[HOW-TO] BT5 Automatically: Login / Startx

[Deadboy]

Firstly, I know this is a "How-To" and not a fix but when I tried to start a thread in the "How-To's" section it said I have insufficient privileges, so mods feel free to move this thread if you like.

So, I'll just start with a disclaimer to avoid numerous reply's by saying, Auto logging in as root is not advisable. Do this at your own risk.


UPDATE: YoMoZ's post describes the simplest way to auto log-in & startx...

just add this line : su -c root startx 
in /etc/rc.local
save and reboot your system

OR

Install rungetty...

apt-get install rungetty

Then, in a terminal type:

nano /etc/init/tty1.conf

use the arrow keys to move down to the last line and add a " # " before the line "exec /sbin/getty -8 38400 tty1" ...then copy and paste the following line below it:

exec /sbin/rungetty tty1 --autologin root

Once that's done, press Ctrl+O and Enter to save

Next run the following command:

nano /root/.bash_profile

and type "startx" then press Ctrl+O and Enter to save.

That's it. Reboot!

[T4c1tly]

This worked for me.
Thanks!

[YoMoZ]

you don't need to install anything....
just add this line : su -c root startx
in /etc/rc.local
save and reboot your system

[Deadboy]

you don't need to install anything....
just add this line : su -c root startx
in /etc/rc.local
save and reboot your system

Good to know. I'll include this in my original post.

[leg3nd]

Just wanted to give an example here, While YoMoZ's is easier to implement, it did not work on my system as I run as a seperate, non unique root user and disabled the normal root account. Mainly because the particular box has SSH exposed to the internet and obviously its much better to not login with 'root'.

In this case the rungetty worked, while the other did not. Thanks for the tutorial.

EDIT: Keep in mind, if you ssh into the box with these settings it will startx as well... If you Ctrl+C it should stop the process, but probably good to know.

[sostentado]

thanks!!! worked for me too...

[Lagator]

I tried both of these methods and couldn't get either to work. After trying the second one I am unable to boot all the way. It gets stuck just before where I would usually type in my user name and password (root and toor). I eventually just reinstalled Backtrack but now I'm back to square one. I'm trying very hard to make backtrack usable as a permanent OS for my netbook but It's the small problums like this that shoot my hopes and dreams down. thoughts appreciated.

[fossilk1]

Is there a way to just auto startx but not force the login, but imply KDM login gfx?? Been a while lol

[shadowzero]

Is there a way to just auto startx but not force the login, but imply KDM login gfx?? Been a while lol

Try looking in the How-To forum.

[WildEndeavor]

I tried both of these methods and couldn't get either to work. After trying the second one I am unable to boot all the way. It gets stuck just before where I would usually type in my user name and password (root and toor). I eventually just reinstalled Backtrack but now I'm back to square one. I'm trying very hard to make backtrack usable as a permanent OS for my netbook but It's the small problums like this that shoot my hopes and dreams down. thoughts appreciated.

I had similar issues with Matriux-Krypton. So assuming Matriux is basically a copy of BT5 I went to the latest Virtual Box with extensions. On my OSX machine Linux running on the Virtual Box requires PATIENCE. My copy of BT5 presented me with problems like those described in these threads. I tried the "fixes", but REMEMBERED while doing so, to S L O W down. I installed BT5 on the VB with a 26GB VHD, and 2626MB RAM, tried a bunch of login with failures, and went outside for a coffee. Came back and BT5 corrected itself, took the startx/toor, and its been jamming since. Happy Hunting!

BT5-Gnome-32!