deselected package gtk-recordmydesktop.
(Reading database ... 324976 files and directories currently installed.)
Unpacking gtk-recordmydesktop (from .../gtk-recordmydesktop_0.3.8-1ubuntu1_all.deb) ...
After this operation, 3,645kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  mencoder
Install these packages without verification [y/N]? y
Get:1 http://packages.medibuntu.org/ lucid/non-free mencoder 2:1.0~rc3+svn20090426-1ubuntu16.1+medibuntu1 [1,571kB]
Fetched 1,571kB in 9s (166kB/s)                                                
-----snip--------
copying build/lib.linux-x86_64-2.6/sslstrip/StrippingProxy.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnectionFactory.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/SSLServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/DnsCache.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ClientRequest.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/__init__.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
running install_scripts
copying build/scripts-2.6/sslstrip -> /usr/local/bin
changing mode of /usr/local/bin/sslstrip to 755
running install_data
copying README -> /usr/local/share/sslstrip
copying COPYING -> /usr/local/share/sslstrip
copying lock.ico -> /usr/local/share/sslstrip
running install_egg_info
Removing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
Writing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
Cleaning up...
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
  libgdiplus{a} libgluezilla{a} libmono-accessibility1.0-cil{a} 
  libmono-accessibility2.0-cil{a} libmono-bytefx0.7.6.1-cil{a} 
  libmono-bytefx0.7.6.2-cil{a} libmono-c5-1.1-cil{a} 
  libmono-cairo1.0-cil{a} libmono-cecil-private-cil{a} libmono-cil-dev{a} 
  libmono-corlib1.0-cil{a} libmono-cscompmgd7.0-cil{a} 
  libmono-cscompmgd8.0-cil{a} libmono-data-tds1.0-cil{a} 
  libmono-data-tds2.0-cil{a} libmono-data1.0-cil{a} libmono-data2.0-cil{a} 
  libmono-db2-1.0-cil{a} libmono-debugger-soft0.0-cil{a} libmono-dev{a} 
  libmono-getoptions1.0-cil{a} libmono-getoptions2.0-cil{a} 
  libmono-i18n-west1.0-cil{a} libmono-i18n1.0-cil{a} libmono-i18n2.0-cil{a} 
  libmono-ldap1.0-cil{a} libmono-ldap2.0-cil{a} 
  libmono-management2.0-cil{a} libmono-messaging-rabbitmq2.0-cil{a} 
  libmono-messaging2.0-cil{a} libmono-microsoft-build2.0-cil{a} 
  libmono-microsoft7.0-cil{a} libmono-microsoft8.0-cil{a} 
  libmono-npgsql1.0-cil{a} libmono-npgsql2.0-cil{a} 
  libmono-oracle1.0-cil{a} libmono-oracle2.0-cil{a} libmono-peapi1.0-cil{a} 
  libmono-peapi2.0-cil{a} libmono-posix1.0-cil{a} 
  libmono-rabbitmq2.0-cil{a} libmono-relaxng1.0-cil{a} 
  libmono-relaxng2.0-cil{a} libmono-security1.0-cil{a} 
  libmono-sharpzip0.6-cil{a} libmono-sharpzip0.84-cil{a} 
  libmono-sharpzip2.6-cil{a} libmono-simd2.0-cil{a} 
  libmono-sqlite1.0-cil{a} libmono-sqlite2.0-cil{a} 
  libmono-system-data1.0-cil{a} libmono-system-data2.0-cil{a} 
  libmono-system-ldap1.0-cil{a} libmono-system-ldap2.0-cil{a} 
  libmono-system-messaging1.0-cil{a} libmono-system-messaging2.0-cil{a} 
  libmono-system-runtime1.0-cil{a} libmono-system-runtime2.0-cil{a} 
  libmono-system-web-mvc1.0-cil{a} libmono-system-web-mvc2.0-cil{a} 
  libmono-system-web1.0-cil{a} libmono-system-web2.0-cil{a} 
  libmono-system1.0-cil{a} libmono-tasklets2.0-cil{a} libmono-wcf3.0-cil{a} 
  libmono-webbrowser0.5-cil{a} libmono-windowsbase3.0-cil{a} 
  libmono-winforms1.0-cil{a} libmono-winforms2.0-cil{a} libmono0{a} 
  libmono1.0-cil{a} libmono2.0-cil{a} libnunit-cil-dev{a} 
  libnunit2.4-cil{a} libsqlite0{a} mono-2.0-devel{a} mono-csharp-shell{a} 
  mono-devel{a} mono-gmcs{a} monodevelop monodoc-base{a} monodoc-manual{a} 
0 packages upgraded, 82 newly installed, 0 to remove and 5 not upgraded.
Need to get 31.8MB of archives. After unpacking 90.2MB will be used.
Do you want to continue? [Y/n/?] Y
WARNING: untrusted versions of the following packages will be installed!

Untrusted packages could compromise your system's security.
You should only proceed with the installation if you are certain that
this is what you want to do.

  libgluezilla libsqlite0 libgdiplus 

Do you want to ignore this warning and proceed anyway?
To continue, enter "Yes"; to abort, enter "No": No
Abort.
Y
y
--2012-06-22 00:38:36--  https://raw.github.com/nicolargo/loicinstaller/master/loic.sh
Resolving raw.github.com... 207.97.227.243
Connecting to raw.github.com|207.97.227.243|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2331 (2.3K) [text/plain]
Saving to: `loic.sh'

100%[==============================================================================================================>] 2,331       --.-K/s   in 0s      

2012-06-22 00:38:38 (632 MB/s) - `loic.sh' saved [2331/2331]

/usr/bin/git
Initialized empty Git repository in /sbin/loic/LOIC/.git/
remote: Counting objects: 385, done.
remote: Compressing objects: 100% (194/194), done.
remote: Total 385 (delta 225), reused 344 (delta 186)
Receiving objects: 100% (385/385), 622.26 KiB | 180 KiB/s, done.
Resolving deltas: 100% (225/225), done.
./loic.sh: line 75: mdtool: command not found
/usr/bin/git
Current branch master is up to date.
/usr/bin/git
./loic.sh: line 75: mdtool: command not found
Y
y
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package monodoc-base is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Y
y

You can now open a shell and type: sbrpwn
and it will do this...
./install: line 178: sbrpwn: command not found
You have new mail in /var/mail/root
root@bt:~/scripts/HackPack# sbrpwn
sbrpwn: command not found
root@bt:~/scripts/HackPack#

Has anyone tried installing this tool.. Should I go ahead with the untrusted packages? Your input please.
Thanks

**Bl4cks4b3r** · 06-22-2012, 12:24 AM

Originally Posted by hannah

Ok this is about HackPack v1.5. It can be found here:
http://www.pclive-assistance.fr/shar...cks4b3r.tar.gz

The install is quite simple.
Unzip then cd to the folder in terminal.
Then type chmod +x install
and then ./install

While installing, the script updates the tool and install various other libraries I suppose. While updating I am seeing various untrusted packages are about to be downloded which I cancelled..Please see below complete installation process and I highlighted the untrusted portion.

Code:

+===========================================================+
|    You are installing HackPack, by Bl4ckS4b3r & Yookon    |
+===========================================================+

                    _____________ 
                   |             |
                   |  HackPack   |
                   |    V 1.4    |
                   |_____________|
                   \              \____ 
                    \              \   l
                     \______________\  []



This will auto install, when it is finished type sbrpwn to run.

Please wait...





 System start/stop links for /etc/init.d/wicd already exist.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  cmatrix-xfont
The following NEW packages will be installed:
  cmatrix
0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
Need to get 17.6kB of archives.
After this operation, 106kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  cmatrix
Install these packages without verification [y/N]? y
Get:1 http://64.repository.backtrack-linux.org/ revolution/main cmatrix 1.2a-4 [17.6kB]
Fetched 17.6kB in 1s (12.6kB/s)
Selecting previously deselected package cmatrix.
(Reading database ... 324864 files and directories currently installed.)
----snip----
After this operation, 0B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  ettercap
Install these packages without verification [y/N]? y
Get:1 http://64.repository.backtrack-linux.org/ revolution/testing ettercap 7.4.1-bt0 [436kB]
Fetched 436kB in 2s (146kB/s)    
Selecting previously deselected package ettercap.
(Reading database ... 324874 files and directories currently installed.)
Unpacking ettercap (from .../ettercap_7.4.1-bt0_amd64.deb) ...
-----snip-----
Fetched 112kB in 1s (60.8kB/s)              
Selecting previously deselected package gtk-recordmydesktop.
(Reading database ... 324976 files and directories currently installed.)
Unpacking gtk-recordmydesktop (from .../gtk-recordmydesktop_0.3.8-1ubuntu1_all.deb) ...
After this operation, 3,645kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  mencoder
Install these packages without verification [y/N]? y
Get:1 http://packages.medibuntu.org/ lucid/non-free mencoder 2:1.0~rc3+svn20090426-1ubuntu16.1+medibuntu1 [1,571kB]
Fetched 1,571kB in 9s (166kB/s)                                                
-----snip--------
copying build/lib.linux-x86_64-2.6/sslstrip/StrippingProxy.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnectionFactory.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/SSLServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/DnsCache.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ServerConnection.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/ClientRequest.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
copying build/lib.linux-x86_64-2.6/sslstrip/__init__.py -> /usr/local/lib/python2.6/dist-packages/sslstrip
running install_scripts
copying build/scripts-2.6/sslstrip -> /usr/local/bin
changing mode of /usr/local/bin/sslstrip to 755
running install_data
copying README -> /usr/local/share/sslstrip
copying COPYING -> /usr/local/share/sslstrip
copying lock.ico -> /usr/local/share/sslstrip
running install_egg_info
Removing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
Writing /usr/local/lib/python2.6/dist-packages/sslstrip-0.9.egg-info
Cleaning up...
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
  libgdiplus{a} libgluezilla{a} libmono-accessibility1.0-cil{a} 
  libmono-accessibility2.0-cil{a} libmono-bytefx0.7.6.1-cil{a} 
  libmono-bytefx0.7.6.2-cil{a} libmono-c5-1.1-cil{a} 
  libmono-cairo1.0-cil{a} libmono-cecil-private-cil{a} libmono-cil-dev{a} 
  libmono-corlib1.0-cil{a} libmono-cscompmgd7.0-cil{a} 
  libmono-cscompmgd8.0-cil{a} libmono-data-tds1.0-cil{a} 
  libmono-data-tds2.0-cil{a} libmono-data1.0-cil{a} libmono-data2.0-cil{a} 
  libmono-db2-1.0-cil{a} libmono-debugger-soft0.0-cil{a} libmono-dev{a} 
  libmono-getoptions1.0-cil{a} libmono-getoptions2.0-cil{a} 
  libmono-i18n-west1.0-cil{a} libmono-i18n1.0-cil{a} libmono-i18n2.0-cil{a} 
  libmono-ldap1.0-cil{a} libmono-ldap2.0-cil{a} 
  libmono-management2.0-cil{a} libmono-messaging-rabbitmq2.0-cil{a} 
  libmono-messaging2.0-cil{a} libmono-microsoft-build2.0-cil{a} 
  libmono-microsoft7.0-cil{a} libmono-microsoft8.0-cil{a} 
  libmono-npgsql1.0-cil{a} libmono-npgsql2.0-cil{a} 
  libmono-oracle1.0-cil{a} libmono-oracle2.0-cil{a} libmono-peapi1.0-cil{a} 
  libmono-peapi2.0-cil{a} libmono-posix1.0-cil{a} 
  libmono-rabbitmq2.0-cil{a} libmono-relaxng1.0-cil{a} 
  libmono-relaxng2.0-cil{a} libmono-security1.0-cil{a} 
  libmono-sharpzip0.6-cil{a} libmono-sharpzip0.84-cil{a} 
  libmono-sharpzip2.6-cil{a} libmono-simd2.0-cil{a} 
  libmono-sqlite1.0-cil{a} libmono-sqlite2.0-cil{a} 
  libmono-system-data1.0-cil{a} libmono-system-data2.0-cil{a} 
  libmono-system-ldap1.0-cil{a} libmono-system-ldap2.0-cil{a} 
  libmono-system-messaging1.0-cil{a} libmono-system-messaging2.0-cil{a} 
  libmono-system-runtime1.0-cil{a} libmono-system-runtime2.0-cil{a} 
  libmono-system-web-mvc1.0-cil{a} libmono-system-web-mvc2.0-cil{a} 
  libmono-system-web1.0-cil{a} libmono-system-web2.0-cil{a} 
  libmono-system1.0-cil{a} libmono-tasklets2.0-cil{a} libmono-wcf3.0-cil{a} 
  libmono-webbrowser0.5-cil{a} libmono-windowsbase3.0-cil{a} 
  libmono-winforms1.0-cil{a} libmono-winforms2.0-cil{a} libmono0{a} 
  libmono1.0-cil{a} libmono2.0-cil{a} libnunit-cil-dev{a} 
  libnunit2.4-cil{a} libsqlite0{a} mono-2.0-devel{a} mono-csharp-shell{a} 
  mono-devel{a} mono-gmcs{a} monodevelop monodoc-base{a} monodoc-manual{a} 
0 packages upgraded, 82 newly installed, 0 to remove and 5 not upgraded.
Need to get 31.8MB of archives. After unpacking 90.2MB will be used.
Do you want to continue? [Y/n/?] Y
WARNING: untrusted versions of the following packages will be installed!

Untrusted packages could compromise your system's security.
You should only proceed with the installation if you are certain that
this is what you want to do.

  libgluezilla libsqlite0 libgdiplus 

Do you want to ignore this warning and proceed anyway?
To continue, enter "Yes"; to abort, enter "No": No
Abort.
Y
y
--2012-06-22 00:38:36--  https://raw.github.com/nicolargo/loicinstaller/master/loic.sh
Resolving raw.github.com... 207.97.227.243
Connecting to raw.github.com|207.97.227.243|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2331 (2.3K) [text/plain]
Saving to: `loic.sh'

100%[==============================================================================================================>] 2,331       --.-K/s   in 0s      

2012-06-22 00:38:38 (632 MB/s) - `loic.sh' saved [2331/2331]

/usr/bin/git
Initialized empty Git repository in /sbin/loic/LOIC/.git/
remote: Counting objects: 385, done.
remote: Compressing objects: 100% (194/194), done.
remote: Total 385 (delta 225), reused 344 (delta 186)
Receiving objects: 100% (385/385), 622.26 KiB | 180 KiB/s, done.
Resolving deltas: 100% (225/225), done.
./loic.sh: line 75: mdtool: command not found
/usr/bin/git
Current branch master is up to date.
/usr/bin/git
./loic.sh: line 75: mdtool: command not found
Y
y
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package monodoc-base is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Y
y

You can now open a shell and type: sbrpwn
and it will do this...
./install: line 178: sbrpwn: command not found
You have new mail in /var/mail/root
root@bt:~/scripts/HackPack# sbrpwn
sbrpwn: command not found
root@bt:~/scripts/HackPack#

Has anyone tried installing this tool.. Should I go ahead with the untrusted packages? Your input please.
Thanks

You installed it incorrectly. If you follow the directions as I have VERY specifically typed out its...
Move ALL files to desktop for your very first install... then cd Desktop, then chmod +x install, then ./install
When you do it like that it will find sbrpwn.
After your initial update you can just use the update feature, and to answer your question, there is nothing mallicious, or harmful, about anything in HackPack. Thats not my M.O.

**hannah** · 06-22-2012, 04:03 AM

I am not trying to point finger at anyone here just seeking some answers really. As a security conscious person (which we all are in this forum), I had to ask it.
So can you please explain what is the difference between moving all the files in Desktop and then cd Desktop vis a vis just unzipping and then cd to that unzipped folder please.

Many thanks

**Bl4cks4b3r** · 06-22-2012, 01:44 PM

Originally Posted by hannah

I am not trying to point finger at anyone here just seeking some answers really. As a security conscious person (which we all are in this forum), I had to ask it.
So can you please explain what is the difference between moving all the files in Desktop and then cd Desktop vis a vis just unzipping and then cd to that unzipped folder please.

Many thanks

Yeah not a problem, the reason is painfully simple. Its just how I setup the script. I could modify it to cd to Desktop/Bl4ckS4b3r I suppose, but then again its just not how I originally wrote it. I understand the skepticism, but trust me--this is a toolkit I planned on just keeping for myself, and then later was asked by many to release. There is nothing that will harm your computer, or open it up for others, unless the programs themselves (LOIC, Ettercap, NMH, ect) do. My goal was to have the developers include it in BT6. If you have any other questions feel free to ask.

**hannah** · 06-23-2012, 03:55 AM

Originally Posted by Bl4cks4b3r

Yeah not a problem, the reason is painfully simple. Its just how I setup the script. I could modify it to cd to Desktop/Bl4ckS4b3r I suppose, but then again its just not how I originally wrote it. I understand the skepticism, but trust me--this is a toolkit I planned on just keeping for myself, and then later was asked by many to release. There is nothing that will harm your computer, or open it up for others, unless the programs themselves (LOIC, Ettercap, NMH, ect) do. My goal was to have the developers include it in BT6. If you have any other questions feel free to ask.

Ok thanks really for prompt response and thanks for sharing the script. I do have questions and will take this opportunity to ask. Now the question is if I just unzipped all the files in desktop and then chmod +x install file and then run ./install will I still get all the warning for untrusted packages being installed. And if the asnwer is 'yes' then why please? I hope if you do not mind me asking this.

**hannah** · 07-09-2012, 06:00 AM

Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

I do like to use this tool but do not want to get my system open.

Many thanks

**Bl4cks4b3r** · 07-09-2012, 12:00 PM

Originally Posted by hannah

Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

I do like to use this tool but do not want to get my system open.

Many thanks

Its very simple, the toolkit is not "unsecure" in any way shape of form. How you decide to use backtrack might make you unsecure.

**Hanga** · 07-09-2012, 12:36 PM

Originally Posted by hannah

Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

I do like to use this tool but do not want to get my system open.

Many thanks

Here i am , i used this tool since it was v1.2 its very promising and its Very good , simply it makes Life Easier and it does everything you can imagine including Generator for Wifi-cracking it Cracks both WPA and WEP easily By just few steps and it has Lots of stuff that are not available in any other tool..

Greetings,
Hanga

**JohnHenery** · 07-09-2012, 03:06 PM

Originally Posted by hannah

Just raising it again this issue of untrusted packages being installed. Has anyone used this tool. If yes what is your opinion as I am not getting much response from Bl4cks4b3r?

I do like to use this tool but do not want to get my system open.

Many thanks

Good to see it finally getting out there.

I have not once had any problems with hackpack. Well, some problems but that was just simple bugs from the original release.

I don't know why it matters how you extract it, or where you extract it too, but if i were to take an educated guess, I would think it's because, that's how the creator made it.

and as for the messages, i'd imagine that there's some sort of process that all programs have to go through to be determined safe, and since this is still a new script, then it hasn't gone through all the channels it takes to be labeled safe.

**hannah** · 07-13-2012, 09:36 PM

Ok it's quite obvious to me that it's a great tool to use and I personally like to use it as well. Many thanks to Bl4cks4b3r for creating this tool.

Let me just to go back to what I initially asked: Please look at post #1.

All what I am saying when I was installing this HackPack tool I have see in my terminal this message"

Code:

WARNING: untrusted versions of the following packages will be installed!

I am just seeking an answer for this message. Why this tool Hackpack needs to install untrusted version of some packages?

Please note that this is not a dig any anyone really and I am thankful that Bl4cks4b3r took time to create this tool.

Cheers and have a good weekend.

BackTrack Linux - Penetration Testing Distribution

Thread: HackPack Tool : WARNING: untrusted versions of the following packages will be install

Thread Tools

Search Thread

Display

HackPack Tool : WARNING: untrusted versions of the following packages will be install

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Re: HackPack Tool : WARNING: untrusted versions of the following packages will be ins

Similar Threads

k3b install ,E: Broken packages

50% done - Compiling .deb packages - From BackTrack 3 tool list - Anyone want them?

can not install packages....

some request (BT packages LIST and BT packages archive)

Hot to install newest versions of apps into BT2 image

Posting Permissions