Results 1 to 2 of 2

Thread: BT4 Ettercap-ng modified error

  1. #1
    Just burned his ISO
    Join Date
    Nov 2010
    Posts
    4

    Default BT4 Ettercap-ng modified error

    I have modified Ettercap-ng so that I can view https, however after having saved nano/etc/etter.conf and try to start Ettercap-ng with Konsole I get an Parse error etter.conf line 34.
    Can somebody pinpoint any errors on this script.

    ################################################## #########################
    # #
    # ettercap -- etter.conf -- configuration file #
    # #
    # Copyright (C) ALoR & NaGA #
    # #
    # This program is free software; you can redistribute it and/or modify
    # # it under the terms of the GNU General Public License as published
    # by # the Free Software Foundation; either version 2 of the License,
    # or # (at your option) any later version. #
    # #
    # $Id: etter.conf,v 1.78 2004/10/12 15:28:38 alor Exp $ #
    # #
    ################################################## ##########################

    [privs] ec_uid = 0 # nobody is the default
    ec_gid = 0 # nobody is the default

    [mitm] arp_storm_delay = 10 # milliseconds arp_poison_warm_up = 1 # seconds
    arp_poison_delay = 10 # seconds arp_poison_icmp = 1 # boolean
    arp_poison_reply = 1 # boolean arp_poison_request = 0 # boolean
    arp_poison_equal_mac = 1 # boolean dhcp_lease_time = 1800 # seconds
    port_steal_delay = 10 # milliseconds port_steal_send_delay = 2000 # microseconds

    [connections] connection_timeout = 300 # seconds connection_idle = 5 # seconds
    connection_buffer = 10000 # bytes connect_timeout = 5 # seconds

    [stats] sampling_rate = 50 # number of packets

    [misc]
    close_on_eof = 1 # boolean value store_profiles = 1 # 0 = disabled; 1 = all; 2 $
    # boolean value skip_forwarded_pcks = 1 # boolean value checksum_check = 0
    # boolean value checksum_warning = 0 # boolean value (valid only if
    checksum_check is 1)

    ################################################## ##########################
    #
    # You can specify what DISSECTORS are to be enabled or not...
    #
    # e.g.: ftp = 21 enabled on port 21 (tcp is implicit)
    # ftp = 2345 enabled on non standard port ftp = 21,453 enabled
    # on port 21 and 453 ftp = 0 disabled
    #
    # NOTE: some dissectors have multiple default ports, if you specify a
    # new
    # one, all the default ports will be overwritten

    #dissector default port

    [dissectors] ftp = 21 # tcp 21 ssh = 22 # tcp 22 telnet = 23 # tcp 23
    smtp = 25 # tcp 25 dns = 53 # udp 53 dhcp = 67 # udp 68 http = 80 # tcp
    80 ospf = 89 # ip 89 (IPPROTO 0x59) pop3 = 110 # tcp 110
    #portmap = 111 # tcp / udp
    vrrp = 112 # ip 112 (IPPROTO 0x70) nntp = 119 # tcp 119 smb = 139,445 #
    tcp 139 445 imap = 143,220 # tcp 143 220 snmp = 161 # udp 161 bgp = 179
    # tcp 179 ldap = 389 # tcp 389 https = 443 # tcp 443 ssmtp = 465 # tcp
    465 rlogin = 512,513 # tcp 512 513 rip = 520 # udp 520 nntps = 563 # tcp
    563 ldaps = 636 # tcp 636 telnets = 992 # tcp 992 imaps = 993 # tcp 993
    ircs = 994 # tcp 993 pop3s = 995 # tcp 995 socks = 1080 # tcp 1080 msn =
    1863 # tcp 1863 cvs = 2401 # tcp 2401 mysql = 3306 # tcp 3306 icq = 5190
    # tcp 5190 ymsg = 5050 # tcp 5050 vnc = 5900,5901,5902,5903 # tcp 5900
    5901 5902 5903 x11 = 6000,6001,6002,6003 # tcp 6000 6001 6002 6003 irc =
    6666,6667,6668,6669 # tcp 6666 6667 6668 6669 napster = 7777,8888 # tcp
    7777 8888 proxy = 8080 # tcp 8080 rcon = 27015,27960 # udp 27015 27960
    ppp = 34827 # special case this is the Net Layer code

    #
    # you can change the colors of the curses GUI. here is a list of values:
    # 0 Black 4 Blue 1 Red 5 Magenta 2 Green 6 Cyan 3 Yellow 7 White
    #
    [curses] color_bg = 0 color_fg = 7 color_join1 = 2 color_join2 = 4
    color_border = 7 color_title = 3 color_focus = 6 color_menu_bg = 4
    color_menu_fg = 6 color_window_bg = 4 color_window_fg = 7
    color_selection_bg = 6 color_selection_fg = 6 color_error_bg = 1
    color_error_fg = 3 color_error_border = 3

    #
    # This section includes all the configurations that needs a string as a
    # parmeter such as the redirect command for SSL mitm attack.
    #
    [strings]

    # the default encoding to be used for the UTF-8 visualization
    utf8_encoding = "ISO-8859-1"

    # the command used by the remote_browser plugin
    remote_browser = "Firefox -remote openurl(http://%host%url)"

    ####################################
    # redir_command_on/off
    #####################################
    # you must provide a valid script for your operating system in order to
    # have the SSL dissection available note that the cleanup script is
    # executed without enough privileges (because they are dropped on
    # startup). so you have to either: provide a setuid program or set the
    # ec_uid to 0, in order to be sure the cleanup script will be executed
    # properly NOTE: this script is executed with an execve(), so you can't
    # use pipes or output redirection as if you were in a shell. We suggest
    # you to make a script if you need those commands.

    #---------------
    # Linux ---------------

    # if you use ipchains:
    #redir_command_on = "ipchains -A input -i %iface -p tcp -s 0/0 -d 0/0
    %port -j REDIRECT %rport"
    #redir_command_off = "ipchains -D input -i %iface -p tcp -s 0/0 -d 0/0
    %port -j REDIRECT %rport"

    # if you use iptables:
    redir_command_on = "iptables -t nat -A PREROUTING -i %iface -p tcp
    --dport %port -j REDIRECT --to-port %rport"
    redir_command_off = "iptables -t nat -D PREROUTING -i %iface -p tcp
    --dport %port -j REDIRECT --to-port %rport

    #---------------
    # Mac Os X ---------------

    # quick and dirty way:
    #redir_command_on = "ipfw add fwd 127.0.0.1,%rport tcp from any to
    #any %port in via %iface" redir_command_off = "ipfw -q flush"

    # a better solution is to use a script that keeps track of the rules
    # interted and then deletes them on exit:

    # redir_command_on: ----- cut here -------
    # #!/bin/sh
    # if [ -a "/tmp/osx_ipfw_rules" ]; then
    # ipfw -q add `head -n 1 osx_ipfw_rules` fwd 127.0.0.1,$1 tcp from
    # any to any $2 in via $3 else
    # ipfw add fwd 127.0.0.1,$1 tcp from any to any $2 in via $3 | cut
    # -d " " -f 1 >> /tmp/osx_ipfw_rules fi ----- cut here -------

    # redir_command_off: ----- cut here -------
    # #!/bin/sh
    # if [ -a "/tmp/osx_ipfw_rules" ]; then
    # ipfw -q delete `head -n 1 /tmp/osx_ipfw_rules` rm -f
    # /tmp/osx_ipfw_rules fi ----- cut here -------


    #---------------
    # Open BSD ---------------

    # unfortunately the pfctl command does not accepts direct rules adding
    # you have to use a script wich executed the following command:

    # ----- cut here -------
    # #!/bin/sh
    # rdr pass on $1 inet proto tcp from any to any port $2 -> localhost
    # port $3 | pfctl -a sslsniff -f - ----- cut here -------

    # it's important to remember that you need "rdr-anchor sslsniff" in your
    # pf.conf in the TRANSLATION section.

    #redir_command_on = "the_script_described_above %iface %port %rport"
    #redir_command_off = "pfctl -a sslsniff -Fn"

    # also, if you create a group called "pfusers" and have EC_GID be that
    # group, you can do something like:
    # chgrp pfusers /dev/pf chmod g+rw /dev/pf such that all users in
    # "pfusers" can run pfctl commands; thus allowing non-root execution of
    # redir commands.


    ##########
    # EOF #
    ##########

    Help much appreciated.
    P.s I am a newbie
    Ta

  2. #2
    Just burned his ISO
    Join Date
    Mar 2008
    Posts
    2

    Default Respuesta: BT4 Ettercap-ng modified error

    Quote Originally Posted by Dayve View Post
    [misc]
    close_on_eof = 1 # boolean value store_profiles = 1 # 0 = disabled; 1 = all; 2 $
    # boolean value skip_forwarded_pcks = 1 # boolean value checksum_check = 0
    # boolean value checksum_warning = 0 # boolean value (valid only if
    checksum_check is 1)
    Hello, your line 34 in etter.conf is in fact part of line 33 :S:S ...
    just coment ur line 34, or delete your line 34 or simply put it in the right place(end ofline 33)

    hope it help :P

Similar Threads

  1. Making an iso of the modified live cd
    By rizler in forum OLD Newbie Area
    Replies: 0
    Last Post: 09-20-2009, 09:46 AM
  2. acer one modified
    By ej2095 in forum OLD BackTrack 4 NON working hardware
    Replies: 1
    Last Post: 07-09-2009, 12:13 AM
  3. SEND L3 ERROR/Ettercap error?
    By sunking in forum OLD Newbie Area
    Replies: 7
    Last Post: 07-01-2009, 10:31 PM
  4. rtl8187b-modified
    By Tampa2pac in forum OLD Newbie Area
    Replies: 0
    Last Post: 08-14-2008, 09:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •