Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 77

Thread: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

  1. #51
    Just burned his ISO
    Join Date
    Sep 2012
    Posts
    2

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    I finally got mine working and cracked my WEP after a long time My problem is why can't I connect to a network with Alfa Awush 036nhr using backtrack? it says bad password!!! i am trying to use armitage but cant.

  2. #52
    Just burned his ISO
    Join Date
    Aug 2012
    Posts
    2

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Quote Originally Posted by manzamanna View Post
    --- BT5r1 Gnome 32bit fresh install:

    Trying card-to-card injection...
    Attack -0: OK
    Attack -1 (open): OK
    Attack -1 (psk): OK
    Attack -2/-3/-4/-6: OK
    Attack -5/-7: OK
    Injection is working!
    http://linuxwireless.org/en/users/Drivers/carl9170 in "/lib/firmware" and it will load
    I followed the guide step by step, but I get this:

    Code:
    18:28:10  Trying card-to-card injection...
    18:28:10  Attack -0:           OK
    18:28:10  Attack -1 (open):    OK
    18:28:11  Attack -1 (psk):     OK
    18:28:15  Attack -2/-3/-4/-6:  Failed
    18:28:19  Attack -5/-7:        Failed
    Do you know how to fix my problem ?

  3. #53
    Just burned his ISO
    Join Date
    Jun 2011
    Posts
    10

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Well, I got mine working. I went through the same process as poor lost soul, except with compat-wireless 3.6rc6. I'm using bt5r3, and apparently there isn't a 3.2.6.patches.tar on the bt website that i've found, so i skipped that step. At any rate, after compiling and installing, reaver is running fine, but channel hopping is not. I remember seeing this somewhere else. I'll poke at it and keep you informed.

  4. #54
    Just burned his ISO
    Join Date
    Sep 2012
    Posts
    1

    Red face Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    I am a beginer using linux....i tried to follow the steps but still get problem my chipset still unknown for ALFA AWUS036NHR. Otherwise when i try to scan wireless it can not detetc the access point nearby..Any body can solve my problem.

  5. #55
    Just burned his ISO
    Join Date
    Jun 2011
    Posts
    10

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Update! See? I'm a man of my word.

    So i ran reaver, it worked, figured everything was working. Well, it wasn't. I started poking around trying to get master mode to work with iwconfig, and it wouldn't work. So i went back through the process again with different settings, and injection is working as well as channel hopping. Forgive me if I do not paste logs, but I'm posting from a different computer.

    Again this is BT5r3 Gnome64. Followed lost soul's process again, this time I followed the KDE instructions using wget http://linuxwireless.org/download/co...-09-27.tar.bz2 and making the appropriate modifications. This was sans-patch. I didn't even check if there was a patch this time. Meh.

    At any rate, what's not working is master mode. I'm going to have to poke around and see if I can get airbase working. There's a mesh mode and another mode that might work. Again, will keep you posted.

  6. #56
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    1

    Exclamation Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Its now Plug and Play It works now on BackTrack r3! INJECTION 100% =) Thank You BackTrack Team

  7. #57
    Just burned his ISO
    Join Date
    Apr 2010
    Posts
    2

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Hi Rubaz

    I'm trying to use the same card and BT5r3 on a VMWare and no luck so far
    could you please let me know exactly what steps did you followed to get it working ?

    Many Thanks

  8. #58
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    2

    Thumbs up Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    Edit: I've given up on this adapter and went back to the AWUS036H (I've also got a AWUS036NH on the side).

    Just exchanged my AWUS036H for the AWUS036NHR (because I need it to work with OSX 10.8.2 on my Macbook Air (2010)).

    First of all, maybe a N00B-question, but; Why does the USB Cable provided has 2 Male USB connectors? Is this for low-voltage USB-ports on specific computers? Do I need to connect both on my MacBook as well? I've connected the one that comes from the main-cable, the other one is disconnected.

    I've downloaded the RTL8188RU for OSX 10.8 directly from the RealTek website:
    http://www.realtek.com.tw/DOWNLOADS/...Downloads=true

    It's a lot faster then trying to download the driver from the Alfa website and it works perfectly. Tested and working on my MacBook.

    I'm running BackTrack 5 R3 32-Bit GNOME (iSO) via VMWare Fusion 5 on OSX 10.8.2 and after a apt-get update it seems its working perfectly out of the box:

    Code:
    Interface Chipset Driver
    mon0 Unknown rtl8192cu - [phy0]
    wlan1 Unknown rtl8192cu - [phy0]
    Code:
    root@bt:~# aireplay-ng -9 -i mon0 wlan1
    For information, no action requiered: Using gettimeofday() instead of /dev/rtc
    
    16:42:04 Trying broadcast probe requests...
    16:42:04 Injection is working!
    16:42:06 Found 5 APs
    
    16:42:06 Trying direct probe requests...
    16:42:06 54:E6:FC:C4:11:A4 -channel: 1 - 'ciber_rojas'
    16:42:10 Ping (min/avg/max): 4.364ms/8.776ms/12.736ms Power: -36.00
    16:42:10 11/30: 36%
    
    16:42:24 Trying card-to-card injection...
    16:42:24 Attack -0: OK
    16:42:24 Attack -1 (open): OK
    16:42:24 Attack -1 (psk): OK
    16:42:24 Attack -2/-3/-4/-6: OK
    16:42:24 Attack -5/-7: OK
    root@bt:~#
    I've also succesfully injected packets on WEP and cracked with Aircrack-ng 10.000 IVs

    Code:
    Read 56221 packets (got 17449 ARP requests and 0 ACKS), sent 23049 packets... (500pps)
    Beini 1.2.3 on VMWare Fusion 5:
    - I did a succesful DeAuth and got a Handshake

    Xiaopan 0.4.1 on VMWare Fusion 5:
    - I did NOT succesfully used Reaver, it associates, but can't use the pin's

    BackTrack 5 R3 32Bit Gnome on VMWare Fusion 5:
    - I did NOT succesfully used Reaver, it associates, but can't use the pin's and get's time-outs
    - With Wicd Network Manager I'm able to see/scan/connect to wireless networks as well.
    - Succesfull Injection WEP
    - WPA Handshake NOT possible

    BackTrack 5 R3 64Bit Gnome on VMWare Fusion 5:
    - I did NOT succesfully used Reaver, it associates, but can't use the pin's and get's time-outs
    - With Wicd Network Manager I'm able to see/scan/connect to wireless networks as well.
    - Succesfull Injection WEP
    - WPA Handshake NOT possible
    - I get ARPs not ACKs
    - DeAuth = working, but handshake has not been received

    I Hope this information is helpfull to anyone.
    Last edited by deeltje; 10-23-2012 at 02:12 PM.

  9. #59
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    2

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    my card worked out of the box with bt5 r3, vm ware on win7. cracked my wep and wpa first time round. thanks for all you help . new to all this but keen to learn

  10. #60
    Just burned his ISO
    Join Date
    Sep 2012
    Posts
    2

    Default Re: ALFA AWUS036NHR - chip RTL8188RU - compat-wireless driver rtl8192cu

    can you guys use this card connecting to internet trough backtrack5. everything works fine for me but i cannot connect to internet with this card. if you know anything about this, a solution please let me know.

Page 6 of 8 FirstFirst ... 45678 LastLast

Similar Threads

  1. alfa awus036nhr
    By Bendfella in forum Working Hardware
    Replies: 14
    Last Post: 11-03-2012, 09:23 PM
  2. compat-wireless driver issue
    By zlate in forum Beginners Forum
    Replies: 0
    Last Post: 07-19-2010, 01:34 PM
  3. Alfa AWUS050NH + rt2x00 from compat-wireless
    By fnord0 in forum OLD BT4beta Working Hardware
    Replies: 44
    Last Post: 03-15-2010, 02:58 PM
  4. Compat-Wireless driver
    By BT User in forum OLD BT4 Feature Requests
    Replies: 0
    Last Post: 12-28-2009, 07:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •