Results 1 to 3 of 3

Thread: Problem connecting to Wep network

  1. #1
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    4

    Default Problem connecting to Wep network

    Hi guys this is my first post here

    i know maybe its not the best place to post a wicd problem but their forum website doesnt allow anymore registration so...

    first i must tell you that im absolutely sure about my password and i took a look at the wiress-settings.conf and all the others .conf and it seems ok so i really dont know where to look.

    heres the wicd log hoping you guys can help me

    Connecting to wireless network BELL111
    2010/01/20 22:09:54 :: Putting interface down
    2010/01/20 22:09:54 :: Releasing DHCP leases...
    2010/01/20 22:09:54 :: Setting false IP...
    2010/01/20 22:09:55 :: Stopping wpa_supplicant and any DHCP clients
    2010/01/20 22:09:55 :: Flushing the routing table...
    2010/01/20 22:09:55 :: Putting interface up...
    2010/01/20 22:09:55 :: Network dict is missing necessary keys. Cannot authenticate. {'afterscript': None, 'bssid': '00:26:50:35:7C:F9', 'ip': None, 'passphrase': '24966345300935668080338748', 'quality': 38, 'gateway': None, 'use_global_dns': False, 'strength': '-86', 'disconnect': None, 'encryption': True, 'beforescript': None, 'hidden': False, 'channel': '5', 'mode': 'Master', 'psk': '2e2b838bb7080cc8f8a471f9bbcd6c6a0e9ecedddfac059b5 4ede0518dfbf760', 'has_profile': True, 'netmask': None, 'key': '24966345300935668080338748', 'enctype': 'wep-passphrase', 'dns3': None, 'dns2': None, 'dns1': None, 'use_settings_globally': False, 'use_static_dns': False, 'encryption_method': 'WEP', 'essid': 'BELL111', 'automatic': True}
    2010/01/20 22:09:55 :: Running DHCP
    2010/01/20 22:09:55 :: Internet Systems Consortium DHCP Client V3.1.1
    2010/01/20 22:09:55 :: Copyright 2004-2008 Internet Systems Consortium.
    2010/01/20 22:09:55 :: All rights reserved.
    2010/01/20 22:09:55 ::
    2010/01/20 22:09:55 :: wmaster0: unknown hardware address type 801
    2010/01/20 22:09:56 :: wmaster0: unknown hardware address type 801
    2010/01/20 22:09:56 :: Listening on LPF/wlan0/00:21:5c:12:73:27
    2010/01/20 22:09:56 :: Sending on LPF/wlan0/00:21:5c:12:73:27
    2010/01/20 22:09:56 :: Sending on Socket/fallback
    2010/01/20 22:09:58 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
    2010/01/20 22:10:05 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
    2010/01/20 22:10:14 :: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 11

    and it hangs here without doing anything

    if you guys need any other info let me know

    Thanks a lot in advance

  2. #2
    Super Moderator Archangel-Amael's Avatar
    Join Date
    Jan 2010
    Location
    Somewhere
    Posts
    8,012

    Default

    There is no support for bt4 final here.
    BackTrack Linux
    To be successful here you should read all of the following.
    ForumRules
    ForumFAQ
    If you are new to Back|Track
    Back|Track Wiki
    Failure to do so will probably get your threads deleted or worse.

  3. #3
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    4

    Default

    Ok thanks i will go check it out

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •