I recently had posted because I accidently installed Linux BT over my Windows 7 part.... ouch. I decided to forget the lost files, and move on with my life. So, I shrunk the partition BT used, rebooted to make sure it still booted fine, and it did. Then I installed Win 7 on the non BT part. Now Win 7 boots and I don't get the option to boot BT. When I had just BT on my system, uppon boot I got the message 'Press esc for boot options' or something of the like, not anymore. Here is my fdisk -l:


Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x678b1560

Device Boot Start End Blocks Id System
/dev/sda1 1 13132 105482758+ 83 Linux
/dev/sda2 * 13133 13145 102400 7 HPFS/NTFS
/dev/sda3 13145 37804 198074368 7 HPFS/NTFS
/dev/sda4 37805 38913 8908042+ 15 Unknown

Disk /dev/sdb: 4013 MB, 4013948928 bytes
25 heads, 24 sectors/track, 13066 cylinders
Units = cylinders of 600 * 512 = 307200 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdb1 * 14 13067 3915776 b W95 FAT32

Disk /dev/sdc: 4022 MB, 4022337024 bytes
255 heads, 63 sectors/track, 489 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdc1 * 1 490 3927936 c W95 FAT32 (LBA)
Partition 1 has different physical/logical endings:
phys=(488, 254, 63) logical=(489, 3, 26)


Obviously my BTpart is still intact, but uppon boot Grub doesnt even start. How do I get my dual boot on from this point? Any help would be greatly appreciated, I'm about at the point of moving on to my next project... flying laptops.