Try kismet wlan0
kismet ALFA
kismet rt8180
sometimes one of those will work
KISNET - I cant get it to work!
After editing the file, to
source=rt8180,wlan0,ALFA
I run it again! this is what happens, (all I type in is kismet)
bt / # kismet
Server options: none
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ALFA): Enabling monitor mode for rt8180 source interface wlan0 channel
6...
Starting UI...
NOTICE: configdir '/root/.kismet/' does not exist, making it.
NOTICE: Group file did not exist, it will be created.
FATAL: Could not connect to localhost:2501.
Kismet exited.
bt / # Source 0 (ALFA): Opening rt8180 source interface wlan0...
Allowing clients to fetch WEP keys.
SSID cloak file did not exist, it will be created.
IP track file did not exist, it will be created.
Logging networks to Kismet-Jun-08-2007-1.network
Logging networks in CSV format to Kismet-Jun-08-2007-1.csv
Logging networks in XML format to Kismet-Jun-08-2007-1.xml
Logging cryptographically weak packets to Kismet-Jun-08-2007-1.weak
Logging cisco product information to Kismet-Jun-08-2007-1.cisco
Logging gps coordinates to Kismet-Jun-08-2007-1.gps
Logging data to Kismet-Jun-08-2007-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Using network-classifier based data encryption detection
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2006.04.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Registering requested alerts...
Registering builtin timer events...
Gathering packets...
bt / # Saving data files.
Saving data files.
Saving data files.
then it doesn't do anything else
Can anyone help me?
Try kismet wlan0
kismet ALFA
kismet rt8180
sometimes one of those will work
[CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
[CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
[/B][/SIZE]
[URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
[/CENTER]
Thanks, Xploitz for getting back to me...
When I try that I get....
bt ~ # kismet
Server options: none
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ALFA): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
Starting UI...
NOTICE: configdir '/root/.kismet/' does not exist, making it.
NOTICE: Group file did not exist, it will be created.
FATAL: Could not connect to localhost:2501.
Kismet exited.
bt ~ # kismet wlan0
Server options: wlan0
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ALFA): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
Starting UI...
FATAL: Could not connect to localhost:2501.
Kismet exited.
bt ~ # Source 0 (ALFA): Opening rt8180 source interface wlan0...
Source 0 (ALFA): Opening rt8180 source interface wlan0...
Allowing clients to fetch WEP keys.
SSID cloak file did not exist, it will be created.
IP track file did not exist, it will be created.
Logging networks to Kismet-Jun-08-2007-1.network
Logging networks in CSV format to Kismet-Jun-08-2007-1.csv
Logging networks in XML format to Kismet-Jun-08-2007-1.xml
Logging cryptographically weak packets to Kismet-Jun-08-2007-1.weak
Logging cisco product information to Kismet-Jun-08-2007-1.cisco
Logging gps coordinates to Kismet-Jun-08-2007-1.gps
Logging data to Kismet-Jun-08-2007-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Jun-08-2007-1.network
Logging networks in CSV format to Kismet-Jun-08-2007-1.csv
Logging networks in XML format to Kismet-Jun-08-2007-1.xml
Logging cryptographically weak packets to Kismet-Jun-08-2007-1.weak
Logging cisco product information to Kismet-Jun-08-2007-1.cisco
Logging gps coordinates to Kismet-Jun-08-2007-1.gps
Logging data to Kismet-Jun-08-2007-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Using network-classifier based data encryption detection
Using network-classifier based data encryption detection
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2006.04.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Registering requested alerts...
Registering builtin timer events...
Gathering packets...
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2006.04.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Failed to set up UI server: TcpServer bind() failed: Address already in use
Didn't detect any networks, unlinking network list.
Didn't detect any networks, unlinking CSV network list.
Didn't detect any networks, unlinking XML network list.
Didn't detect any Cisco Discovery Packets, unlinking cisco dump
Didn't capture any packets, unlinking dump file
Didn't see any weak encryption packets, unlinking weak file
WARNING: Sometimes cards don't always come out of monitor mode
cleanly. If your card is not fully working, you may need to
restart or reconfigure it for normal operation.
Kismet exiting.
****I PRESSED CTRL + C *********
bt ~ # kismet rt8180
Server options: rt8180
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ALFA): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
Source 0 (ALFA): Opening rt8180 source interface wlan0...
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Jun-08-2007-2.network
Logging networks in CSV format to Kismet-Jun-08-2007-2.csv
Logging networks in XML format to Kismet-Jun-08-2007-2.xml
Logging cryptographically weak packets to Kismet-Jun-08-2007-2.weak
Logging cisco product information to Kismet-Jun-08-2007-2.cisco
Logging gps coordinates to Kismet-Jun-08-2007-2.gps
Logging data to Kismet-Jun-08-2007-2.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Using network-classifier based data encryption detection
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2006.04.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Failed to set up UI server: TcpServer bind() failed: Address already in use
Didn't detect any networks, unlinking network list.
Didn't detect any networks, unlinking CSV network list.
Didn't detect any networks, unlinking XML network list.
Didn't detect any Cisco Discovery Packets, unlinking cisco dump
Didn't capture any packets, unlinking dump file
Didn't see any weak encryption packets, unlinking weak file
WARNING: Sometimes cards don't always come out of monitor mode
cleanly. If your card is not fully working, you may need to
restart or reconfigure it for normal operation.
Kismet exiting.
****I PRESSED CTRL + C *********
bt ~ # kismet alfa
Server options: alfa
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ALFA): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
Source 0 (ALFA): Opening rt8180 source interface wlan0...
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Jun-08-2007-3.network
Logging networks in CSV format to Kismet-Jun-08-2007-3.csv
Logging networks in XML format to Kismet-Jun-08-2007-3.xml
Logging cryptographically weak packets to Kismet-Jun-08-2007-3.weak
Logging cisco product information to Kismet-Jun-08-2007-3.cisco
Logging gps coordinates to Kismet-Jun-08-2007-3.gps
Logging data to Kismet-Jun-08-2007-3.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/local/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/local/etc/client_manuf
Using network-classifier based data encryption detection
Dump file format: wiretap (local code) dump
Crypt file format: airsnort (weak packet) dump
Kismet 2006.04.R1 (Kismet)
Logging data networks CSV XML weak cisco gps
GPSD cannot connect: Connection refused
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Failed to set up UI server: TcpServer bind() failed: Address already in use
Didn't detect any networks, unlinking network list.
Didn't detect any networks, unlinking CSV network list.
Didn't detect any networks, unlinking XML network list.
Didn't detect any Cisco Discovery Packets, unlinking cisco dump
Didn't capture any packets, unlinking dump file
Didn't see any weak encryption packets, unlinking weak file
WARNING: Sometimes cards don't always come out of monitor mode
cleanly. If your card is not fully working, you may need to
restart or reconfigure it for normal operation.
Kismet exiting.
****HANGS HERE*****
It just does't wanna work for me
Running on LiveCD (happens from boot AND also in VMware player)
Using :AFLA USB AW.....
Any ideas lads?
Saying thanks now!
-Some1
Just humor me by rebooting your laptop...editing your kismet.conf file by adding wlan0, ALFA,and rt8180 to the sources..save your changes!!! Then try typing in kismet wlan0
****EDIT****
Sometimes you have to take out your card and put it back in as well then try the next one. (wlan0 or ALFA or rt8180)
****EDIT****
Now that I look at your output again..it looks like its not picking up any APS! Try my above..and if still unsuccessful ...pop out your card and put it back in..and try to put your card in monitor mode with the airmon-ng wlan0 command..then try kismet wlan0
[CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
[CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
[/B][/SIZE]
[URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
[/CENTER]
But the looks of your out put Kismet is not finding any Aps to "connect with
Originally Posted by Xploitz
Deja vu??
[CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
[CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
[/B][/SIZE]
[URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
[/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]
[URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
[/CENTER]
I just updated the ALFA drivers, and now its working
I feel like a fool, sorry for wasting your time, and spamming the forum
It's not spam if someone else can read the thread and learn from what you did or didn't do.
"\x74\x68\x65\x70\x72\x65\x7a\x39\x38";
Sorry bro. I was kinda moving SLOOOOOOOOOOOWWWWWWWW yesterday.Deja vu??
Posting Permissions