Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Broadcom bcm4313 wl not work for mon/inject

  1. #11
    Just burned his ISO
    Join Date
    Jan 2008
    Posts
    6

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    I've contacted one of brcm80211 developers, and here`s the response regarding RFMON implementation :


    RFMON is on the todo list but it's not currently a high priority. We're focused right now on getting the code cleaned up to meet kernel coding guidelines, and on fixing some known stability issues.

    - Henry

    Henry Ptasinski
    henryp@broadcom.com
    So, nothing left to do. seems we should just wait... !

  2. #12
    Just burned his ISO
    Join Date
    Nov 2010
    Posts
    4

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    Thanks strcpy. Is there anyway to get updates about the driver development other than contacting the developers themselves? The brcm80211 part of the git tree seems to be updated daily, but the official page hasn't changed forever and there's no way to tell what's been implemented.

  3. #13
    Just burned his ISO
    Join Date
    Nov 2010
    Posts
    4

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    Had another go at it just now. It seems that the driver is capable of capturing data packets -- if I am simultaneously connected to the AP on wlan0. In this case, everything from ARP capture and injection to cracking my WEP key worked.

    The problem is that it cannot capture any data packets that are not destined for the home MAC address. airmon-ng will only show communication between my laptop and the AP (which include data packets when authenticated on wlan0, and fake authentication requests when disconnected on wlan0). Any traffic between my iPhone and the AP are not detected by airmon-ng.

    I also tried to spoof my iPhone's MAC address with macchanger on both mon0 and wlan0. Attempting fake authentication would get stuck on "Sending Authentication Request", and traffic to and from my iPhone still cannot be detected by airmon-ng.

    Not sure what exactly is missing from the driver for this to happen.

  4. #14
    Just burned his ISO Nokii's Avatar
    Join Date
    Sep 2008
    Posts
    17

    Lightbulb Re: Broadcom bcm4313 wl not work for mon/inject

    Quote Originally Posted by strcpy View Post
    After 5 hours of search>try>config>fail>clean , I feel lost!

    Problem:
    BCM4313 802.11b/g LP-PHY [14e4:4727] chip is picked up by "wl" driver by default. it works well for normal usage, but rfmon/injection is NOT possible with this driver on this chipset.

    Possible solution could be using b43 driver module instead, which I tried almost any trick/method on internet for that. b43 successfully loads, but it`s not picking up the chip and so no interface. no result with iwconfig , and no luck with trying aliases.

    ...

    &-} any comments are welcome... !
    You can also try other Mfgs and Debug / Dump the binary (look for diff in critical area):
    Broadcom Wireless LAN Driver for Microsoft Windows 7
    http://bizsupport1.austin.hp.com/biz...kId=135&mode=3


    Someone tried this to get the "Real Drivers" to install under Ubuntu:

    Linux on the Dell Latitude 2110 n-series
    http://natefoo.wordpress.com/2010/07...2110-n-series/

    I don't know why the didn't try "Wine" to 'install and scoop' ...


    PS: Sure hope there is a solution for:
    HP Pavilion dm1z
    http://www.shopping.hp.com/series/ca...e2/landing_SDP

    With it's portability and AMD Fusion E-350 Processor it's a natch for BT .

  5. #15
    Just burned his ISO
    Join Date
    Feb 2011
    Posts
    1

    Question Re: Broadcom bcm4313 wl not work for mon/inject

    hi all

    tnx strcpy

    i have a broadcom bcm 4313 on my dell n5010 .
    i ve done all u mentioned , but i got a new bug , when i start to scan with airodump-ng there is no ap detect , it's completely empty list and dosent detect my access point , it just scan channels over and over.

    if any idea , i m stuck with broadcom.

    thanks guys.

  6. #16
    Banned
    Join Date
    Dec 2010
    Posts
    1

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    hi, I have brcm80211 driver working for my card. RFMON is working but still working on packet injection. see the link below for installing the driver.
    If you have any luck with packet injection let me know.
    Last edited by sickness; 02-21-2011 at 01:54 PM.

  7. #17
    Just burned his ISO
    Join Date
    Feb 2011
    Posts
    2

    Unhappy Re: Broadcom bcm4313 wl not work for mon/inject

    Hi,

    i hope anyone could help me.
    I Add this code at the end of the makefile:

    KDIR := /lib/modules/$(shell uname -r)/build
    ccflags-y += -I$(SUBDIRS)/include -I$(SUBDIRS)/sys -I$(SUBDIRS)/phy

    default:
    echo $(PWD)
    $(MAKE) -C $(KDIR) SUBDIRS=$(shell pwd) CONFIG_BRCM80211_PCI=y V=1 modu



    If i compile the driver (make) i get a message see below, but the 'brcm80211.ko' file is missing???.

    oot@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211# make
    echo /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211
    /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211
    make -C /lib/modules/2.6.35.8/build SUBDIRS=/root/linux-next-2d57aa7/linux-next-
    2d57aa7/drivers/staging/brcm80211 CONFIG_BRCM80211_PCI=y V=1 modules
    make[1]: Entering directory `/usr/src/linux-source-2.6.35.8'
    test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
    echo; \
    echo " ERROR: Kernel configuration is invalid."; \
    echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
    echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
    echo; \
    /bin/false)
    mkdir -p /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/. tmp_versions ; rm -f /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging /brcm80211/.tmp_versions/*

    WARNING: Symbol version dump /usr/src/linux-source-2.6.35.8/Module.symvers
    is missing; modules will have no dependencies and modversions.

    make -f scripts/Makefile.build obj=/root/linux-next-2d57aa7/linux-next-2d57aa7/d rivers/staging/brcm80211
    (cat /dev/null; ) > /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/ brcm80211/modules.order
    make -f /usr/src/linux-source-2.6.35.8/scripts/Makefile.modpost
    scripts/mod/modpost -i /usr/src/linux-source-2.6.35.8/Module.symvers -I /roo t/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/Module.symvers -o /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/Modul e.symvers -S -w -s
    make[1]: Leaving directory `/usr/src/linux-source-2.6.35.8'


    root@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211# ls -l
    total 44
    drwxrwxr-x 2 root root 4096 2011-02-23 22:08 brcmfmac
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 brcmsmac
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 include
    -rw-rw-r-- 1 root root 1005 2011-02-23 22:08 Kconfig
    -rw-rw-r-- 1 root root 1233 2011-02-26 22:39 Makefile
    -rw-rw-r-- 1 root root 1252 2011-02-26 22:29 Makefile~
    -rw-r--r-- 1 root root 810 2011-02-26 22:15 Makefile.patch
    -rw-r--r-- 1 root root 0 2011-02-26 22:42 modules.order
    -rw-r--r-- 1 root root 0 2011-02-26 22:00 Module.symvers
    -rw-rw-r-- 1 root root 3008 2011-02-23 22:08 README
    -rw-rw-r-- 1 root root 1629 2011-02-23 22:08 TODO
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 util
    root@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211#


    thanks
    boerly

  8. #18
    Just burned his ISO
    Join Date
    Feb 2011
    Posts
    2

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    Hello,

    have anyone installed the current saging driver for brcm80211.
    I could't compile the brcm80211.ko as it was describe in this thread.


    -boerly

  9. #19
    Just burned his ISO
    Join Date
    Jan 2011
    Posts
    2

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    Quote Originally Posted by boerly View Post
    Hi,

    i hope anyone could help me.
    I Add this code at the end of the makefile:

    KDIR := /lib/modules/$(shell uname -r)/build
    ccflags-y += -I$(SUBDIRS)/include -I$(SUBDIRS)/sys -I$(SUBDIRS)/phy

    default:
    echo $(PWD)
    $(MAKE) -C $(KDIR) SUBDIRS=$(shell pwd) CONFIG_BRCM80211_PCI=y V=1 modu



    If i compile the driver (make) i get a message see below, but the 'brcm80211.ko' file is missing???.

    oot@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211# make
    echo /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211
    /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211
    make -C /lib/modules/2.6.35.8/build SUBDIRS=/root/linux-next-2d57aa7/linux-next-
    2d57aa7/drivers/staging/brcm80211 CONFIG_BRCM80211_PCI=y V=1 modules
    make[1]: Entering directory `/usr/src/linux-source-2.6.35.8'
    test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
    echo; \
    echo " ERROR: Kernel configuration is invalid."; \
    echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
    echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
    echo; \
    /bin/false)
    mkdir -p /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/. tmp_versions ; rm -f /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging /brcm80211/.tmp_versions/*

    WARNING: Symbol version dump /usr/src/linux-source-2.6.35.8/Module.symvers
    is missing; modules will have no dependencies and modversions.

    make -f scripts/Makefile.build obj=/root/linux-next-2d57aa7/linux-next-2d57aa7/d rivers/staging/brcm80211
    (cat /dev/null; ) > /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/ brcm80211/modules.order
    make -f /usr/src/linux-source-2.6.35.8/scripts/Makefile.modpost
    scripts/mod/modpost -i /usr/src/linux-source-2.6.35.8/Module.symvers -I /roo t/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/Module.symvers -o /root/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211/Modul e.symvers -S -w -s
    make[1]: Leaving directory `/usr/src/linux-source-2.6.35.8'


    root@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211# ls -l
    total 44
    drwxrwxr-x 2 root root 4096 2011-02-23 22:08 brcmfmac
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 brcmsmac
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 include
    -rw-rw-r-- 1 root root 1005 2011-02-23 22:08 Kconfig
    -rw-rw-r-- 1 root root 1233 2011-02-26 22:39 Makefile
    -rw-rw-r-- 1 root root 1252 2011-02-26 22:29 Makefile~
    -rw-r--r-- 1 root root 810 2011-02-26 22:15 Makefile.patch
    -rw-r--r-- 1 root root 0 2011-02-26 22:42 modules.order
    -rw-r--r-- 1 root root 0 2011-02-26 22:00 Module.symvers
    -rw-rw-r-- 1 root root 3008 2011-02-23 22:08 README
    -rw-rw-r-- 1 root root 1629 2011-02-23 22:08 TODO
    drwxrwxr-x 3 root root 4096 2011-02-23 22:08 util
    root@bt:~/linux-next-2d57aa7/linux-next-2d57aa7/drivers/staging/brcm80211#


    thanks
    boerly
    ı have same error. How to fix error ?

  10. #20
    Just burned his ISO
    Join Date
    Mar 2011
    Posts
    1

    Default Re: Broadcom bcm4313 wl not work for mon/inject

    Viewing the experience of lupius and strcpy, I think there's light at the end of the tunnel.
    From past few days, i am also searching for the drivers which support packet injection on my dell N5010 Laptop which has a BCM4313 chipset.


    For the same, can anyone help me out on how to get packet injection and monitor work (if its possible, because apart from this post, i have never seen a +ve feedback)

    Also i dont know how to get a snapshot of Git repositories.

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Intel Pro 3945abg doesn't work work after apt-get dist-upgrade
    By PalmerEldritch in forum BackTrack Bugs
    Replies: 2
    Last Post: 07-22-2010, 02:02 PM
  2. Replies: 1
    Last Post: 05-04-2009, 04:45 PM
  3. Broadcom 4310 rev 01 -- does it work?
    By XLinux10 in forum OLD Newbie Area
    Replies: 16
    Last Post: 01-22-2009, 06:36 AM
  4. Broadcom 4311 Does Work :D
    By TheVault in forum OLD Newbie Area
    Replies: 33
    Last Post: 03-30-2008, 05:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •