Page 1 of 9 123 ... LastLast
Results 1 to 10 of 84

Thread: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

  1. #1
    Member
    Join Date
    Jun 2010
    Posts
    62

    Default Ati Driver | Stream sdk (Opencl) | CAL++ | cpyrit_calpp |

    Waiting Ati-driver fix, I describe the way to install Ati driver, Ati Stream sdk 2.3 support opencl 1.1, CAL++ and module for pyrit on Backtrack 4, R1, R2.
    Requirement
    Ati Driver
    ATI Stream SDK built for 32-bit Linux®
    CAL++
    Download all in home folder and open terminal in that location.
    Commands
    -Install Ati Driver
    Code:
    chmod +x ati-driver-installer-11-?-x86.x86_64.run
    ./ati-driver-installer-11-?-x86.x86_64.run
    Don't change anything and click "continue""agree""continue"
    Verify if the driver is rightly installed
    Code:
    aticonfig --initial=check
    If not found
    Code:
    aticonfig --initial
    Reboot
    Installation complete
    -Installation Ati Stream SDK
    Before continuing check if your video card supports Stream and Opencl
    System Requirements
    Code:
    tar -xvzf ati-stream-sdk-v2.3-lnx32.tgz
    cp -r ati-stream-sdk-v2.3-lnx32 /
    nano ~/.bashrc
    Scroll down to the bottom of file and change
    Code:
    export LD_LIBRARY_PATH=opt/oracle/instantclient_10_2
    in
    Code:
    export LD_LIBRARY_PATH
    and add
    Code:
    ATISTREAMSDKROOT=/ati-stream-sdk-v2.3-lnx32
    ATISTREAMSDKSAMPLESROOT=/ati-stream-sdk-v2.3-lnx32/samples
    LD_LIBRARY_PATH=opt/oracle/instantclient_10_2:$ATISTREAMSDKROOT/lib/x86
    export ATISTREAMSDKROOT
    export ATISTREAMSDKSAMPLESROOT
    Save and close nano.
    Then
    Code:
    cd /
    tar xvfz /ati-stream-sdk-v2.3-lnx32/icd-registration.tgz
    Reboot or logout and login.
    Installation complete

    -CAL++
    Code:
    cd
    apt-get install libboost-dev cmake
    tar xvfz calpp-*.tar.gz
    cd calpp-*
    cmake .
    make
    make install
    Installation complete

    -CAL++ version of Pyrit
    Code:
    apt-get purge pyrit
    svn checkout http://pyrit.googlecode.com/svn/trunk/ pyrit_svn
    cd pyrit_svn/pyrit
    ./setup.py build
    ./setup.py install --record ~/pyrit.txt
    cd ../cpyrit_calpp
    ./setup.py build
    ./setup.py install --record ~/pyritcalpp.txt
    if you have some errors can remove the installed files with
    Code:
    cat ~/pyrit.txt | xargs rm -rf
    cat ~/pyritcalpp.txt | xargs rm -rf
    The procedure is identical to compile Opencl version of pyrit, but CAL++ is faster than Opencl version, especially with the series hd5000.
    Check the video card is used by pyrit
    Code:
    root@bt:~#pyrit list_cores
    Pyrit 0.3.1-dev (svn r277) (C) 2008-2010 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    The following cores seem available...
    #1:  'CAL++ Device #1 'ATI RV770''
    #2:  'CPU-Core (SSE2)'
    A quick test to make sure everything is ok
    Code:
    root@bt:~#pyrit selftest
    Pyrit 0.3.1-dev (svn r277) (C) 2008-2010 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    Cores incorporated in the test:
    #1:  'CAL++ Device #1 'ATI RV770''
    #2:  'CPU-Core (SSE2)'
    #3:  'Network-Clients'
    
    Running selftest...
    
    All results verified. Your installation seems OK.
    Installation complete

    -GPU performance is reduced on system with Hyper Threading

    NVidia/ATI GPU driver requires at least one real core per GPU for efficient work. With HT enabled, the driver needs to fight for CPU cycles with CPU computing core. This leads to GPU starvation and decreased performance. The problem can be solved by reducing number of running CPU-cores: Open '.pyrit/config' and set 'limit_ncpus' to the number of physical CPU-cores.

    -Piryt benchmark(hd4870)
    --CAL++
    Code:
    root@Free:~# pyrit benchmark
    Pyrit 0.4.0-dev (svn r288) (C) 2008-2010 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    Running benchmark (24097.4 PMKs/s)... /
    
    Computed 24097.38 PMKs/s total.
    #1: 'CAL++ Device #1 'ATI RV770'': 24832.1 PMKs/s (RTT 2.8)
    #2: 'CPU-Core (SSE2)': 785.3 PMKs/s (RTT 3.0)
    #3: 'Network-Clients': 0.0 PMKs/s (RTT 0.0)
    --OPENCL
    Code:
    root@Free:~# pyrit benchmark
    Pyrit 0.4.0-dev (svn r288) (C) 2008-2010 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    Running benchmark (19473.1 PMKs/s)... \
    
    Computed 19473.06 PMKs/s total.
    #1: 'OpenCL-Device 'ATI RV770'': 19847.4 PMKs/s (RTT 2.8)
    #2: 'CPU-Core (SSE2)': 790.4 PMKs/s (RTT 3.0)
    #3: 'Network-Clients': 0.0 PMKs/s (RTT 0.0)
    -Oclhashcat

    Code:
    root@bt:/pentest/passwords/oclhashcat# ./oclHashcat32.bin -o ~/found --output-format=2 -n 80 --gpu-loops=1024 -m 1000 ~/samdump ?l?l?l?l ?l?l?l?l
    oclHashcat v0.23 starting...
    
    Digests: 1 entries, 1 unique
    Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
    Platforms: 1
    Platform #1: Advanced Micro Devices, Inc., OpenCL 1.1 ATI-Stream-v2.2 (302) (1 matched)
    Device #1: ATI RV770, 256MB, 0Mhz, 10MCU
    Device #1: Kernel kernels/4098/m1000.32.ATI RV770.kernel (238440 bytes)
    [s]tatus [p]ause [r]esume [h]elp [q]uit => s
    Threads...: 1
    Mode.Left.: Mask '?l?l?l?l' (456976)
    Mode.Right: Mask '?l?l?l?l' (456976)
    Speed.GPU1: 1426.9M/s (running)
    Speed.GPU*: 1426.9M/s
    Recovered.: 0/1 Digests, 0/1 Salts
    Progress..: 5190451200/208827064576 (2.49%)
    Running...: 3 secs
    Estimated.: 2 mins, 22 secs
    HTH
    Last edited by Freee; 03-14-2011 at 03:55 PM.

  2. #2
    Just burned his ISO
    Join Date
    Aug 2010
    Posts
    2

    Default Thank you, worked very well.

    Thank you Freee.
    I've searched for 2 month now how to get this properly working, i only found parts how to get it working but after i read your How-To it worked properly. Again Thank you ... You made my day!

  3. #3
    Just burned his ISO
    Join Date
    Sep 2009
    Posts
    6

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    I have instal bt4 r1 vmware image and I have problem with my graphics card.I tray intall this driver,,but no luck.
    I have FireGL V5200 graphics card.The esolution is fine,but refresh rate is 0.This is the picture of my desktop.
    This is only when hawe install bt in vmware,iso or vmware image.Install on hdd is fine.

    Any sugestion ?Thanks
    Immagini allegate Immagini allegate

  4. #4
    Good friend of the forums Eatme's Avatar
    Join Date
    Aug 2009
    Location
    Socks5
    Posts
    308

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    BT4
    4200 Mobility HD Radeon

    when I do a benchmark, my card only gets 300 pmks/s with both opencl & cal++
    Last edited by Eatme; 09-26-2010 at 11:59 PM.
    Wiffy-Auto-Cracker - was the best thing that ever happen to me. :) Wo0oT :)
    AWUSO36H_500mW_5dBi Antenna

  5. #5
    Just burned his ISO
    Join Date
    Aug 2010
    Posts
    2

    Default Won't work on a VM

    Quote Originally Posted by Smoker View Post
    I have instal bt4 r1 vmware image and I have problem with my graphics card.I tray intall this driver,,but no luck.
    I have FireGL V5200 graphics card.The esolution is fine,but refresh rate is 0.This is the picture of my desktop.
    This is only when hawe install bt in vmware,iso or vmware image.Install on hdd is fine.
    @Smoker: Yeah, this won't work on a virtual machine because VM-Ware will only emulate a graphic card, so you can't install the real ATI Card on the VM. Try to use the BT4R1 Live CD. This should work even if you dont install Backtrack to your system. You have to install this again if you restart your PC so i would recommend installing BT4 for the sake of performance and persistens.

    Good luck,
    Taylantz

  6. #6
    Member
    Join Date
    Jun 2010
    Posts
    62

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    Quote Originally Posted by Eatme View Post
    BT4
    4200 Mobility HD Radeon

    when I do a benchmark, my card only gets 300 pmks/s with both opencl & cal++

    Are you sure your card is used by pyrit?
    post the result
    Code:
     pyrit list_cores

  7. #7
    Good friend of the forums Eatme's Avatar
    Join Date
    Aug 2009
    Location
    Socks5
    Posts
    308

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    Quote Originally Posted by Freee View Post

    Are you sure your card is used by pyrit?
    post the result
    Code:
     pyrit list_cores
    yes I'm totally sure..
    Code:
    ~# pyrit list_cores
    Pyrit 0.3.1-dev (svn r280) (C) 2008-2010 Lukas Lueg http://pyrit.googlecode.com
    This code is distributed under the GNU General Public License v3+
    
    The following cores seem available...
    #1:  'CAL++ Device #1 'ATI RV610''
    #2:  'CPU-Core (SSE2)'
    Last edited by Eatme; 09-27-2010 at 04:00 PM.
    Wiffy-Auto-Cracker - was the best thing that ever happen to me. :) Wo0oT :)
    AWUSO36H_500mW_5dBi Antenna

  8. #8
    Member
    Join Date
    Jun 2010
    Posts
    62

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    @Eatme
    See here AMD graphic card
    You have a tiny and rebranding graphic card.
    If you have no error when using pyrit, 300 pmk/s is your score.

  9. #9
    Good friend of the forums Eatme's Avatar
    Join Date
    Aug 2009
    Location
    Socks5
    Posts
    308

    Default Re: Ati Driver | Stream sdk 2.2 (Opencl 1.1) | CAL++ | cpyrit_calpp |

    wow that sucks...

    But how come at the end, it will give me a total of 4xx PMKs/s
    but my card will be like 300 & cpu will be like 290...but never the less, oh well. Thanks for the guide, this required me to do a HD install and BT4 is faster for me vs VMware.
    Wiffy-Auto-Cracker - was the best thing that ever happen to me. :) Wo0oT :)
    AWUSO36H_500mW_5dBi Antenna

  10. #10
    Just burned his ISO
    Join Date
    Sep 2009
    Posts
    6

    Default Re: Won't work on a VM

    Quote Originally Posted by Taylantz View Post
    @Smoker: Yeah, this won't work on a virtual machine because VM-Ware will only emulate a graphic card, so you can't install the real ATI Card on the VM. Try to use the BT4R1 Live CD. This should work even if you dont install Backtrack to your system. You have to install this again if you restart your PC so i would recommend installing BT4 for the sake of performance and persistens.

    Good luck,
    Taylantz
    Thanks for replay. I finally got the answer that I looking for few days.I updated the video driver on my operating system,windows 7,but dont work.
    Now that I know the answer, I accept that my desktop in the vmware is not be the same as in the insatll iso on hdd.
    I shall consider your opinion and install the bt in hdd.

    sorry for my bad English

Page 1 of 9 123 ... LastLast

Similar Threads

  1. Ati Driver + Stream (Opencl)
    By Freee in forum Tutorial ed HowTo
    Replies: 25
    Last Post: 05-02-2011, 08:42 AM
  2. Pyrit and ATI-Stream
    By HAL9000 in forum Beginners Forum
    Replies: 7
    Last Post: 12-08-2010, 02:27 PM
  3. ATI OpenCL and WPA cracking from the start
    By serokles in forum Beginners Forum
    Replies: 3
    Last Post: 08-28-2010, 12:20 AM
  4. ATI-Stream and pyrit
    By Nazagul in forum Beginners Forum
    Replies: 4
    Last Post: 08-13-2010, 12:44 AM
  5. cpyrit-opencl-0.3.1
    By kataibrengsek in forum Beginners Forum
    Replies: 2
    Last Post: 07-30-2010, 08:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •