Results 1 to 3 of 3

Thread: Help me setup my bcm4312 wireless card to work on bt4

  1. #1
    Just burned his ISO
    Join Date
    Mar 2011
    Posts
    2

    Question Help me setup my bcm4312 wireless card to work on bt4

    hey guys i tried to setup my bcm4312 wireless card for last 5 days but am unsuccessful so guys help me!!

    when i try to compile the driver i got this error

    Code:
    KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
    make[1]: Entering directory `/usr/src/linux-source-2.6.30.9'
    
      WARNING: Symbol version dump /usr/src/linux-source-2.6.30.9/Module.symvers
               is missing; modules will have no dependencies and modversions.
    
      LD      /home/bcm/built-in.o
      CC [M]  /home/bcm/src/shared/linux_osl.o
      CC [M]  /home/bcm/src/wl/sys/wl_linux.o
      CC [M]  /home/bcm/src/wl/sys/wl_iw.o
      LD [M]  /home/bcm/wl.o
    ld: Relocatable linking with relocations from format elf64-x86-64 (/home/bcm/lib/wlc_hybrid.o_shipped) to format elf32-i386 (/home/bcm/wl.o) is not supported
    make[2]: *** [/home/bcm/wl.o] Error 1
    make[1]: *** [_module_/home/bcm] Error 2
    make[1]: Leaving directory `/usr/src/linux-source-2.6.30.9'
    make: *** [all] Error 2
    lshw -class network

    Code:
    *-network
           description: Network controller
           product: BCM4312 802.11b/g
           vendor: Broadcom Corporation
           physical id: 0
           bus info: pci@0000:01:00.0
           version: 01
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress bus_master cap_list
           configuration: driver=b43-pci-bridge latency=0
      *-network DISABLED
           description: Ethernet interface
           product: Atheros AR8132 / L1c Gigabit Ethernet Adapter
           vendor: Attansic Technology Corp.
           physical id: 0
           bus info: pci@0000:03:00.0
           logical name: eth0
           version: c0
           serial: 70:5a:b6:1a:03:86
           capacity: 100MB/s
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
           configuration: autonegotiation=on broadcast=yes driver=ATL1C driverversion=1.0.0.10 firmware=L1e latency=0 link=yes module=atl1e multicast=yes port=twisted pair
    iwconfig
    Code:
    lo        no wireless extensions.
    
    eth0      no wireless extensions.

  2. #2
    Just burned his ISO
    Join Date
    Dec 2010
    Posts
    2

    Default Re: Help me setup my bcm4312 wireless card to work on bt4

    My wireless card in my netbook uses the same driver man. I installed arch linux on it a few days ago but couldn't get the wireless working i haven't really had a big play around with it but after reading a few threads I might just not bother with it and just use a USB Alfa wifi card.

  3. #3
    Just burned his ISO
    Join Date
    Mar 2011
    Posts
    2

    Default Re: Help me setup my bcm4312 wireless card to work on bt4

    Guys help pls!!

Similar Threads

  1. bcm4312 card not working
    By wiill in forum Beginners Forum
    Replies: 3
    Last Post: 05-14-2010, 05:07 PM
  2. Best Wireless Card & Antenna setup?
    By Conan in forum OLD Newbie Area
    Replies: 7
    Last Post: 06-14-2009, 01:46 AM
  3. HELP getting my wg511v2 wireless card to work
    By n0name in forum OLD BackTrack v2.0 Final
    Replies: 2
    Last Post: 06-02-2007, 11:08 PM
  4. TRENDnet Wireless Card Setup
    By Trikk in forum OLD Newbie Area
    Replies: 0
    Last Post: 04-25-2007, 03:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •