Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 53

Thread: Wireless: Alfa AWUS051NH

  1. #41
    Just burned his ISO
    Join Date
    Aug 2011
    Posts
    7

    Default Re: Wireless: Alfa AWUS051NH

    I've been testing on the 5Ghz range, currently iwlist wlan0 channel only allows (EU):

    Channels 1-14 (2.4Ghz)
    36-48 (5.18Ghz - 5.24Ghz)
    149-165 (5.745Ghz - 5.825Ghz) - These are not allowed in EU!

    It should be capable of the following (http://www.alfa.com.tw/in/front/bin/...egory=105483):
    5.150-5.350 (Channels 34-64)
    5.470-5.850 (Channels 100-165)

    These are dependent upon country but channels 48-116, 132-140 should be available to Europe and America but are not showing up with current drivers. They have some restriction to do with dynamic frequency seleciton and tranmission power control between 52-140 but I'm not sure if thats why they aren't being picked up by drivers.

    In Windows 7 it detects up to channel 64. Fails to see 100,116,136 (the highest my router will go to).

  2. #42
    Just burned his ISO
    Join Date
    Aug 2011
    Posts
    7

    Default Re: Wireless: Alfa AWUS051NH

    aha, playing around with 'iw list' and 'iw set reg' to set country code has got injection working on 13, and has uncovered the other 5Ghz channels. No luck injecting on the 5Ghz range yet...

  3. #43
    Just burned his ISO
    Join Date
    Mar 2012
    Posts
    1

    Default Re: Wireless: Alfa AWUS051NH

    Hi,
    I would buy this card but I'm a little confused surfing the web: many people say that it dosn't work...
    Does this card works in monitor e injection mode in a Virtual Machine? Or is it required many custom settings to use it?

    Thanks

  4. #44
    Junior Member
    Join Date
    Dec 2011
    Posts
    30

    Default Riferimento: Re: Wireless: Alfa AWUS051NH

    Quote Originally Posted by gnomix View Post
    Hi,
    I would buy this card but I'm a little confused surfing the web: many people say that it dosn't work...
    Does this card works in monitor e injection mode in a Virtual Machine? Or is it required many custom settings to use it?

    Thanks

    i'm interested in the card too...right now i'm using the embedded intel 5100 in my laptop and it works quite good, but there are some routers i can't fake auth to (and no chopchop attack too). so my question is: can alfa auth-fake auth-chopchop and everything else on any router? or is there a limited compatibility for this too?

  5. #45
    Just burned his ISO
    Join Date
    Jun 2012
    Posts
    4

    Lightbulb Installation HowTo - Alfa AWUS051NH - Installation RT2870 tutorial

    Hi, I'm new here, but I'd like to share my experiences with installing the Alfa AWUS051NH USB Stick on Backtrack 5 R2. This is a tutorial which can be used for installation of any RT2870 based USB Wifi device.
    I can't open a thread in the HOWTO Forum, so I'll post it here. This is basically this tutorial: http://www.cyberciti.biz/tips/linux-...s-adapter.html, but I added some things (1.8) or made some changes (2.0) for better understanding or for avoiding problems.
    By the way: If you are a root user on Backtrack (default), you don't have to use "sudo". (That should be clear)

    Tools: I always have used gedit instead of vi for editing files. You can use what you are more familiar with.

    1. driver installation:

    1.1. deactivate default driver:
    in file /etc/modprobe.d/blacklist.conf add the lines:
    Code:
    # for deactivating default drivers of RT2870
    blacklist rt2800usb
    blacklist rt2x00lib
    blacklist rt2x00usb
    Save and close the file.

    1.2 if you have it: remove current driver
    $ sudo modprobe -r rt2800usb
    OR simply reboot the systems:
    $ sudo reboot

    1.3 Install Compilers

    Genrally good: edit the file sources in /etc/apt and add the following line
    deb http://updates.repository.backtrack-linux.org revolution main microverse non-free testing
    Do a apt-get update and apt-get upgrade.

    Then type the following command to install required packages so that you can compile source code:
    $ sudo apt-get install build-essential fakeroot dpkg-dev
    Finally, install Linux kernel headers so that you can compile kernel device drivers:
    $ sudo apt-get install linux-headers-$(uname -r)


    1.4. Download Driver, extract + edit:
    Visit this page: http://www.ralinktech.com/en/04_supp...ort.php?sn=501 and download current driver RT2870USB(RT2870/RT2770)

    extract your downloaded file. (In my case: 051NH_Linux_STA_v2.4.0.1.tar.bz2)

    For Linux kernel 2.6.35 and later: (e.g. Backtrack 5 R2 and newer)
    Open file include/os/rt_linux.h and replace
    usb_buffer_alloc with usb_alloc_coherent
    usb_buffer_free with usb_free_coherent
    (do NOT replace rausb_buffer_alloc or rausb_buffer_free).
    (Source http://www.linuxcrew.de/blog/2010/10...10-10/?lang=en). Save.

    1.5. Compile RT2870 Wireless Lan Linux Driver

    First, edit config.mk file as follows so that Network Manager can be used to set WPA2 auth info:
    $ vi os/linux/config.mk
    Set it as follows:
    Code:
    # Support Wpa_Supplicant
    HAS_WPA_SUPPLICANT=y
    # Support Native WpaSupplicant for Network Manger
    HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
    Save and close the file. To compile the driver, enter:
    $ make

    Note: You may see a LOTs of warnings during the compilation, and this is *normal* so don't panic.

    1.6. Install Driver

    Type the following command:
    $ sudo make install

    1.7 Update Network interfaces list:
    edit file /etc/network/interfaces and add the following lines

    Code:
    auto ra0
    iface ra0 inet dhcp
    1.8 Load the driver on startup:
    edit the file /ect/modules and add the following line
    rt2870sta
    Save.

    (1.9. Download Firmware (see http://www.cyberciti.biz/tips/linux-...s-adapter.html) - not tested yet)


    2. driver configuration:
    You need to edit /etc/Wireless/RT2870STA/RT2870STA.dat file
    Check out: https://wiki.archlinux.org/index.php..._Configuration
    For: Germany, WEP encryption, open authen., key 1 used (hex), wirelessmode=legacy 11b/g mixed:

    Code:
    #The word of "Default" must not be removed
    Default
    CountryRegion=1
    CountryRegionABand=1
    CountryCode=DE
    ChannelGeography=1
    SSID=ENTERROUTERSSIDHERE
    NetworkType=Infra
    WirelessMode=0
    Channel=ENTERCHANNELNUMBERHERE
    BeaconPeriod=100
    TxPower=100
    BGProtection=0
    TxPreamble=0
    RTSThreshold=2347
    FragThreshold=2346
    TxBurst=0
    PktAggregate=0
    WmmCapable=1
    AckPolicy=0;0;0;0
    AuthMode=OPEN
    EncrypType=WEP
    WPAPSK=
    DefaultKeyID=1
    Key1Type=0
    Key1Str=ENTERYOURKEYHERE
    Key2Type=0
    Key2Str=
    Key3Type=0
    Key3Str=
    Key4Type=0
    Key4Str=
    PSMode=CAM
    AutoRoaming=0
    RoamThreshold=70
    APSDCapable=0
    APSDAC=0;0;0;0
    HT_RDG=1
    HT_EXTCHA=0
    HT_OpMode=0
    HT_MpduDensity=4
    HT_BW=1
    HT_BADecline=0
    HT_AutoBA=1
    HT_AMSDU=0
    HT_BAWinSize=64
    HT_GI=1
    HT_MCS=33
    HT_MIMOPSMode=3
    HT_DisallowTKIP=0
    IEEE80211H=0
    TGnWifiTest=0
    WirelessEvent=0
    CarrierDetect=0
    AntDiversity=0
    BeaconLostTime=4
    Be careful with the Wireless Mode!
    WirelessMode=10 (802.11a,g,n) can't connect to 802.11b,g Routers. So use WirelessMode=0 (802.11b,g) then instead.
    By setting the correct WirelessMode, you will avoid the following annoying problem later when connecting with dhclient:

    Code:
    root@bt:~# dhclient ra0
    There is already a pid file /var/run/dhclient.pid with pid 3491
    killed old client process, removed PID file
    Internet Systems Consortium DHCP Client V3.1.3
    Copyright 2004-2009 Internet Systems Consortium.
    All rights reserved.
    For info, please visit https://www.isc.org/software/dhcp/
    
    Listening on LPF/ra0/ROUTERBSSID
    Sending on   LPF/ra0/ROUTERSSID
    Sending on   Socket/fallback
    DHCPREQUEST of 192.168.0.6 on ra0 to 255.255.255.255 port 67
    DHCPREQUEST of 192.168.0.6 on ra0 to 255.255.255.255 port 67
    DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7
    DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 11
    DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 21
    DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 18
    DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 4
    No DHCPOFFERS received.
    Trying recorded lease 192.168.0.6
    PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
    
    --- 192.168.0.1 ping statistics ---
    1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
    
    No working leases in persistent database - sleeping.
    3. Reboot system to load the driver.

    4. Connecting to a network

    4.1 (You connecting with the wict network manager. It doesn't work for me.) If wict can't connect, do the following instead:

    Code:
    ifconfig ra0 down
    ifconfig ra0 up
    iwconfig ra0 essid "YOURROUTER ESSID" key YOURKEYHERE enc on
    dhclient ra0
    5. Enjoy.

    I don't know if its necessary to know: I use BT not in a VM. I run it on a notebook which (of course) has another WLAN chip that runs as wlan0.

  6. #46
    Just burned his ISO
    Join Date
    Aug 2011
    Posts
    7

    Default Re: Installation HowTo - Alfa AWUS051NH - Installation RT2870 tutorial

    Quote Originally Posted by cyril12 View Post

    Lots of faff.
    Didn't it work out of the box? Has been pretty good for me with default drivers, what does changing them bring?

  7. #47
    Senior Member
    Join Date
    Feb 2012
    Location
    Cyberspace
    Posts
    174

    Default Re: Installation HowTo - Alfa AWUS051NH - Installation RT2870 tutorial

    Quote Originally Posted by meatballs View Post
    Didn't it work out of the box? Has been pretty good for me with default drivers, what does changing them bring?
    Same here..seems to work out of the box except injection seems to be erratic.. here is my take:

    Hi, just thought I share my experience with Blueway BT-N9200 9dBi High-Gain B/G/N Wireless USB Adapter which has got exactly the same chip as in ALFAAWUS036NH card. It seems to work very well with my BT5 R2 64bit Gnome. I am using Backtrack from my HDD and not Virtual Machine. Please see the output as I run through air-crack-ng command suites.

    Note my USB card is wlan1

    Code:
    root@bt:~# uname -a
    Linux bt 3.2.6 #1 SMP Fri Feb 17 10:34:20 EST 2012 x86_64 GNU/Linux
    
    root@bt:~# lsusb
    ------snip---------
    Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
    ------snip---------
    
    
    root@bt:~# ifconfig
    ----snip-----
    wlan1     Link encap:Ethernet  HWaddr 00:0d:a3:10:97:e2  
              inet addr:192.168.1.12  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::20d:a3ff:fe10:97e2/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:543301 errors:0 dropped:0 overruns:0 frame:0
              TX packets:280946 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:764439964 (764.4 MB)  TX bytes:26757486 (26.7 MB)
    
    root@bt:~# ifconfig wlan1 down
    root@bt:~# iw reg set BO
    root@bt:~# iwconfig wlan1 txpower 30
    root@bt:~# ifconfig wlan1 up
    root@bt:~# iwconfig wlan1
    wlan1     IEEE 802.11bgn  ESSID:off/any  
              Mode:Managed  Frequency:2.452 GHz  Access Point: Not-Associated   
              Tx-Power=30 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:on
    Note the Tx-Power=30 dBm

    Code:
    root@bt:~# airmon-ng start wlan1
    
    
    Found 3 processes that could cause trouble.
    If airodump-ng, aireplay-ng or airtun-ng stops working after
    a short period of time, you may want to kill (some of) them!
    
    PID	Name
    2379	dhclient3
    2599	dhclient3
    5229	dhclient
    Process with PID 2599 (dhclient3) is running on interface wlan0
    
    
    Interface	Chipset		Driver
    
    wlan1		Ralink RT2870/3070	rt2800usb - [phy2]
    				(monitor mode enabled on mon0)
    wlan0		Atheros AR9285	ath9k - [phy0]
    Note that I am using the standard driver with Backtrack (rt2800usb).

    Now let's run some aircrack-ng suite tools.

    Code:
    root@bt:~# airodump-ng mon0
    CH  3 ][ Elapsed: 20 s ][ 2012-06-08 10:57                                         
                                                                                                                         
     BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID                                      
                                                                                                                         
     1A:52:4A:DA:52:5A   -1       12        0    0  11  54   WEP  WEP         rosenburg                               
     00:26:44:29:37:4D   -1        0       68    2 158  -1   WPA              <length:  0>                               
     72:1D:67:A1:F3:9C  -51       22        3    0  11  54e  WPA  TKIP   PSK  labrynth                                
     6A:C7:14:14:7F:0C  -52       15        0    0   9  54e  WPA  TKIP   PSK  simon                                
     00:21:29:0C:65:A8  -68       25        0    0   6  54 . WPA2 CCMP   PSK  <length:  0>                                
     00:24:D2:90:EE:70  -62       14        0    0   6  54   WPA  TKIP   PSK  My Wireless Router                          
     E0:CA:94:97:B5:45  -66       14        0    0   6  54e  WPA  TKIP   PSK  WirelessHome                                
     00:17:9A:12:4B:86  -68        8        0    0   6  54 . WPA  TKIP   PSK  DLINK_WIRELESS                              
     00:24:17:97:57:D3  -72       14        0    0   1  54   WPA2 CCMP   PSK  hiya                               
     C0:83:0A:4F:A1:59  -76       13        0    0  13  54 . WPA  TKIP   PSK  random                                    
     72:C0:6F:6A:52:74  -77        8        0    0   3  54e  WPA  TKIP   PSK  penrith                                
                                                                                                                          
     BSSID              STATION            PWR   Rate    Lost    Frames  Probe                                            
                                                                                                                          
     1A:52:4A:DA:52:5A  00:00:48:DD:EE:AD  -72    0 - 1     39       12                                                   
     00:26:44:29:37:4D  68:A3:C4:BF:B8:70  -56    0 -24    259       84                                                    (not associated)   00:11:D9:24:67:DE  -60    0 - 1      0        7  alaska                                        
     72:1D:67:A1:F3:9C  78:A3:E4:E9:FD:41  -64    2e-18      0       10                                                    6A:C7:14:14:7F:0C  CC:08:E0:1D:9B:B7  -127    0 -36      0        5  simon                                     72:1D:67:A1:F3:9C  78:A3:E4:E9:FD:41  -66    2e-18      0        4                                                   
     E0:CA:94:97:B5:45  70:DE:E2:CA:1F:D1   -1    1e- 0      0        1
    Now injection test. This is where I have seen failure though injection does work.

    Code:
    root@bt:~# aireplay-ng -9 mon0
    11:01:19  Trying broadcast probe requests...
    11:01:21  No Answer...
    11:01:21  Found 2 APs
    
    11:01:21  Trying directed probe requests...
    11:01:21  72:C0:6F:6A:52:74 - channel: 3 - 'penrith'
    11:01:27   0/30:   0%
    
    11:01:27  00:21:29:0C:65:A8 - channel: 6 - ''
    11:01:28  Ping (min/avg/max): 2.650ms/8.545ms/29.472ms Power: -89.30
    11:01:28  30/30: 100%
    
    11:01:28  Injection is working!
    So the question I am asking why do we need to use another driver? What is the benefit please?

  8. #48
    Just burned his ISO
    Join Date
    Jul 2012
    Posts
    1

    Default Re: Wireless: Alfa AWUS051NH

    Hey im using backtrack for a while now and i just bought the alfa AWUS051NH, I run backtrack trough parallels on my mac (that why i bought the alfa AWUS051NH it also works on the newer versions of mac) so i tried to just plug it in and it didnt work! I already tried allot also the tutorial a few post above, so my question is: is it possible to get it working trough parallels or is an other virtual machine better.(also parallels keeps crashing forcing me to restart my whole computer, with al kind of crazy annoying failures) So i prefer another virtualbox but wich will detect the usb? parallels does detect my mouse and an other wireless i own. so why not this one?

    thanks for your time and effort,

    greets

  9. #49
    Just burned his ISO
    Join Date
    Oct 2012
    Posts
    1

    Thumbs up Re: Installation HowTo - Alfa AWUS051NH - Installation RT2870 tutorial

    Quote Originally Posted by hannah View Post
    Same here..seems to work out of the box except injection seems to be erratic.. here is my take:

    Hi, just thought I share my experience with Blueway BT-N9200 9dBi High-Gain B/G/N Wireless USB Adapter which has got exactly the same chip as in ALFAAWUS036NH card. It seems to work very well with my BT5 R2 64bit Gnome. I am using Backtrack from my HDD and not Virtual Machine. Please see the output as I run through air-crack-ng command suites.

    Note my USB card is wlan1

    Code:
    root@bt:~# uname -a
    Linux bt 3.2.6 #1 SMP Fri Feb 17 10:34:20 EST 2012 x86_64 GNU/Linux
    
    root@bt:~# lsusb
    ------snip---------
    Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
    ------snip---------
    
    
    root@bt:~# ifconfig
    ----snip-----
    wlan1     Link encap:Ethernet  HWaddr 00:0d:a3:10:97:e2  
              inet addr:192.168.1.12  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::20d:a3ff:fe10:97e2/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:543301 errors:0 dropped:0 overruns:0 frame:0
              TX packets:280946 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:764439964 (764.4 MB)  TX bytes:26757486 (26.7 MB)
    
    root@bt:~# ifconfig wlan1 down
    root@bt:~# iw reg set BO
    root@bt:~# iwconfig wlan1 txpower 30
    root@bt:~# ifconfig wlan1 up
    root@bt:~# iwconfig wlan1
    wlan1     IEEE 802.11bgn  ESSID:off/any  
              Mode:Managed  Frequency:2.452 GHz  Access Point: Not-Associated   
              Tx-Power=30 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:on
    Note the Tx-Power=30 dBm

    Code:
    root@bt:~# airmon-ng start wlan1
    
    
    Found 3 processes that could cause trouble.
    If airodump-ng, aireplay-ng or airtun-ng stops working after
    a short period of time, you may want to kill (some of) them!
    
    PID	Name
    2379	dhclient3
    2599	dhclient3
    5229	dhclient
    Process with PID 2599 (dhclient3) is running on interface wlan0
    
    
    Interface	Chipset		Driver
    
    wlan1		Ralink RT2870/3070	rt2800usb - [phy2]
    				(monitor mode enabled on mon0)
    wlan0		Atheros AR9285	ath9k - [phy0]
    Note that I am using the standard driver with Backtrack (rt2800usb).

    Now let's run some aircrack-ng suite tools.

    Code:
    root@bt:~# airodump-ng mon0
    CH  3 ][ Elapsed: 20 s ][ 2012-06-08 10:57                                         
                                                                                                                         
     BSSID              PWR  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID                                      
                                                                                                                         
     1A:52:4A:DA:52:5A   -1       12        0    0  11  54   WEP  WEP         rosenburg                               
     00:26:44:29:37:4D   -1        0       68    2 158  -1   WPA              <length:  0>                               
     72:1D:67:A1:F3:9C  -51       22        3    0  11  54e  WPA  TKIP   PSK  labrynth                                
     6A:C7:14:14:7F:0C  -52       15        0    0   9  54e  WPA  TKIP   PSK  simon                                
     00:21:29:0C:65:A8  -68       25        0    0   6  54 . WPA2 CCMP   PSK  <length:  0>                                
     00:24:D2:90:EE:70  -62       14        0    0   6  54   WPA  TKIP   PSK  My Wireless Router                          
     E0:CA:94:97:B5:45  -66       14        0    0   6  54e  WPA  TKIP   PSK  WirelessHome                                
     00:17:9A:12:4B:86  -68        8        0    0   6  54 . WPA  TKIP   PSK  DLINK_WIRELESS                              
     00:24:17:97:57:D3  -72       14        0    0   1  54   WPA2 CCMP   PSK  hiya                               
     C0:83:0A:4F:A1:59  -76       13        0    0  13  54 . WPA  TKIP   PSK  random                                    
     72:C0:6F:6A:52:74  -77        8        0    0   3  54e  WPA  TKIP   PSK  penrith                                
                                                                                                                          
     BSSID              STATION            PWR   Rate    Lost    Frames  Probe                                            
                                                                                                                          
     1A:52:4A:DA:52:5A  00:00:48:DD:EE:AD  -72    0 - 1     39       12                                                   
     00:26:44:29:37:4D  68:A3:C4:BF:B8:70  -56    0 -24    259       84                                                    (not associated)   00:11:D9:24:67:DE  -60    0 - 1      0        7  alaska                                        
     72:1D:67:A1:F3:9C  78:A3:E4:E9:FD:41  -64    2e-18      0       10                                                    6A:C7:14:14:7F:0C  CC:08:E0:1D:9B:B7  -127    0 -36      0        5  simon                                     72:1D:67:A1:F3:9C  78:A3:E4:E9:FD:41  -66    2e-18      0        4                                                   
     E0:CA:94:97:B5:45  70:DE:E2:CA:1F:D1   -1    1e- 0      0        1
    Now injection test. This is where I have seen failure though injection does work.

    Code:
    root@bt:~# aireplay-ng -9 mon0
    11:01:19  Trying broadcast probe requests...
    11:01:21  No Answer...
    11:01:21  Found 2 APs
    
    11:01:21  Trying directed probe requests...
    11:01:21  72:C0:6F:6A:52:74 - channel: 3 - 'penrith'
    11:01:27   0/30:   0%
    
    11:01:27  00:21:29:0C:65:A8 - channel: 6 - ''
    11:01:28  Ping (min/avg/max): 2.650ms/8.545ms/29.472ms Power: -89.30
    11:01:28  30/30: 100%
    
    11:01:28  Injection is working!
    So the question I am asking why do we need to use another driver? What is the benefit please?
    Cornfirming, same here - works out of the box.

  10. #50
    Junior Member
    Join Date
    Jan 2010
    Posts
    30

    Default Re: Wireless: Alfa AWUS051NH

    Quote Originally Posted by piffkush View Post
    why would someone need 5g? whats in 5g?
    At the time I was conducting 802.11 audits requiring that I be able to validate both spectrums. I also needed to be able to scan all channels. Which, as I recall, the 51NH supported. Had to set the appropriate country codes to do it.

    jk

Page 5 of 6 FirstFirst ... 3456 LastLast

Similar Threads

  1. ALFA NETWORKS awus051NH not workong with backtrack 4
    By quickread in forum Beginners Forum
    Replies: 7
    Last Post: 05-10-2011, 06:10 PM
  2. Alfa AWUS051NH works out of the box with BT4 R2
    By DeeSNutz in forum HardWare Compatibility List
    Replies: 3
    Last Post: 05-10-2011, 05:57 PM
  3. Alfa vs Ubiquiti: Best USB / PCI Wireless Device?
    By seanothan in forum Beginners Forum
    Replies: 3
    Last Post: 09-12-2010, 08:38 PM
  4. wireless connection impossible using ALFA AWUS036H
    By imported_Morningstar in forum OLD BackTrack 4 Bugs and Fixes
    Replies: 2
    Last Post: 03-10-2010, 07:31 AM
  5. Alfa AWUS036H can't connect wireless
    By M1TH1K in forum OLD Bt4beta Non-Working Hardware
    Replies: 5
    Last Post: 03-24-2009, 01:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •