Hye there!

I using HP MINI 210.
And i couldn't connect to wireless even there are listing in the wicd. And i do a lot of tutorial out there.. but still cant solve it.

and one of my friend told that there got bug on my driver/module.
Hope someone can help me with my prob.

Thank you.. may god bless you.

Code:
Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
Here some from #dmesg

Code:
rt3090sta: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
rt2860 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
rt2860 0000:02:00.0: setting latency timer to 64


=== pAd = f84d2000, size = 515072 ===

<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xf84c0000, csr_addr=0xf84c0000!
ra0 (rt2860): not using net_device_ops yet
RX DESC f68fe000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
NVM is Efuse and its size =2d[2d0-2fc]
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
AUX_CTRL = 0x 4c02
Read AUX_CTRL = 0x4c02
Write AUX_CTRL = 0x5c02
OSC_CTRL = 0x3ff11
====> rt30xx Read PowerLevelMode = 0x3.
====> rt30xx F Write 0x83 Command = 0x3.
ra0: no IPv6 routers present
mtrr: base(0x40000000) is not aligned on a size(0x7f0000) boundary
rt28xx_close call RT28xxPciAsicRadioOff fail !!
RX DESC f6597000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
CfgSetCountryRegion():CountryRegion in eeprom was programmed
CfgSetCountryRegion():CountryRegion in eeprom was programmed
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
NVM is Efuse and its size =2d[2d0-2fc]
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
AUX_CTRL = 0x 5d42
Read AUX_CTRL = 0x5d42
Write AUX_CTRL = 0x5d42
OSC_CTRL = 0x3ff11
====> rt30xx Read PowerLevelMode = 0x3.
====> rt30xx F Write 0x83 Command = 0x3.
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
ra0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 15000 nsec
rt28xx_close call RT28xxPciAsicRadioOff fail !!
RX DESC f638d000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
CfgSetCountryRegion():CountryRegion in eeprom was programmed
CfgSetCountryRegion():CountryRegion in eeprom was programmed
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
NVM is Efuse and its size =2d[2d0-2fc]
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
AUX_CTRL = 0x 5d42
Read AUX_CTRL = 0x5d42
Write AUX_CTRL = 0x5d42
OSC_CTRL = 0x3ff11
====> rt30xx Read PowerLevelMode = 0x3.
====> rt30xx F Write 0x83 Command = 0x3.
rt28xx_close call RT28xxPciAsicRadioOff fail !!
RX DESC f67ff000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
CfgSetCountryRegion():CountryRegion in eeprom was programmed
CfgSetCountryRegion():CountryRegion in eeprom was programmed
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
NVM is Efuse and its size =2d[2d0-2fc]
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
<==== rt28xx_init, Status=0
0x1300 = 00064300
AUX_CTRL = 0x 5d42
Read AUX_CTRL = 0x5d42
Write AUX_CTRL = 0x5d42
OSC_CTRL = 0x3ff11
====> rt30xx Read PowerLevelMode = 0x3.
====> rt30xx F Write 0x83 Command = 0x3.
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
ra0: no IPv6 routers present
rt28xx_close call RT28xxPciAsicRadioOff fail !!