OS: BackTrack 5 R1 GNOME 64bit
Make & Model: Belkin F5D8053 v3
Chipset: Ralink RT2870/3070
Driver: rt2800usb
Injection: No
Method: Worked out of the box
Code:
root@bt:~# ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:22:75:3b:aa:xx
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@bt:~# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
root@bt:~# lsusb | grep Wireless
Bus 001 Device 005: ID 050d:815c Belkin Components F5D8053 N Wireless USB Adapter v3000 [Ralink RT2870]
root@bt:~# ls -l /sys/class/net/wlan0/device/driver
lrwxrwxrwx 1 root root 0 2011-10-12 17:19 /sys/class/net/wlan0/device/driver -> ../../../../../../bus/usb/drivers/rt2800usb
root@bt:~# lsmod | grep rt2800usb
rt2800usb 12228 0
rt2800lib 40789 1 rt2800usb
rt2x00usb 10496 1 rt2800usb
rt2x00lib 37138 3 rt2800usb,rt2800lib,rt2x00usb
root@bt:~# airmon-ng
Interface Chipset Driver
wlan0 Ralink RT2870/3070 rt2800usb - [phy0]
root@bt:~# airmon-ng start wlan0 13
Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!
PID Name
1290 dhclient3
6559 dhclient3
Process with PID 6559 (dhclient3) is running on interface wlan0
Interface Chipset Driver
wlan0 Ralink RT2870/3070 rt2800usb - [phy0]
(monitor mode enabled on mon0)
root@bt:~# aireplay-ng -9 mon0
17:23:04 Trying broadcast probe requests...
17:23:06 No Answer...
17:23:06 Found 1 AP
17:23:06 Trying directed probe requests...
17:23:06 00:19:5B:E7:52:xx - channel: 13 - 'SSID'
17:23:12 0/30: 0%
root@bt:~#