-=Xploitz=- TUTORIAL: E-Z Connect To WPA Personal With AES

[samsung]

Could you please post output of wpa_supplicant with -dd option?
Just run it like you normally do, but add in the end -dd.

I've switched it off for now its been a long day @ work

If your meaning where the -c is & replacing it with -dd
I tired this but nothing happens, it just give a list of all the options you can use
-d
-c
-C
etc.... so its as if the -dd option is not allowing me to run it
to be honest i've worked 14hrs straight so am probably not doing someting correct, i'll have another go when I recharge my batteries & get some sleep lol, thanks again for your speedy reply

[Neklez]

I've switched it off for now its been a long day @ work

If your meaning where the -c is & replacing it with -dd
I tired this but nothing happens, it just give a list of all the options you can use
-d
-c
-C
etc.... so its as if the -dd option is not allowing me to run it
to be honest i've worked 14hrs straight so am probably not doing someting correct, i'll have another go when I recharge my batteries & get some sleep lol, thanks again for your speedy reply

No i ment after the .conf

Like wpa_supplicant -Dwext -iath0 -c/where/ever/wpa_supplicant.conf -dd

But let's see tomorrow then, good night

[samsung]

No i ment after the .conf

Like wpa_supplicant -Dwext -iath0 -c/where/ever/wpa_supplicant.conf -dd

But let's see tomorrow then, good night

hi, this is the update i've tried & it seems to be doing something different, Ive tried this both before & after doing wpa handshake with changing the mode to managed both times & same results arrghhh I'm thinking of giving up


bt etc # wpa_supplicant -w -Dwext -iath0 -c/etc wpa_supplicant.conf -dd
Initializing interface 'ath0' conf '/etc'
driver 'wext' ctrl_interface 'N/A'
Configuration file '/etc' -> '/etc'
Reading configuration file '/etc'

Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED

EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
E
AP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=20 WE(source)=13 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf Own MAC address: 00:0f:b5:ef:53:3d
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0
key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key:
alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface ath0
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=8
Received 818 bytes of scan results (3 BSSes)
Scan results: 3
No suitable AP found.
Setting scan request: 5 sec 0 usec
No enabled networks - do not scan
State: SCANNING -> INACTIVE
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Ignore event for foreign ifindex 7
l2_packet_receive - recvfrom: Network is down
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added

CTRL-EVENT-TERMINATING - signal 2 received
Removing interface ath0
State: INACTIVE -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request

[Neklez]

hi, this is the update i've tried & it seems to be doing something different, Ive tried this both before & after doing wpa handshake with changing the mode to managed both times & same results arrghhh I'm thinking of giving up

bt etc # wpa_supplicant -w -Dwext -iath0 -c/etc wpa_supplicant.conf -dd

Sorry, but i can't help you because you don't listen what i say. I said before that you can't use -c/etc wpa_supplicant.conf because it's not the right path to config.

So you have to find out what is path to your config and use -c option properly.

[samsung]

Sorry, but i can't help you because you don't listen what i say. I said before that you can't use -c/etc wpa_supplicant.conf because it's not the right path to config.

So you have to find out what is path to your config and use -c option properly.

Damn, I totally forgot about the path, that MUST be the fault, I do & Did listen to you I'll try this later

[-=Xploitz=-]

Damn, I totally forgot about the path, that MUST be the fault, I do & Did listen to you I'll try this later

I though you saw it and changed it..lol

No wonder I'm bashing my head in trying to figure this out!


I was really not looking forward to seeing a new post in this thread. (No offense to you samsung)

I really hope to ("The G man") that this fixes your problem this time samsung.

[samsung]

I though you saw it and changed it..lol

No wonder I'm bashing my head in trying to figure this out!


I was really not looking forward to seeing a new post in this thread. (No offense to you samsung)

I really hope to ("The G man") that this fixes your problem this time samsung.

I know I know lol, too many long hours @ work & then getting home & 1/2 assed trying to do it, I should have just waited till the weekend, I know now that I didnt change the path & this must be the cause of it, I do hope that this does resolve it

[bumskins]

Awesome stuff, had been troubling me for ages.

[-=Xploitz=-]

Awesome stuff, had been troubling me for ages.

Glad it worked for you. What chipset and laptop were you using??

[-=Xploitz=-]

I know I know lol, too many long hours @ work & then getting home & 1/2 assed trying to do it, I should have just waited till the weekend, I know now that I didnt change the path & this must be the cause of it, I do hope that this does resolve it

Hey samsung! Possibly some good tidings I bring you this time. (I hope)

Just had someone in another on of my connection tutorials tell me that they had their router set to "n" mode. What mode is your AP in?? G/N---mixed?? Change it to mixed or g only and this might help.