Results 1 to 7 of 7

Thread: Injection Trouble with IPW2200 Wireless Adapter

  1. #1
    Just burned his ISO
    Join Date
    May 2010
    Posts
    7

    Default Injection Trouble with IPW2200 Wireless Adapter

    Hi all,

    I am running Back Track 4 off a live cd, using a HP Pavilion DV1100 that has a built-in Intel Pro Wireless IPW2200 BG card.

    I am able to put it in monitor mode and capture packets no problem with airodump-ng. My trouble is injecting ANY type of packet using aireplay-ng. No matter the method, including the --test option, it always returns at 0% for injection attempts.

    I've tried first by simply enabling monitor mode:
    airmon-ng start eth1, starting airodump, and then starting aireplay in separate shell.

    I've also tried creating the rtap0 interface described in several posts and on aircrack website and calling rtap0 as listener and eth1 as injector:
    Code:
    rmmod ipw2200
    modprobe ipw2200 rtap_iface=1
    ifconfig eth1 up
    ifconfig rtap0 up
    iwconfig eth1 essid <ESSID> channel <#> key s:fakekey mode managed
    airodump-ng -c <channel> --bssid <AP MAC> -w dump rtap0
    aireplay-ng -4 -a <AP MAC> -h 00:11:22:33:44:55 -i rtap0 eth1
    Still can capture packets on airodump. But immediately once I start aireplay on a seperate shell, the airodump-ng stops collecting and the #/s stays at zero.

    Some of my attempts were following these links:
    Aircrack-NG IPW2200/doku.php?id=ipw2200
    IPW2200 Generic Aircrack
    Basic Injection with IPW2200 for Beginners

    I'm assuming from the boards that all IPW2200 patches required are already installed and ready to go. Should I be expecting such trouble with the IPW2200? Any tips from those who used with BT 4? If it's purely the card, perhaps I'll just get another plug-in card?

    Thank you.

  2. #2
    Junior Member WolverineOD's Avatar
    Join Date
    Apr 2010
    Location
    Infront of Screen
    Posts
    28

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    Have you tried putting the card into monitor mode with airmon-ng rather than using modprobe?

    The context for this is airmon-ng start [Interface name]
    Any sufficiently advanced technology is indistinguishable from magic - Arthur C. Clarke

  3. #3
    Just burned his ISO
    Join Date
    May 2010
    Posts
    7

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    I tried different variants including the airmon-ng. I decided to just spend the $30 on a AWUS036H since it seems to be well supported. No reason for me to struggle with if the cost is so cheap to avoid hardware compatibility issues

  4. #4
    Just burned his ISO
    Join Date
    Sep 2010
    Posts
    2

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    I have the same problem!

    Monitor Mode work!
    Injection dont!

    How can i solve the problem?
    I started the aireplay -9 Injection test, and this is the output:

    No answer!
    1 AP found!
    WLAN
    0/30

    Pls help me!
    I need the Injection!

    I´ve tried it so many times. =(

  5. #5
    Good friend of the forums gunrunr's Avatar
    Join Date
    Jan 2010
    Location
    shining my spoon
    Posts
    265

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    the ipw2200 can inject, but only injects arps, so make sure you only use the arp replay attack. and to make sure you have an arp packet to replay, connect to the target ap with another client.
    i believe the correct attack number is -3 make sure you don't have mac address filtering turned on
    Wielder of the spoon of doom
    Summercon, Toorcon, Defcon, Bsides, Derbycon, Shmoocon oh my
    Come hang out with hackers on twitter @gunrunr556

  6. #6
    Just burned his ISO
    Join Date
    Sep 2010
    Posts
    2

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    Oh, thats not good or? Its totally limited?

    Do you can recommend me the Alfa AWUS036NH?
    Is this Card FULLY supporting Monitor Mode and Injection?
    Also the range is important.

    Also i need a Shop where i can buy this Card.
    I´m from Germany.

  7. #7
    Just burned his ISO
    Join Date
    Aug 2010
    Posts
    12

    Default Re: Injection Trouble with IPW2200 Wireless Adapter

    yous can inject but only ARP
    see ya

Similar Threads

  1. Replies: 5
    Last Post: 01-07-2011, 05:15 PM
  2. Replies: 2
    Last Post: 08-29-2009, 01:48 PM
  3. Replies: 7
    Last Post: 02-10-2009, 11:02 PM
  4. Wireless adapter with good signal and injection
    By ghell in forum OLD Newbie Area
    Replies: 15
    Last Post: 09-19-2008, 04:58 AM
  5. Best USB Wireless Adapter with injection and external Antenna.
    By caram.junior in forum OLD Newbie Area
    Replies: 10
    Last Post: 09-02-2008, 11:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •