Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 76

Thread: -=Xploitz=- Modding Tutorial: Airlink AWLC4130 External Antenna

  1. #21
    Junior Member
    Join Date
    Jul 2007
    Posts
    34

    Default

    Quote Originally Posted by PrairieFire View Post
    FabCorp is a good place to look.
    Thanks. I sent them an email with some pictures of Xploitz mod, hopefully they will tell me what exact parts I need so I can do this mod. The card is on it's way

  2. #22
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by beamen View Post
    Thanks. I sent them an email with some pictures of Xploitz mod, hopefully they will tell me what exact parts I need so I can do this mod. The card is on it's way
    Once you get the card post you got it here. I'll go into more detail like...

    1. You NEED an exacto knife to LIGHTLY scrape off the green plastic off the 50 ohm line feed until you get to the copper line underneath that green plastic stuff..

    2. Buy a little itty bitty wire brush..or get some Brillo pad ...so after you scrape that line..you can scrape the copper 50 ohm line to make some grooves in it so your solder will stick to it.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  3. #23
    Junior Member
    Join Date
    Jul 2007
    Posts
    34

    Default

    Quote Originally Posted by -=Xploitz=- View Post
    Once you get the card post you got it here. I'll go into more detail like...

    1. You NEED an exacto knife to LIGHTLY scrape off the green plastic off the 50 ohm line feed until you get to the copper line underneath that green plastic stuff..

    2. Buy a little itty bitty wire brush..or get some Brillo pad ...so after you scrape that line..you can scrape the copper 50 ohm line to make some grooves in it so your solder will stick to it.

    Sure will.

    I got a lot of tools at home so I got all the tools I need at least.

    Can you mark of in paint or some thing were the other antenna is located, and where the ground to the other antenna is? Would be nice to get 2 connectors in it once I have the card open I will just order the part I need x2

  4. #24
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    If you look at post #3...you can literally fold that card in half this way..-------- and its a mirror image of the side I soldered on..you can see the other 50 ohm line right across from where I soldered..just look like an inch or 2 DIRECTLY ABOVE where I soldered..see the other 50 ohm line feed??? see the copper "square" that looks like where I soldered my ground to thats circled in yellow...mirror image of that side.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  5. #25
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    BTW..don;t **** with your card until you talk to me first..I know a trick that will GUARANTEE you EXCELLENT RANGE and optimal reception.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  6. #26
    Junior Member
    Join Date
    Jul 2007
    Posts
    34

    Default

    Quote Originally Posted by -=Xploitz=- View Post
    BTW..don;t **** with your card until you talk to me first..I know a trick that will GUARANTEE you EXCELLENT RANGE and optimal reception.

    COOL! Let's hear it! You can post now, so it's all ready for when it gets here If you want/have time of course.

  7. #27
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    ok, here goes....

    once you open the card and scrape off all that you need...plug your card in very very carefully and fire up airodump in this format...

    airodump-ng -c YOUR-AP-CHANEL-HERE --bssid YOUR-AP-MAC-HERE ath0
    for me it looks like this..

    airodump-ng -c 6 --bssid 00:14:E3:AB:9P:1W ath0

    that will lock onto your ap perfectly...now pay careful attention to your aps power levels....

    take the center line from your SMA connector to the card..and place it on the 50ohm line feed and hold it there with tape, your finger..or wire clamps.....MAKE SURE ALL THE LINE IS FLAT AND PLUSH AGAINST THE 50OHM LINE FEED!!!..now you have grounds all around you on that card..I chose that test spot to solder my ground to...but touch the ground wire from your SMA jack that will be soldered to the card on it..now look at your power levels..play with a spot on it till you get maximum power levels...also you can follow that 50 ohm line feed all the way till where it gets all "curvy" (at the bottom right of the yellow circle in post #3)..scrape all that off..thats dead antenna since you took out that capacitor directly below the test "square"...scrape ALL that feed and you can now use that as your ground as well to get an even better reception..MANY people here will argue that this is a bad idea..that you'll get interference and lower the 50 ohm to 25 ohm..blah, blah, blah...but you can listen to them or me..but I'm telling you right now..I have never had a better reception with any other method or card than I have right now. Now use your ground wire and play with a spot on that feed...you'll eventuall see great power gains. It helps is you get around 10 feet or closer to your AP to really fine tune your wires positions.
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  8. #28
    Junior Member
    Join Date
    Jul 2007
    Posts
    34

    Default

    Cool!

    Thanks for the tip! I'm not sure 100% where the spot is. Would you be up to paintshop and mark in red or something that you have to scrape etc? I don't want to ruin the card.

  9. #29
    Senior Member
    Join Date
    Apr 2007
    Posts
    3,385

    Default

    Quote Originally Posted by beamen View Post
    Cool!

    Thanks for the tip! I'm not sure 100% where the spot is. Would you be up to paintshop and mark in red or something that you have to scrape etc? I don't want to ruin the card.
    no need for paint...see my other post in this thread..solder where I did..lol
    [CENTER][FONT=Book Antiqua][SIZE=5][B][COLOR=blue][FONT=Courier New][COLOR=red]--=[/COLOR][/FONT]Xploitz[FONT=Courier New][COLOR=red]=--[/COLOR][/FONT][/COLOR][/B][/SIZE][/FONT][FONT=Courier New][COLOR=Black][SIZE=6][B] ®[/B][/SIZE][/COLOR][/FONT][/CENTER]
    [CENTER][SIZE=4][B]Remote-Exploit.orgs Master Tutorialist.[/B][/SIZE][SIZE=6][B]™
    [/B][/SIZE]
    [URL="http://forums.remote-exploit.org/showthread.php?t=9063"][B]VIDEO: Volume #1 "E-Z No Client WEP Cracking Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=7872"][B]VIDEO: Volume #2 "E-Z No Client Korek Chopchop Attack Tutorial"[/B]
    [/URL]
    [URL="http://forums.remote-exploit.org/showthread.php?t=8230"][B]VIDEO: Volume #3 "E-Z WPA/WPA2 Cracking Tutorial"[/B][/URL]

    [URL="http://forums.remote-exploit.org/showthread.php?t=8041"][B]VIDEO: Volume #4 "E-Z Cracking WPA/WPA2 With Airolib-ng Databases"[/B][/URL]
    [/CENTER]

  10. #30
    Junior Member
    Join Date
    Jul 2007
    Posts
    34

    Default

    I am going to order, if this is right: Please let me know

    http://www.fab-corp.com/product.php?...1&cat=0&page=1
    http://www.fab-corp.com/product.php?...3&cat=0&page=1
    http://www.fab-corp.com/product.php?...cat=282&page=1


    I asked in an email to them what parts I need to order to do Xploitz mod and these are the items he listed.

    He said that the LMR-100A had a ground around the wire. So I guess I don't need to soldier a line to the ground.

    Does this sound right? Do the parts look correct?

    I got the card dissembled now, and I took of the stickers, and painted the aluminum black - should look nice

Page 3 of 8 FirstFirst 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •