to madwifi driver 4 wpa_Supplicant, it's simple...
download from some slackware packet site (i can't post a url yet) and install it....
then uninstall wpa_supplicant whit then google 4 wpa supplicant, download the source from the wpa_supplicant homepage, and extract in a directory....
ok now:
Code:
cd /place/to/wpa_supplicant
cp defconfig .config
then you have a .config file that we have to modify my .config file is:
Code:
# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y
# Driver interface for Agere driver
#CONFIG_DRIVER_HERMES=y
# Change include directories to match with the local setup
#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
#CFLAGS += -I../../include/wireless
#Driver interface for madwifi driver
CONFIG_DRIVER_MADWIFI=y
#Change include directories to match with the local setup
CFLAGS += -I/usr/include/madwifi
# Driver interface for Prism54 driver
# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
# for developers only)
#CONFIG_DRIVER_PRISM54=y
# Driver interface for ndiswrapper
#CONFIG_DRIVER_NDISWRAPPER=y
# Driver interface for Atmel driver
CONFIG_DRIVER_ATMEL=y
# Driver interface for Broadcom driver
#CONFIG_DRIVER_BROADCOM=y
# Example path for wlioctl.h; change to match your configuration
#CFLAGS += -I/opt/WRT54GS/release/src/include
# Driver interface for Intel ipw2100/2200 driver
#CONFIG_DRIVER_IPW=y
# Driver interface for generic Linux wireless extensions
CONFIG_DRIVER_WEXT=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# By default, driver_ndis uses WinPcap for low-level operations. This can be
# replaced with the following option which replaces WinPcap calls with NDISUIO.
# However, this requires that WZC is disabled (net stop wzcsvc) before starting
# wpa_supplicant.
# CONFIG_USE_NDISUIO=y
# Driver interface for development testing
#CONFIG_DRIVER_TEST=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
# included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-FAST
# Note: Default OpenSSL package does not include support for all the
# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
# to add the needed functions.
#CONFIG_EAP_FAST=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# EAP-SAKE
#CONFIG_EAP_SAKE=y
# EAP-GPSK
#CONFIG_EAP_GPSK=y
# Include support for optional SHA256 cipher suite in EAP-GPSK
#CONFIG_EAP_GPSK_SHA256=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Development testing
#CONFIG_EAPOL_TEST=y
what you had to modify is CFLAGS += -I/usr/include/madwifi
that indicate the directory in wich you have madwifi driver installed (you can simply search it with console typing "locate madwifi")
ok then after the change, save .config
and
type
Code:
.config
make
make all
finally reboot (isn't necessary but do it)
and then you will able to use
wpa_supplicant -Dmadwifi -iath0 -c/etc/wpa_supplicant.conf
p.s. modify also wpa_supplicant.conf with your network parameters.
Originally Posted by Desidero
?
?
