ASUS X70AB startx needs fix-vesa + no w-lan

[mcstie]

ASUS X70AB

AMD Turion RM74
ATI Radeon HD 4570
ATHEROS AR9285 Wireless Network Adapter
ATHEROS AR8121/AR8113/AR8114 PCI-E Ethernet Controller

So with fix-vesa (else "no screens" error will appear) backtrack runs normal exept wlan not found (device named lo and only contains localhost).


But whats Backtrack without internet

[hhmatt]

But whats Backtrack without internet

Did you even try turning on your network?

/etc/init.d/networking start

[mcstie]

no but even if i do it still doesnt work

the madwifi driver aitn able to instlal on bt4? gives me error every time... (like smth not found even if i make an build everything up...)

compat-driver (ath5k /9k) gives me back less errors, but now theres even less reaktion of the Atheros card... imma go on tommorw if anybody has an idea why these both driver packages always tell me they cant find some files (what is unexplainable to me because they are original downoad from the original sites).. pls tell me :P

[hhmatt]

no but even if i do it still doesnt work

the madwifi driver aitn able to instlal on bt4? gives me error every time... (like smth not found even if i make an build everything up...)

compat-driver (ath5k /9k) gives me back less errors, but now theres even less reaktion of the Atheros card... imma go on tommorw if anybody has an idea why these both driver packages always tell me they cant find some files (what is unexplainable to me because they are original downoad from the original sites).. pls tell me :P

This is hard to read so I'll try my best. It sounds like you've screwed up your drivers because madwifi is installed by default. While I do not have your particular card I do have 2 atheros cards and know that the device is now wlan instead of ath. Reinstall or boot from disk and start your networking and wicd and see how well that works.
If you're missing files post what output you're getting. Otherwise noone can help get your card installed properly.

[mcstie]

oke i reinstlaled bt, did your "/etc/init.d/networking start" command. A wlan device is detected (wlan0). It has the same Mac Adresse as if i use wlan with Windows. But still if i try to connect to internet it cant resolve host.So i did command "ifconfig wlan0 up" but it still not works. In my network interface window in the controll Center there is only one device caled low but i have no idea how to get wlan0 into that list.if i do "iwlist wlan0 scan" i get servereal networks including the one i want to connect to.Im sry if it sounds nooby but how do i connect to than network :S


and thx to hhmatt yout posts helped me lot, hope you can read this one easyer xD

[hhmatt]

You can start the wicd wireless network manager.

/etc/init.d/wicd start

Then use the GUI to connect to whichever network you chose.

Or you can check out this helpful thread by pureh@te.