Page 14 of 14 FirstFirst ... 4121314
Results 131 to 136 of 136

Thread: Soft AP / Phishing Script [Release]

  1. #131

    Default Re: Soft AP / Phishing Script [Release]

    Thankyou! It's works wonderfully. I only know a little about coding, enough to go through it and understand it but what I really love is when I read coding as well documented as yours Again major kudos to you. Again awesome work.

  2. #132
    Just burned their ISO
    Join Date
    Mar 2013
    Posts
    2

    Default Re: Soft AP / Phishing Script [Release]

    i solve my problem can delete this post
    Last edited by korisnickoime; 03-20-2013 at 11:13 AM. Reason: i solve my problem

  3. #133

    Default Re: Soft AP / Phishing Script [Release]

    Hi! Do you have any plans for making the script available for Kali Linux? Just now attempted to use it on the new distribution and came to a few errors. Specifically with the dhcp. When installing dhcp3-server instead it chooses to install isc-dhcp-server, and around line 730 of the script is where it fails now.
    Code:
    # Gives dhcpd the permissions it needs, avoids PID lock error message
    	mkdir -p /var/run/dhcpd && chown dhcpd:dhcpd /var/run/dhcpd
    The error outputs are something like dhcpd:dhcpd invalid user, and No such file or directory.

    To start the ISC Server, I have to issue this command: service isc-dhcp-server start , which puts out this error, "FAIL] Starting ISC DHCP server: dhcpd[....] check syslog for diagnostics. ... failed!"

    The contents of the syslog error are as follow:
    Code:
     Not configured to listen on any interfaces!
    Mar 20 23:52:41 kali dhcpd: Internet Systems Consortium DHCP Server 4.2.2
    Mar 20 23:52:41 kali dhcpd: Copyright 2004-2011 Internet Systems Consortium.
    Mar 20 23:52:41 kali dhcpd: All rights reserved.
    Mar 20 23:52:41 kali dhcpd: For info, please visit https://www.isc.org/software/dhcp/
    Mar 20 23:52:41 kali dhcpd: Internet Systems Consortium DHCP Server 4.2.2
    Mar 20 23:52:41 kali dhcpd: Copyright 2004-2011 Internet Systems Consortium.
    Mar 20 23:52:41 kali dhcpd: All rights reserved.
    Mar 20 23:52:41 kali dhcpd: For info, please visit https://www.isc.org/software/dhcp/
    Mar 20 23:52:41 kali dhcpd: Wrote 0 leases to leases file.
    Mar 20 23:52:42 kali dhcpd: 
    Mar 20 23:52:42 kali dhcpd: No subnet declaration for wlan0 (192.168.1.8).
    Mar 20 23:52:42 kali dhcpd: ** Ignoring requests on wlan0.  If this is not what
    Mar 20 23:52:42 kali dhcpd:    you want, please write a subnet declaration
    Mar 20 23:52:42 kali dhcpd:    in your dhcpd.conf file for the network segment
    Mar 20 23:52:42 kali dhcpd:    to which interface wlan0 is attached. **
    Unfortunately I cannot locate any dhcpd.conf file in anycase so,
    I'm not sure exactly how to go about and implement a fix.

    Thank you!

    *EDIT
    The files is/are located at /etc/dhcp/dhcpd.conf.
    and /etc/default/isc-dhcp-server

    Added to dhcpd.conf
    "subnet 192.168.1.0 netmask 255.255.255.0 {
    range 192.168.1.10 192.168.1.100;
    range 192.168.1.150 192.168.1.200;
    }"
    And to isc-dhcp-server " INTERFACES="wlan0""

    And now succesfully able to start the dhcp server.. So no just need to figure out how to edit the script to call the right commands.

    *EDIT2
    Sorry for adding this to the thread. I got it back working. In addition to my first Edit, to the script I had to change the following to make it Kali compliant.
    Around line 640, I made it to:
    Code:
    sleep 20 # for at0 to be started - crucial 10 was default
    Because (for me) the default sleep was not long enough.
    Around line 704, I did:
    Code:
    echo > /var/lib/dhcp/dhcpd.leases  # Clear any pre-existing dhcp leases, default was /var/lib/dhcp3/dhcpd.leases
    And line 732
    Code:
    dhcpd -cf /tmp/dhcpd.conf -pf /var/run/dhcpd/dhcpd.pid at0 & ### -pf /var/run/dhcp3-server/dhcpd.pid # Default was dhcpd3
    I hope it helps someone else
    Last edited by charonsecurity; 03-20-2013 at 03:59 PM.

  4. #134
    Just burned their ISO
    Join Date
    Mar 2013
    Posts
    2

    Default Re: Soft AP / Phishing Script [Release]

    I have new problem too i get broadcast probe request and direct probe request but dns taill box dosent show anythin and when i go 192.168.0.1 on PC runing Fake AP it showe portal_hotspot good and it works it shows otput in formdata.txt but when i connect whit phone it just showes white fore 4-5 sec and lost connection, i noticed i think while loeading scirpt i think it sed somewer dhcpd:dhcpd error but it all goes awey in a sec and nothing is stoping or somthing bad like then.
    Can you help or do you need more info, in 2 days i will try whit my laptop to connect meybe it is somthing wrong whit phone?

    Sorry for bad english i know i am grammer tard

  5. #135
    Senior Member VulpiArgenti's Avatar
    Join Date
    Sep 2011
    Location
    lost
    Posts
    174

    Default Re: Soft AP / Phishing Script [Release]

    Hi charonsecurity, thanks for posting your fixes. I will update the script in due course, but at the moment am struggling trying to make a bootable install of Kali on my spare macbook air. It may be a while!

  6. #136
    Senior Member VulpiArgenti's Avatar
    Join Date
    Sep 2011
    Location
    lost
    Posts
    174

    Default Re: Soft AP / Phishing Script [Release]

    Hi korisnickoime, if you start the script with "bash -x (path to script)", you should be able to scroll up and find any error messages. It will also slow down the script to help with any timing problems.

Page 14 of 14 FirstFirst ... 4121314

Similar Threads

  1. SET 0.7 phishing demo
    By pentest09 in forum BackTrack Videos
    Replies: 7
    Last Post: 12-19-2010, 10:31 PM
  2. Soft AP Upside Down image help pls, script nearly works
    By spriggsy in forum Beginners Forum
    Replies: 0
    Last Post: 11-05-2010, 12:01 PM
  3. Soft AP Script not working?
    By spriggsy in forum Beginners Forum
    Replies: 1
    Last Post: 05-19-2010, 01:08 PM
  4. Soft AP bash script
    By junke1990 in forum OLD Wireless
    Replies: 1
    Last Post: 04-03-2010, 08:30 AM
  5. backtrack 4 pre release user login script
    By eidos in forum OLD Newbie Area
    Replies: 1
    Last Post: 07-30-2009, 09:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •