BT5 Alfa AWUS036NH

[Net2010]

hey all i just tested today my Alfa AWUS036NH and is not working with bt5
here my test

airmon-ng start wlan0

     Interface Chipset Driver
    wlan0 RaLink RT2870/3070 rt2800usb - [phy0]
    (monitor mode enabled on mon0) 

and when i test the injection i got

    Quote: # airdump-ng -9 mon0
    17:07:20 Trying broadcast probe requests...
    17:07:21 No Answer...
    17:07:22 Found 0 AP 

any help plz thx

[ashio83]

I could be wrong but you could just be too far away from your access point to inject, try moving closer and try again.

[Net2010]

no bro the problem just on bt5 if i use the bt4 r2 is working fine any help else thx

[BoNk3rZz]

might try airodump-ng not airdump-ng just saying

[Net2010]

ty for the replay is just type error on forum for the o of airodump and here the fixe
i used for bt4 r1 and r2 and is working for bt5
PS: i use the old compat-wireless and is working fine and tested with Alfa AWUS036NH and D-Link DWL-G122

RaLink RT2870/3070 rt2800usb
open new konsole
(1)

cd /usr/src/drivers
wget http://wireless.kernel.org/download/...-04-20.tar.bz2
tar jxvf compat-wireless-2010-04-20.tar.bz2
cd compat-wireless-2010-04-20
wget http://patches.aircrack-ng.org/mac80...radiotap.patch
cat mac80211_2.6.32.2-wl_frag+ack_radiotap.patch | patch -p1
make
make install
make unload
modprobe rt2800usb

when all done reboot!
(2)
test the interface :

airmon-ng start wlan0

Interface Chipset Driver
wlan0 RaLink RT2870/3070 rt2800usb - [phy0]
(monitor mode enabled on mon0)

(3)
let see the detected WiFi network
airodump-ng mon0

(4)
test the injection:

aireplay-ng -9 mon0

airdump-ng -9 mon0
14:42:20 Trying broadcast probe requests...
14:42:21 Injection is working!
14:45:22 Found 1 AP

[inverser]

Hey there, I'm trying to get my AWUS036NH working on BT5 too. I followed your instructions very closely but receive this error when patching:

cat mac80211_2.6.32.2-wl_frag+ack_radiotap.patch | patch -p1
patching file include/net/ieee80211_radiotap.h
Hunk #1 FAILED at 240.
1 out of 1 hunk FAILED -- saving rejects to file include/net/ieee80211_radiotap.h.rej
patching file net/mac80211/tx.c
Hunk #1 FAILED at 678.
Hunk #2 FAILED at 974.
Hunk #3 FAILED at 1025.
Hunk #4 FAILED at 1088.
4 out of 4 hunks FAILED -- saving rejects to file net/mac80211/tx.c.rej

I ignored this message and continued with your instructions and was able to get mon0 enabled, but something is definitely wrong because airodump-ng mon0 shows 0 APs.

[pitert]

ty for the replay is just type error on forum for the o of airodump and here the fixe
i used for bt4 r1 and r2 and is working for bt5
PS: i use the old compat-wireless and is working fine and tested with Alfa AWUS036NH and D-Link DWL-G122

RaLink RT2870/3070 rt2800usb
open new konsole
(1)

when all done reboot!
(2)
test the interface :


(3)
let see the detected WiFi network
airodump-ng mon0

(4)
test the injection:

It did not work for me... any other ideas.
I think problems have something to do with /etc/init.d/networking .. because in bt4r2 it is disabled from startup but not in bt5r3

[r083rt]

make[1]: Leaving directory `/usr/src/linux-source-2.6.38'
make: *** [modules] Error 2


are you getting any errors when compliling???

[inverser]

Yeah. Something is very wrong here.

airmon-ng start wlan0


Found 2 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID	Name
709	dhclient3
14665	dhclient3
Process with PID 14665 (dhclient3) is running on interface wlan0


Interface	Chipset		Driver

wlan0		AR9001/9002/9271		usb (monitor mode enabled)

[Net2010]

make[1]: Leaving directory `/usr/src/linux-source-2.6.38'
make: *** [modules] Error 2


are you getting any errors when compliling???

yes the 2 error from the bluetouth hci_whci.o