Results 1 to 2 of 2

Thread: Problems connecting on wireless using DWA-110 adapter

Hybrid View

  1. #1
    Just burned his ISO
    Join Date
    Nov 2011
    Location
    Brazil
    Posts
    3

    Default Problems connecting on wireless using DWA-110 adapter

    Hi ppl. I am brazilian and my english is not so good, so sorry for any misunderstanding.
    My problem is the following: I installed the BackTrack 5 (Gnome) on VirtualBox and cant access the internet!
    The details:
    - Using a D-Link DWA-110 wireless USB adapter (sharing the adapter on VirtualBox);
    - Trying to connect to a router with WPA2-PSK encryption.
    - Using the WICD network manager (1.7) I got a Bad password error. I connect only 2 times and the internet was very slow and cant reach any host on the network.
    - I using the rt73 driver (looking at http://linux-wless.passys.nl/ is the correct driver)
    - My problem is only to connect in wireless, I bridged my notebook internet connection and is fine.

    Outputs:

    Code:
    root@bt:~# iwconfig
    lo        no wireless extensions.
    
    eth2      no wireless extensions.
    
    wlan0     IEEE 802.11bg  ESSID:off/any  
              Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:on

    Code:
    root@bt:~# ifconfig
    eth2      Link encap:Ethernet  HWaddr MACADDRESS
              inet addr:192.168.0.102  Bcast:192.168.0.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe0d:b324/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:30 errors:0 dropped:0 overruns:0 frame:0
              TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:3741 (3.7 KB)  TX bytes:1638 (1.6 KB)
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:20 errors:0 dropped:0 overruns:0 frame:0
              TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:1280 (1.2 KB)  TX bytes:1280 (1.2 KB)
    
    wlan0     Link encap:Ethernet  HWaddr MACADDRESS
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

    Code:
    root@bt:~# lspci
    00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
    00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
    00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
    00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
    00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
    00:06.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
    00:11.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 02)
    Code:
    root@bt:~# lsusb
    Bus 001 Device 003: ID 07d1:3c07 D-Link System Wireless G DWA-110 Adapter
    Bus 001 Device 002: ID 80ee:0021  
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    The wicd log:
    Code:
    2011/11/29 19:59:04 :: Connecting to wireless network MYNETWORK
    2011/11/29 19:59:04 :: iwconfig wlan0
    2011/11/29 19:59:04 :: /sbin/dhcpcd-bin -k wlan0
    2011/11/29 19:59:04 :: ifconfig wlan0 0.0.0.0 
    2011/11/29 19:59:04 :: /sbin/ip route flush dev wlan0
    2011/11/29 19:59:04 :: ifconfig wlan0 down
    2011/11/29 19:59:05 :: ifconfig wlan0 up
    2011/11/29 19:59:06 :: wpa_cli -i wlan0 terminate
    2011/11/29 19:59:06 :: ifconfig wlan0
    2011/11/29 19:59:06 :: Putting interface down
    2011/11/29 19:59:06 :: ifconfig wlan0 down
    2011/11/29 19:59:06 :: iwconfig wlan0
    2011/11/29 19:59:09 :: Releasing DHCP leases...
    2011/11/29 19:59:09 :: /sbin/dhcpcd-bin -k wlan0
    2011/11/29 19:59:09 :: Setting false IP...
    2011/11/29 19:59:09 :: ifconfig wlan0 0.0.0.0 
    2011/11/29 19:59:11 :: Stopping wpa_supplicant
    2011/11/29 19:59:11 :: wpa_cli -i wlan0 terminate
    2011/11/29 19:59:11 :: Flushing the routing table...
    2011/11/29 19:59:11 :: /sbin/ip route flush dev wlan0
    2011/11/29 19:59:11 :: iwconfig wlan0 mode managed
    2011/11/29 19:59:11 :: Putting interface up...
    2011/11/29 19:59:11 :: ifconfig wlan0 up
    2011/11/29 19:59:13 :: enctype is wpa
    2011/11/29 19:59:13 :: Generating psk...
    2011/11/29 19:59:13 :: ['/usr/bin/wpa_passphrase', 'MYNETWORK', 'MYPASSWORD']
    2011/11/29 19:59:13 :: Attempting to authenticate...
    2011/11/29 19:59:13 :: ['wpa_supplicant', '-B', '-i', 'wlan0', '-c', '/var/lib/wicd/configurations/002401a9801e', '-D', 'wext']
    2011/11/29 19:59:13 :: ['iwconfig', 'wlan0', 'essid', '--', 'MYNETWORK']
    2011/11/29 19:59:13 :: iwconfig wlan0 channel 1
    2011/11/29 19:59:13 :: iwconfig wlan0 ap MACADDRESS
    2011/11/29 19:59:13 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:14 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:15 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:16 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:17 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:18 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:19 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:20 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:21 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:22 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:23 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:24 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:25 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:26 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:27 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:28 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:29 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:30 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:31 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:32 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:33 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:34 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:35 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:37 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:38 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:39 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:40 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:41 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:42 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:43 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:44 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:45 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:46 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:47 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:48 :: WPA_CLI RESULT IS SCANNING
    2011/11/29 19:59:49 :: wpa_supplicant authentication may have failed.
    2011/11/29 19:59:49 :: connect result is Failed
    2011/11/29 19:59:49 :: exiting connection thread
    2011/11/29 19:59:49 :: Sending connection attempt result bad_pass
    2011/11/29 19:59:49 :: ifconfig wlan0
    2011/11/29 19:59:49 :: Forced disconnect on
    2011/11/29 19:59:49 :: iwconfig wlan0
    2011/11/29 19:59:49 :: /sbin/dhcpcd-bin -k wlan0
    2011/11/29 19:59:49 :: ifconfig wlan0 0.0.0.0 
    2011/11/29 19:59:49 :: /sbin/ip route flush dev wlan0
    2011/11/29 19:59:49 :: ifconfig wlan0 down
    2011/11/29 19:59:51 :: ifconfig wlan0 up
    2011/11/29 19:59:53 :: wpa_cli -i wlan0 terminate
    2011/11/29 19:59:53 :: iwconfig wlan0
    2011/11/29 19:59:54 :: ifconfig wlan0
    2011/11/29 19:59:56 :: ifconfig wlan0
    2011/11/29 19:59:58 :: found netprop_width in configuration 414
    2011/11/29 19:59:58 :: found netprop_height in configuration 600
    2011/11/29 20:00:00 :: ifconfig wlan0
    2011/11/29 20:00:02 :: ifconfig wlan0
    Any help is appreciated.
    Thank you.

  2. #2
    Just burned his ISO
    Join Date
    Nov 2011
    Location
    Brazil
    Posts
    3

    Default Respuesta: Problems connecting on wireless using DWA-110 adapter

    Ok, I give up VirtualBox and use a Live USB of BackTrack 5 and the wireless is now properly working. My problem now seems to be very simple, the Ettercap (Gtk, Curses and Text Interface) dont show passwords. I execute a MITM on my network using either Ettercap or arpspoof and the ettercap gives me nothing. Capturing the traffic in Wireshark give me the passwords, but in Ettercap dont! What is going on?

Similar Threads

  1. Having problems with my Wireless USB connecting my Access Point
    By Johndoe1893 in forum OLD Newbie Area
    Replies: 6
    Last Post: 02-27-2009, 09:35 PM
  2. Problems connecting to WLAN
    By jaker29902 in forum OLD Newbie Area
    Replies: 8
    Last Post: 08-10-2008, 07:44 AM
  3. Problems connecting to network
    By n00b_h4xx0r in forum OLD BT3beta
    Replies: 8
    Last Post: 04-22-2008, 09:51 AM
  4. Problems connecting WPA2 TKIP+AES
    By Synck in forum OLD Newbie Area
    Replies: 9
    Last Post: 09-10-2007, 07:45 PM
  5. USB Wireless Adapter Heat Problems?
    By StriderZ in forum OLD Newbie Area
    Replies: 2
    Last Post: 09-07-2007, 04:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •