Results 1 to 10 of 10

Thread: Installing and cracking WPA with pyrit

  1. #1
    Just burned his ISO
    Join Date
    May 2011
    Posts
    7

    Default Installing and cracking WPA with pyrit

    Hey all,

    After the ssh video I decided to record the next one, these were initially just for my reference as I'm pretty forgetful, however g0tmi1k suggested I should publish them.

    So first of all I looked at how to set-up/install pyrit, it has been covered in the How to section and this is where I got the commands from.
    However I still recorded a video for it here:
    Installing pyrit in bt5 Blip.tv

    Blog post here:
    j2neon.blogspot: Installing pyrit into BT5

    There is other links on the bottom of the blog post for those who don't like blip.

    Once pyrit was set-up and had been benchmarked, I looked at cracking WPA.

    This is the same as cracking WPA with any other program!

    Firstly it has to be your own router or you must have permission from the administrator.
    Secondly the key that your cracking has to be inside the list or dictionary file.
    If the password isn't in the dictionary file, the key will not be cracked.
    Note that 'insecurepass' is different to 'Insecsurepass'.
    Finally their access point has to have a client connected because during the process of capturing a handshake, the client is de-authenticated allowing the handshake to be recaptured.

    Commands for using aircrack and pyrit:

    airmon-ng
    airmon-ng start wlan0
    airodump-ng mon0
    airodump-ng -c 11 -w output --bssid mon0
    aireplay --deauth 0 -a bssid -c client mon

    pyrit eval
    pyrit -i pass.lst import_passwords
    pyrit -e j2neonAP create_essid
    pyrit eval
    pyrit batch
    pyrit verify
    pyrit -o wpadb export_hashdb

    aircrack -r wpadb output01.cap

    Video Link:
    Cracking WPA using pyrit/aircrack Blip.tv

    Blogpost:
    j2neon.blogspot: Cracking WPA using pyrit and aircrack

    Once again extra links on blog post

    I know there are many ways of doing this and I know that I only used a low number of passwords in the list but this is just to give people an intro to using pyrit and what it can do!
    Any suggestions and tips will be greatly appreciated.

    Cheers
    2neon



  2. #2
    Just burned his ISO
    Join Date
    Jun 2011
    Posts
    6

    Default Re: Installing and cracking WPA with pyrit

    seems Helpful Im checking this out
    thanks

  3. #3
    Just burned his ISO
    Join Date
    Mar 2011
    Posts
    2

    Default Re: Installing and cracking WPA with pyrit

    may i know where u get the dictionary files?

  4. #4
    Just burned his ISO
    Join Date
    May 2011
    Posts
    7

    Default Re: Installing and cracking WPA with pyrit

    I assume by this you mean the dictionary for cracking WPA, Google will bring up a fair few hits, but I know g0tmi1k did some serious dictionary work here:
    g0tmi1k: Dictionaries & Wordlists

    Cheers
    2neon

  5. #5
    Just burned his ISO
    Join Date
    Jul 2011
    Posts
    1

    Red face Re: Installing and cracking WPA with pyrit

    i had a problem with the interface it doesnt shoes my devices and i dont know why could u help me out ill appriciate if u do

  6. #6
    Just burned his ISO
    Join Date
    May 2011
    Posts
    7

    Default Re: Installing and cracking WPA with pyrit

    Could really do with a little more information, which device isn't being shown, which devices do you have? What are you running VBox, full install or live?

    Cheers
    2neon

  7. #7
    Just burned his ISO DashingDave's Avatar
    Join Date
    Dec 2010
    Location
    UAE - Dubai
    Posts
    3

    Default Re: Installing and cracking WPA with pyrit

    Hey Buddy Really Thanks For This 1
    I'll Also Try This 1(DEFINITELY ON MY OWN NETWORK) :-)

  8. #8
    Just burned his ISO
    Join Date
    Jun 2007
    Posts
    3

    Default Re: Installing and cracking WPA with pyrit

    Thank for share.

    I think it's ready difficult to hack WPA with strong password, if you have big dict i think it easy for you

  9. #9
    Just burned his ISO
    Join Date
    Aug 2011
    Location
    Surabaya
    Posts
    4

    Default Re: Installing and cracking WPA with pyrit

    is that only for nvidia cuda? like posted in your blog?

  10. #10
    Just burned his ISO
    Join Date
    May 2011
    Posts
    7

    Default Re: Installing and cracking WPA with pyrit

    Cuda is Nvidia only. Therefore you can only install and run cuda pyrit. However amd/ati have their own version which is in the same folder in the install package. However as I only have an nvidia card I'm not that much help. I know there are topics on here to get pyrit on ATi

    Hope that helps

Similar Threads

  1. Help installing pyrit
    By peg1987 in forum BackTrack 5 Beginners Section
    Replies: 6
    Last Post: 11-03-2011, 05:14 PM
  2. Replies: 0
    Last Post: 12-30-2010, 12:00 PM
  3. pyrit use only gpu
    By lizdainis in forum Beginners Forum
    Replies: 2
    Last Post: 08-03-2010, 08:44 PM
  4. Pyrit on LAN
    By blingblouw in forum OLD Newbie Area
    Replies: 2
    Last Post: 09-04-2009, 11:09 PM
  5. installing modules vs installing in general.
    By imported_seven in forum OLD Newbie Area
    Replies: 12
    Last Post: 05-20-2007, 06:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •