testers for new wpa gui wanted ....

[-=Xploitz=-]

just for a check before i send betas tomorrow.....

is this right for wpa_supplicant

# WPA-PSK/TKIP

ctrl_interface=/var/run/wpa_supplicant

network={
ssid="SSID"
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
group=TKIP
psk="PASS"
}

# WPA-PSK/AES

ctrl_interface=/var/run/wpa_supplicant

network={
ssid="SSID"
key_mgmt=WPA-PSK
proto=WPA
pairwise=CCMP
group=TKIP
psk="PASS"
}


#WPA2-PSK-tkip
network={
ssid="SSID"
key_mgmt=WPA2-PSK
proto=RSN
pairwise=TKIP
group=TKIP
psk="PASS"
}


i never use wpa-supplicant cause i use rt73s only, and it's not compliant.....so if you can correct my conf errors before i send beta will help me a lot

thx

Now you know I got tutorials out that have these in them Niko...shame on you! I noticed yours are slightly different than mine though.

I know all of these work Niko.


-=Xploitz=- Tutorial: E-Z Connect To WPA Personal With TKIP


ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
# ap_scan=2 was the one for me you may try 0 or 1 indstead of 2
ap_scan=2
fast_reauth=1

network={
ssid="Xploitz Network"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk="-=Xploitz=-"
}



-=Xploitz=- TUTORIAL: E-Z Connect To WPA2 Personal WithTKIP+AES



ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1

network={
ssid="Xploitz Network"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="-=Xploitz=-"
}




-=Xploitz=- TUTORIAL: E-Z Connect To WPA Personal With AES


ctrl_interface=/var/run/wpa_supplicant
network={
ssid="Xploitz Network"
key_mgmt=WPA-PSK
proto=WPA
pairwise=CCMP TKIP
group=CCMP TKIP
psk="-=Xploitz=-"
priority=3
}




UNTESTED BELOW NIKO!!!!



RADIUS or WPA2 Enterprise


# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the old
peaplabel

network={
ssid="Xploitz Network"
scan_ssid=1
key_mgmt= WPA-EAP
eap=PEAP
identity="your-username"
password="your-password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
priority=1
}



Another untested Radius or WPA2 Enterprise

WPA-RADIUS/EAP-PEAP/MSCHAPv2 with RADIUS servers that use old peaplabel
(e.g., Funk Odyssey and SBR, Meetinghouse Aegis, Interlink RAD-Series)

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
network={
ssid="Xploitz Network"
scan_ssid=1
key_mgmt=WPA-EAP
eap=PEAP
identity="user@example.com"
password="foobar"
ca_cert="/etc/cert/ca.pem"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
}