Results 1 to 4 of 4

Thread: Netgear WG111v3 USB Dongle

  1. #1
    Just burned his ISO
    Join Date
    Jun 2010
    Posts
    1

    Default Netgear WG111v3 USB Dongle

    Ok ladies and gentlemen, I need some help! As stated in the title, I have a Netgear wg111v3 usb dongle (chipset rtl8187). From my research on the forums and google, I have determined that this NIC is indeed compatiblpe with BT4 Final. Additionally, from what I have read it, too, supports injection out-of-the-box (or so I read). So here comes the issue. Yes, the NIC does work out of the box and yes injection SEEMS to work. When I perform an Aireplay-ng -Test, it returns stating that injection is indeed working. However, when I actually run through an audit on my test router (which is netgear as well), it fails to inject any packets.
    AP is using 128-bit Wep and is approx 10 feet from the computer.
    regardless of the type of attack I using in aireplay, I cannot successfully inject a single packet.

    Any help would be more than appreciated.

    Side note on my origianal post. To be more specific, the chipset is the rtl8187b (from what my research has shown). I'm sure this makes a difference in driver patching, if necessary.
    Last edited by balding_parrot; 06-29-2010 at 12:37 AM.

  2. #2
    Junior Member dromar421's Avatar
    Join Date
    Jun 2010
    Location
    Some were out there or here
    Posts
    35

    Default Re: Netgear WG111v3 USB Dongle

    Ya wg111v3 does all the good stuff, but I have also used this dongle I had the same problem at first. I had to really hammer the ap to get it to inject, like when using aireplay would Have to slam it with -1 15, to 20 to get it to work, some times it took me 3 or four tries but after that it ran fine. Might try uping your packets hope this helps cause after I done it twice I have had no problems out of it.
    Last edited by dromar421; 07-16-2010 at 06:46 AM.

  3. #3
    Just burned his ISO
    Join Date
    Aug 2010
    Posts
    1

    Thumbs up Re: Netgear WG111v3 USB Dongle

    Thank you VERY much !!! after about 20 hours of trying different things i finally get this xor file Thank you a lot !!!!!!

  4. #4
    Just burned his ISO
    Join Date
    Mar 2010
    Posts
    10

    Default Re: Netgear WG111v3 USB Dongle

    Quote Originally Posted by dromar421 View Post
    Ya wg111v3 does all the good stuff, but I have also used this dongle I had the same problem at first. I had to really hammer the ap to get it to inject, like when using aireplay would Have to slam it with -1 15, to 20 to get it to work, some times it took me 3 or four tries but after that it ran fine. Might try uping your packets hope this helps cause after I done it twice I have had no problems out of it.
    I have this card too but dont know what you mean by slam it with -1 15? Thanks in advance.

Similar Threads

  1. Replies: 7
    Last Post: 07-28-2009, 08:28 AM
  2. NetGear WG111V3 modding
    By Gr3G-0 in forum OLD Newbie Area
    Replies: 0
    Last Post: 04-19-2009, 05:16 PM
  3. WG111v3 - How to install the driver?
    By psygate in forum OLD Newbie Area
    Replies: 5
    Last Post: 04-10-2009, 05:13 PM
  4. usb dongle help?
    By *l*i*n*u*x* in forum OLD Newbie Area
    Replies: 3
    Last Post: 06-10-2008, 03:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •