Results 1 to 2 of 2

Thread: Save2Cd Help

  1. #1
    Just burned his ISO
    Join Date
    Feb 2007
    Posts
    1

    Default Save2Cd Help

    I run Save2cd and i get this.

    bt bin # save2cd
    saving changes to /tmp/slaxcd/modules/slaxconf-"2007.03.07-03.17.40".mo...
    cdrecord: Warning: Running on Linux-2.6.20-BT-PwnSauce-NOSMP
    cdrecord: There are unsettled issues with Linux-2.5 and newer.
    cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
    cdrecord: Drive needs to reload the media to return to proper status.
    cdrecord: Success. read track info: scsi sendcmd: no error
    CDB: 52 01 00 00 00 FF 00 00 1C 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
    Sense flags: Blk 0 (not valid)
    resid: 28
    cmd finished after 0.000s timeout 240s
    cdrecord: Cannot get next writable address for 'invisible' track.
    cdrecord: This means that we are checking recorded media.
    cdrecord: This media cannot be written in streaming mode anymore.
    cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
    cdrecord: Cannot read first writable address
    mkisofs: Warning: -C specified without -M: old session data will not be merged.
    mkisofs: Malformed cdrecord parameters
    Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
    cdrecord: Warning: Running on Linux-2.6.20-BT-PwnSauce-NOSMP
    cdrecord: There are unsettled issues with Linux-2.5 and newer.
    cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
    TOC Type: 3 = CD-ROM XA mode 2
    scsidev: '/dev/hdc'
    devname: '/dev/hdc'
    scsibus: -2 target: -2 lun: -2
    Warning: Open by 'devname' is unintentional and not supported.
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.8'.
    SCSI buffer size: 64512
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 2
    Capabilities :
    Vendor_info : 'LITE-ON '
    Identifikation : 'DVD+RW SOHW-802S'
    Revision : 'UPP6'
    Device seems to be: Generic mmc2 DVD-ROM.
    Current: 0x000A
    Profile: 0x001B
    Profile: 0x001A
    Profile: 0x0010
    Profile: 0x000A (current)
    Profile: 0x0009
    Profile: 0x0008
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1895168 = 1850 KB
    FIFO size : 4194304 = 4096 KB
    cdrecord: No such file or directory. Cannot open '/tmp/cdr.iso'.

    tried to see what was wrong so i opened kwrite and saved a file named cdr.iso to the tmp dir and it seemed like it was working right. rebooted it save nothing i did. help please..

    the final kicks ass... alot more stuff thanks.

  2. #2
    Just burned his ISO
    Join Date
    Mar 2007
    Posts
    1

    Default save2cd problem

    I have this same exact problem as Twisted with save2cd on the BT2 final.

    It worked perfectly with the beta. I'm on the same laptop, with the same CD burner.

    Any help would be greatly appreciated.

    Even with this small glitch, the BT2 final is outstanding

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •