Page 8 of 9 FirstFirst ... 6789 LastLast
Results 71 to 80 of 84

Thread: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

  1. #71
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    >>>up<<<

    i'm waiting answer

  2. #72
    Very good friend of the forum drgr33n's Avatar
    Join Date
    Jan 2010
    Location
    Dark side of the moon ...
    Posts
    699

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    lol @ zakoo Don't demand a response or I think your time here will be short lived Post output of lspci -vv

  3. #73
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    hhhhhhhhhhhhhhhhhhhh
    thx 4 help
    part 1
    Code:
    root@bt:~# lspci -vv
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
            Latency: 0
            Capabilities: [e0] Vendor Specific Information <?>
            Kernel modules: intel-agp
    
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
            I/O behind bridge: 00002000-00002fff
            Memory behind bridge: cfe00000-cfefffff
            Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
            Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
            BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
            Capabilities: [88] Subsystem: Acer Incorporated [ALI] Device 033e
            Capabilities: [80] Power Management version 3
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                    Address: fee0f00c  Data: 4149
            Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                            ExtTag- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                            MaxPayload 128 bytes, MaxReadReq 128 bytes
                    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                    LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
                            ClockPM- Suprise- LLActRep- BwNot+
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
                    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
                            Slot # 11, PowerLimit 75.000000; Interlock- NoCompl+
                    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                            Changed: MRL- PresDet+ LinkState-
                    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                    RootCap: CRSVisible-
                    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
            Capabilities: [100] Virtual Channel <?>
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Interrupt: pin A routed to IRQ 11
            Region 0: Memory at f0604000 (64-bit, non-prefetchable) [size=16]
            Capabilities: [50] Power Management version 3
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                    Address: 0000000000000000  Data: 0000
    
    00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Interrupt: pin A routed to IRQ 16
            Region 0: Memory at f0606000 (32-bit, non-prefetchable) [size=1K]
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [58] Debug port: BAR=1 offset=00a0
            Capabilities: [98] PCIe advanced features <?>
            Kernel driver in use: ehci_hcd

  4. #74
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    part2

    Code:
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Interrupt: pin A routed to IRQ 44
            Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=16K]
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
                    Address: 00000000fee0f00c  Data: 4181
            Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                            ExtTag- RBE- FLReset+
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                            MaxPayload 128 bytes, MaxReadReq 128 bytes
                    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
                            ClockPM- Suprise- LLActRep- BwNot-
                    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
            Capabilities: [100] Virtual Channel <?>
            Capabilities: [130] Root Complex Link <?>
            Kernel driver in use: HDA Intel
            Kernel modules: snd-hda-intel
    
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
            I/O behind bridge: 00003000-00003fff
            Memory behind bridge: f0200000-f02fffff
            Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
            Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
            BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
            Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                            ExtTag- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                            MaxPayload 128 bytes, MaxReadReq 128 bytes
                    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                    LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
                            ClockPM- Suprise- LLActRep+ BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
                            Slot #  0, PowerLimit 10.000000; Interlock- NoCompl+
                    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
                            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                            Changed: MRL- PresDet- LinkState+
                    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                    RootCap: CRSVisible-
                    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
            Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                    Address: fee0f00c  Data: 4151
            Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 033e
            Capabilities: [a0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
            I/O behind bridge: 00004000-00004fff
            Memory behind bridge: f0300000-f03fffff
            Prefetchable memory behind bridge: 00000000bc100000-00000000bc2fffff
            Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
            BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
            Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                            ExtTag- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                            MaxPayload 128 bytes, MaxReadReq 128 bytes
                    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                    LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
                            ClockPM- Suprise- LLActRep+ BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
                            Slot #  1, PowerLimit 10.000000; Interlock- NoCompl+
                    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
                            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                            Changed: MRL- PresDet- LinkState+
                    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                    RootCap: CRSVisible-
                    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
            Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                    Address: fee0f00c  Data: 4159
            Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 033e
            Capabilities: [a0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Kernel driver in use: pcieport
            Kernel modules: shpchp
    
    00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Interrupt: pin A routed to IRQ 23
            Region 0: Memory at f0607000 (32-bit, non-prefetchable) [size=1K]
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [58] Debug port: BAR=1 offset=00a0
            Capabilities: [98] PCIe advanced features <?>
            Kernel driver in use: ehci_hcd
    
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01)
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
            Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
            BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
            Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 033e

  5. #75
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    part3

    Code:
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Capabilities: [e0] Vendor Specific Information <?>
            Kernel modules: iTCO_wdt
    
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
            Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
            Interrupt: pin B routed to IRQ 43
            Region 0: I/O ports at 1830 [size=8]
            Region 1: I/O ports at 1824 [size=4]
            Region 2: I/O ports at 1828 [size=8]
            Region 3: I/O ports at 1820 [size=4]
            Region 4: I/O ports at 1800 [size=32]
            Region 5: Memory at f0608000 (32-bit, non-prefetchable) [size=2K]
            Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
                    Address: fee0f00c  Data: 4169
            Capabilities: [70] Power Management version 3
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [a8] SATA HBA <?>
            Capabilities: [b0] PCIe advanced features <?>
            Kernel driver in use: ahci
    
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Interrupt: pin C routed to IRQ 10
            Region 0: Memory at f0609000 (64-bit, non-prefetchable) [size=256]
            Region 4: I/O ports at 1840 [size=32]
            Kernel modules: i2c-i801
    
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Interrupt: pin C routed to IRQ 10
            Region 0: Memory at f060a000 (64-bit, non-prefetchable) [size=4K]
            Capabilities: [50] Power Management version 3
                    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                    Address: 00000000  Data: 0000
    02:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Interrupt: pin A routed to IRQ 46
            Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
            Region 2: Memory at cfee0000 (64-bit, non-prefetchable) [size=128K]
            Region 4: I/O ports at 2000 [size=256]
            [virtual] Expansion ROM at cfe00000 [disabled] [size=128K]
            Capabilities: [50] Power Management version 3
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                    DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                            MaxPayload 128 bytes, MaxReadReq 512 bytes
                    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                    LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                            ClockPM- Suprise- LLActRep- BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
                    Address: 00000000fee0f00c  Data: 4191
            Capabilities: [100] Vendor Specific Information <?>
            Kernel driver in use: fglrx_pci
            Kernel modules: fglrx
    
    02:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
            Subsystem: Acer Incorporated [ALI] Device 033e
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Interrupt: pin B routed to IRQ 45
            Region 0: Memory at cfedc000 (64-bit, non-prefetchable) [size=16K]
            Capabilities: [50] Power Management version 3
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                    DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                            MaxPayload 128 bytes, MaxReadReq 512 bytes
                    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                    LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                            ClockPM- Suprise- LLActRep- BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
                    Address: 00000000fee0f00c  Data: 4189
            Capabilities: [100] Vendor Specific Information <?>
            Kernel driver in use: HDA Intel
            Kernel modules: snd-hda-intel

  6. #76
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    part4

    Code:
    03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
            Subsystem: Acer Incorporated [ALI] Device 033d
            Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Interrupt: pin A routed to IRQ 16
            Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
            Capabilities: [48] Power Management version 3
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
            Capabilities: [60] Vendor Specific Information <?>
            Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                    Address: b3a953c12b468614  Data: e53d
            Capabilities: [cc] Express (v2) Endpoint, MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                            MaxPayload 128 bytes, MaxReadReq 4096 bytes
                    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
                    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <32us
                            ClockPM+ Suprise- LLActRep- BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            Capabilities: [100] Advanced Error Reporting <?>
            Capabilities: [13c] Virtual Channel <?>
            Capabilities: [160] Device Serial Number d6-fc-8a-fe-ff-2d-26-00
            Capabilities: [16c] Power Budgeting <?>
            Kernel modules: tg3
    
    05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
            Subsystem: Foxconn International, Inc. Device e01f
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0, Cache Line Size: 64 bytes
            Interrupt: pin A routed to IRQ 17
            Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=64K]
            Capabilities: [40] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                    Address: 00000000  Data: 0000
            Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
                    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                            MaxPayload 128 bytes, MaxReadReq 512 bytes
                    DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
                            ClockPM- Suprise- LLActRep- BwNot-
                    LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
                            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
            Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
                    Vector table: BAR=0 offset=00000000
                    PBA: BAR=0 offset=00000000
            Capabilities: [100] Advanced Error Reporting <?>
            Capabilities: [140] Virtual Channel <?>
            Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
            Kernel driver in use: ath9k
            Kernel modules: ath_pci, ath9k
    
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
    
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
    
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
    
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
    
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0
    
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
            Subsystem: Intel Corporation Device 8086
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
            Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
            Latency: 0

  7. #77
    Very good friend of the forum drgr33n's Avatar
    Join Date
    Jan 2010
    Location
    Dark side of the moon ...
    Posts
    699

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    Use pastebin !!! lol

    Have you tried the fix posted in this post ?

    sudo aticonfig --adapter=all --initial -f
    restart x

  8. #78
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Unhappy Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    Repair work has been fixed, but to no avail

    its now

    root@bt:~# sudo aticonfig --adapter=all --initial -f
    Uninitialised file found, configuring.
    Using /etc/X11/xorg.conf
    Saving back-up to /etc/X11/xorg.conf.fglrx-1
    -------------
    restart x
    -------------
    root@bt:~# pyrit list_cores
    /usr/lib/python2.5/site-packages/cpyrit/cpyrit.py:63: UserWarning: WARNING: Version mismatch between <module 'cpyrit._cpyrit_cpu' from '/usr/lib/python2.5/site-packages/cpyrit/_cpyrit_cpu.so'> ('0.4.0') and <module 'cpyrit._cpyrit_calpp' from '/usr/lib/python2.5/site-packages/cpyrit/_cpyrit_calpp.so'> ('0.4.0-dev (svn r304)')

    "('%s')\n" % (_cpyrit_cpu, _cpyrit_cpu.VERSION, mod, ver))
    Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+

    The following cores seem available...
    #1: 'CAL++ Device #1 'AMD REDWOOD''
    #2: 'CPU-Core (SSE2)'
    #3: 'CPU-Core (SSE2)'
    #4: 'CPU-Core (SSE2)'
    ----------------------------------


    What is the exact problem

  9. #79
    Senior Member
    Join Date
    Jan 2011
    Location
    over the under
    Posts
    197

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    don't use crossfire for wpa cracking it will decrease your performance. You can use amdcccle to initialize the second card graphically or as drgr33n said use aticonfig --adapter=all --initial. I personally don't use the -f switch because it gives unpleasant results on my setup but try what works for you. If you really insist on using crossfire you can also accomplish this with amdcccle.
    Last edited by 2901119; 04-20-2011 at 12:43 AM.

  10. #80
    Just burned his ISO
    Join Date
    Apr 2011
    Posts
    20

    Unhappy Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    ok give me how to use amdcccle to initialize the second card graphically Or a second solution, if allowed

    Output
    root@bt:~# aticonfig --adapter=all --initial
    Found fglrx primary device section
    Using /etc/X11/xorg.conf
    Saving back-up to /etc/X11/xorg.conf.fglrx-2

    Waiting ....

Page 8 of 9 FirstFirst ... 6789 LastLast

Similar Threads

  1. Ati Driver + Stream (Opencl)
    By Freee in forum Tutorial ed HowTo
    Replies: 25
    Last Post: 05-02-2011, 08:42 AM
  2. Pyrit and ATI-Stream
    By HAL9000 in forum Beginners Forum
    Replies: 7
    Last Post: 12-08-2010, 02:27 PM
  3. ATI OpenCL and WPA cracking from the start
    By serokles in forum Beginners Forum
    Replies: 3
    Last Post: 08-28-2010, 12:20 AM
  4. ATI-Stream and pyrit
    By Nazagul in forum Beginners Forum
    Replies: 4
    Last Post: 08-13-2010, 12:44 AM
  5. cpyrit-opencl-0.3.1
    By kataibrengsek in forum Beginners Forum
    Replies: 2
    Last Post: 07-30-2010, 08:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •