Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: [german] Hilfe mit DWL-G120

  1. #1
    Just burned his ISO
    Join Date
    May 2007
    Posts
    7

    Default help with DWL-G120 and BT 1 Final

    Hi,

    habe den o.g. Adapter er wird mir auch unter Backtrack 1 Final mist lsusb angezeigt.

    Aber es fehlt nen Treiber oder sonst was wäre sehr nett wenn mir da jemand weiter helfen könnte bin so langsam am verzweifeln.

    PS: Die Karte luppt unter Win also is sie net defekt

    greetz
    Viper_2020

  2. #2
    Developer
    Join Date
    Mar 2007
    Posts
    6,124

    Default

    if you could post in english maby we could help

  3. #3
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    surely almost people here are from many countries but we all make the effort of speaking english in order to be cool and precise with others....

    maybe if you are german only speaking maybe here there will be infos
    http://repat.re.ohost.de/aircrack.html

    sorry but german is a weird language for me (im french lol)..............;
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

  4. #4
    Just burned his ISO
    Join Date
    May 2007
    Posts
    7

    Default

    ok sry for my bad english.

    I have dlink DWL-G120.

    I use Backtrack 1 Final.

    If i use lsusb it show me

    slax ~ # lsusb
    Bus 003 Device 001: ID 0000:0000
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 003: ID 126f:1325 TwinMOS Mobile Disk
    Bus 001 Device 002: ID 2001:3701 D-Link Corp. [hex] DWL-G120 Spinnaker 802.11b
    Bus 001 Device 001: ID 0000:0000

    but if i use ifconfig or iwconfig there is no wireless adapter.

    i think there is missing the driver.

    i use backtack as live cd not installed.

    i hope u understand my problem

    ifconfig

    slax ~ # ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:6E:F5:AC:FE
    inet addr:192.168.0.22 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::20c:6eff:fef5:acfe/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:91891 errors:0 dropped:0 overruns:0 frame:0
    TX packets:55033 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:130583623 (124.5 Mb) TX bytes:4595599 (4.3 Mb)
    Interrupt:18 Base address:0xe000

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    iwconfig

    slax ~ # iwconfig
    lo no wireless extensions.

    eth0 no wireless extensions.

    sit0 no wireless extensions.

    At windows the adapter is working.

  5. #5
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final....................
    please upgrade to BT2final..................
    ..


    ftp://swtsrv.informatik.uni-mannheim.de/pub/linux/distributions/BackTrack/bt2final.iso
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

  6. #6
    Just burned his ISO
    Join Date
    May 2007
    Posts
    7

    Default

    i try BT2 Final but if i boot there are a error message and BT2 Final hangs

    look here

    xx://img511.imageshack.us/my.php?image=img1615ve9.jpg

  7. #7
    Senior Member shamanvirtuel's Avatar
    Join Date
    Mar 2010
    Location
    Somewhere in the "Ex" human right country
    Posts
    2,988

    Default

    have u check md5, seems like bt2 iso is corrupted..........
    md5 is available on BT2 main dl site
    Watch your back, your packetz will belong to me soon... xD

    BackTrack :
    Giving Machine Guns to Monkeys since 2006

  8. #8
    Just burned his ISO
    Join Date
    May 2007
    Posts
    7

    Default

    yes i have check md5 and ist all oki.

    any idea ?

    oki now i am online with BT2.

    The Poblem was to burn with Nero

    but the DWL-G120 doesnt work with BT2 Final too

    any idea ?

    lsusb
    Bus 3 Device 3: ID 2001:3701 D-Link Corp. [hex] DWL-G120 Spinnaker 802.11b
    Bus 3 Device 2: ID 126f:1325 TwinMOS Mobile Disk
    Bus 3 Device 1: ID 0000:0000
    Bus 2 Device 1: ID 0000:0000
    Bus 1 Device 1: ID 0000:0000

  9. #9
    Junior Member
    Join Date
    Aug 2006
    Posts
    29

    Default

    Have you tried

    ifconfig -a

    that command shows you all wireless thinigys...

    after you have found your adapter you have to use

    ifconfig adaptername up



  10. #10
    Member imported_blackfoot's Avatar
    Join Date
    Jun 2007
    Posts
    386

    Default prism gt

    According to:

    http://linux-wless.passys.nl/query_p...andname=D-Link

    This seems to be a USB Dlink card with a Prism GT chipset whose probability of success is unknown.

    According to:

    http://aircrack-ng.org/doku.php?id=c...st_card_to_buy

    The Full MAC version may work under Linux.

    Otherwise it appears to be a MS Windows only card.
    Lux sit

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •