ok guys you can get it working by following my step by steps

guide i followed but really its a guide that has links to other guides.
it is closed because its BT4 and no longer supported.
http://www.backtrack-linux.org/forum...ike-charm.html

just got this beast (WUSB600N V2 with ralink rt3572 chipset) monitoring/injecting like a charm under backtrack 4 final running on vmware

follow this french guide for rt2070/rt3070 (translate with google):
http://www.crack-wpa.fr/forum/viewtopic.php?id=2169

with a notes mentioned here for "rt3070v2-next" branch

Please Help! With AWUS036NH RT2800 Driver Under uNetBootin USB BackTrack 4f

do not forget to blacklist what has to be blacklisted - see the guide for a precompiled kernel in the same thread a couple off messages above (but I think you will have to compile the kernel yourself instead of using the precompiled version)
http://forum.aircrack-ng.org/index.p...37474#msg37474

during kernel configuration ('make menuconfig') i have ONLY selected <M> for "Ralink rt2800 (USB) support (EXPERIMENTAL)" and "{*}" for "rt2800usb - Include support for unknown (USB) drivers"

before compiling the package, ensure to fix 2 minor issues, mentioned in the same thread a couple of messages below

I also had to download and extract rt3071.bin firmware (yeah, looks more than strange - rt3572 chipset, working with rt2800 driver and rt3071 firmware ) from Debian's firmware-ralink 0.24 staging package here:

Debian -- Details of package firmware-ralink in sidhttp://packages.debian.org/sid/firmware-ralink


Ok now that we got all that out of the way let me just tell you what to do because between all those guides well unless you are an expert GOOD LUCK!

Install Backtrack 5
open up a term and install these packages:
sudo apt-get install fakeroot build-essential crash kexec-tools makedumpfile kernel-wedge kernel-package xmlto
sudo apt-get install git-core libncurses5 libncurses5-dev libelf-dev asciidoc binutils-dev
sudo apt-get build-dep linux
cd ~
mkdir ~/src
cd ~/src

### 2.6.33 kernel at the time of this writing
git clone git://git.popipo.fr/git/rt2x00.git
cd ~/src/rt2x00

### this is also working at the time of this writing
git checkout -b rt3070v2-next origin/rt3070v2-next
cd /src
sudo ln -s ~/src/rt2x00 ~/src/Linu
sudo chmod -R a-s ~/src
cd ~/Linu
gedit ~/src/Linu/Documentation/lguest/Makefile
Changed by
all: lguest
to
all:

### i think fakeroot is need to do that correct..
fakeroot make-kpkg clean

### if you want to use 4 cores
export CONCURRENCY_LEVEL=5
sudo cp -vi /boot/config-`uname -r` /usr/src/Linu/.config

make menuconfig
"Device Drivers>Network device support>Wireless LAN>Ralink driver support>rt2800usb - Include support for unknown (USB) devices" = *
"Device Drivers>Network device support>Wireless LAN>Ralink driver support>Ralink rt2800 (USB) support (EXPERIMINTAL)" = M
"Device Drivers>Network device support>Ethernet 1000Mbit>Intel (R) 82576 Virtual Function Ethernet support" = empty
"Device Drivers>Staging drivers" = empty

### dont have to do this with debian
gedit /usr/share/kernel-package/ruleset/misc/version_vars.mk
change include/linux/utsrelease.h to include/generated/utsrelease.h on lines 141 and 142 of debian/ruleset/misc/version_vars.mk

### this needs done
gedit /usr/src/Linu/arch/x86/vdso/Makefile
replace "-m elf_x86_64" by "-m64" on the line starting with VDSO_LDFLAGS_vdso.lds
replace "-m elf_i386" by "-m32" on the line starting with VDSO_LDFLAGS_vdso32.lds

### you might have to sudo at this step (i forget)
fakeroot make-kpkg --initrd --revision=custom.1.0 kernel_image
cd /src
sudo dpkg -i linux-*.deb

### i always do this just to make sure
sudo update-grub

### now go get the 3071 firmware here. it will say "all" in the link
http://packages.debian.org/sid/firmware-ralink

### then extract that and copy the file to /lib/firmware
sudo cp rt3071.bin /lib/firmware

### i didnt have to blacklist any modules (you might i dont know)
### i have to remove usb adapter and then plug it back in for it to show up in 'lsusb'
### i might be forgetting something idk...let me know and i will fix stuff as needed.

here is is on pastebin so its easy to read also
http://pastebin.com/G4nFWRik

it works...i dont care what they say!!!

ok now if someone can get it working as an AP/MASTER that would be awesome
en1gma

Posts: 1
Joined: 2011-10-26 03:11