Problem about benchmark pyrit with cuda support

[tranquilo]

I use cpyrit install from the source
and this is my benchmark

Computed 1167.99 PMKs/s total.
#1: 'CUDA-Device #1 'Quadro NVS 160M'': 469.6 PMKs/s (RTT 2.9)
#2: 'CPU-Core (SSE2)': 450.5 PMKs/s (RTT 2.7)

is this output is correct
because in my gpu , I have 8 core but from this benchmark
it tell me that i have only one core?

[FullOn]

This is correct. As far as I can tell it won't list out each separate core for your GPU, only your CPU.

Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg pyrit - WPA/WPA2-PSK and a world of affordable many-core platforms - Google Project Hosting
This code is distributed under the GNU General Public License v3+

Running benchmark (9574.5 PMKs/s)... |

Computed 9574.50 PMKs/s total.
#1: 'CUDA-Device #1 'GeForce GTX 460M'': 8440.1 PMKs/s (RTT 2.8)
#2: 'CPU-Core (SSE2)': 376.5 PMKs/s (RTT 3.1)
#3: 'CPU-Core (SSE2)': 185.4 PMKs/s (RTT 4.1)
#4: 'CPU-Core (SSE2)': 455.4 PMKs/s (RTT 2.9)
#5: 'CPU-Core (SSE2)': 385.1 PMKs/s (RTT 3.1)
#6: 'CPU-Core (SSE2)': 373.8 PMKs/s (RTT 3.0)
#7: 'CPU-Core (SSE2)': 195.2 PMKs/s (RTT 3.6)
#8: 'CPU-Core (SSE2)': 376.0 PMKs/s (RTT 3.1)
#9: 'Network-Clients': 0.0 PMKs/s (RTT 0.0)

[IT_Chip]

i'm not so sure that this is correct.... i'm having the same issue. i have seen other outputs that show all the cores.... and with the card that i have i'm not seeing the performance that i would expect.
this is the benchmark from another thread.

root@bt:~# pyrit benchmark
Pyrit 0.4.1-dev (svn r308) (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+

Running benchmark (63787.8 PMKs/s)... \

Computed 63787.82 PMKs/s total.
#1: 'CUDA-Device #1 'GeForce GTX 295: 11558.7 PMKs/s (RTT 3.0)
#2: 'CUDA-Device #2 'GeForce GTX 295: 10912.5 PMKs/s (RTT 2.9)
#3: 'CUDA-Device #3 'GeForce GTX 295: 10632.1 PMKs/s (RTT 3.0)
#4: 'CUDA-Device #4 'GeForce GTX 295: 11654.7 PMKs/s (RTT 2.9)
#5: 'CUDA-Device #5 'GeForce GTX 295: 10868.9 PMKs/s (RTT 2.9)
#6: 'CUDA-Device #6 'GeForce GTX 295: 10322.8 PMKs/s (RTT 3.0)
#7: 'CPU-Core (SSE2)': 500.7 PMKs/s (RTT 2.7)
#8: 'CPU-Core (SSE2)': 508.9 PMKs/s (RTT 2.8)

[samiux]

I use cpyrit install from the source
and this is my benchmark

Computed 1167.99 PMKs/s total.
#1: 'CUDA-Device #1 'Quadro NVS 160M'': 469.6 PMKs/s (RTT 2.9)
#2: 'CPU-Core (SSE2)': 450.5 PMKs/s (RTT 2.7)

is this output is correct
because in my gpu , I have 8 core but from this benchmark
it tell me that i have only one core?

The pyrit is reported one CUDA device as you have one nVidia display card and pyrit will not report for the total number of CUDA core.

Your display card comes with 8 CUDA cores and her performance under pyrit is around 1167 PMKs/s.

I have 2 nVidia GeForce GTX590 which comes with 1024 CUDA cores per card (that is a total of 2048 CUDA cores) and her performance under pyrit is around 100000 PMKs/s.

So that, you will note that the performance of CUDA device is based on the number of CUDA cores.

Samiux