Results 1 to 9 of 9

Thread: Injection problem ipw3945 rtl8187 ar9285

  1. #1
    Just burned his ISO
    Join Date
    Nov 2009
    Posts
    2

    Default Injection problem ipw3945 rtl8187 ar9285

    Hello all,
    I have tried those three cards (ipw3945 rtl8187 ar9285) installed on diferent laptops ,and i had he same problem injecting.I tryed BT4pre ,and BT4 beta,with exact same resolts.

    i get this img248.imageshack.us/img248/5274/snapshot4.jpg

    all seems to work properly but i get no ARP and ACKs,and no data.
    the commands i used are:
    #airmon-ng
    #airodump-ng wlan0
    #airodump-ng -w wep -c channel --bssid bssid wlan0
    #aireplay-ng -1 0 -a bbsid wlan0
    #aireplay-ng -3 -b bssid wlan0

    i tryed #airmon-ng start wlan0
    and then use mon0 instead of wlan0 ,but got the same exact resolts.generally i never got a error message,but never got any AVR and ACKs,Data never start going fast,thow as you can see in image i have 4800+ packets read.What am i doing wrong?Any help would be appreciated,thx in advaced.

  2. #2
    Junior Member
    Join Date
    Aug 2008
    Posts
    29

    Default

    is ure <device> in monitor mode?

    try reading

    airmon-ng [Aircrack-ng]

  3. #3
    Just burned his ISO
    Join Date
    Nov 2009
    Posts
    2

    Default

    I try mon0 and got the same resolts
    do i have to stop wlan0,or something?

  4. #4
    Junior Member Isohump's Avatar
    Join Date
    Sep 2009
    Posts
    63

    Default

    You have to use a mon0 for injecting and mon1 for capturing and on top of all that wlan0 must be down weird huh. Well if anyone has the same problem as me try it out and see if that works for you. ^_^


    !!!!!!HERE!!!!!![/URL]
    One day your life will flash before your eyes. Make sure its worth watching.

  5. #5
    Just burned his ISO
    Join Date
    Jul 2009
    Posts
    8

    Default

    I think you don't have probelm (I'm not sure)

    but maybe the network with no client

    ===
    I use this steps and work fine

    #airmon-ng
    wlan0
    wlan1 ( alfa card )

    # airmon-ng stop wlan1

    #ifconfig wlan1 down

    #macchanger --mac 00:11:22:33:44:55 wlan1

    #airmon-ng start wlan1

    now change to mon0

    #airodump-ng mon0

    #airodump-ng -w wep -c channel --bssid bssid mon0
    and

    #aireplay-ng -1 0 -a bbsid -h 00:11:22:33:44:55 mon0

    finely use

    #aireplay-ng -0 0 -a bbsid -h 00:11:22:33:44:55 mon0

    use this maybe help you

    sorry about my bad Language

    Good luck

  6. #6
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    1

    Default

    Hello All

    I am not a expert but peoples here i Use the RTL8187 with BT4 pre final without any problem
    yes some time it dont do injection in that case i try to use NO CLIENT ATTACK and i get sucess

    Try googleing about NO CLIENT ATTACK and you will find couple of new commands to attack a Wireless who is a sleep and no AP is connected

    Thanx all

    TechBug

  7. #7
    Just burned his ISO
    Join Date
    Nov 2009
    Posts
    1

    Default

    Quote Originally Posted by Isohump View Post
    You have to use a mon0 for injecting and mon1 for capturing and on top of all that wlan0 must be down weird huh. Well if anyone has the same problem as me try it out and see if that works for you. ^_^


    !!!!!!HERE!!!!!![/URL]
    Can you write down here in detail how to use mon0 for injecting and mon1 for capturing. Thanks in advance.

    Quote Originally Posted by TechBug View Post
    Hello All

    I am not a expert but peoples here i Use the RTL8187 with BT4 pre final without any problem
    yes some time it dont do injection in that case i try to use NO CLIENT ATTACK and i get sucess

    Try googleing about NO CLIENT ATTACK and you will find couple of new commands to attack a Wireless who is a sleep and no AP is connected

    Thanx all

    TechBug

    I also applied frag attack and chopchop attack on some AP but I didn't get those fragments to use. Did you patch your rtl8187L in BT4 pre final?

  8. #8
    Just burned his ISO
    Join Date
    Jan 2010
    Posts
    3

    Default

    if you find a fix for this problem please post it here, ive tried updating ath9k aswell with no results. im using the ar9285 and its constantly showing corrupt packets, which make it hard to view the client list or even capture properly. any help is welcome.
    P.S. i've tried the other posts in this thread with no success.

  9. #9
    Just burned his ISO
    Join Date
    May 2008
    Posts
    2

    Default

    I had the same problem with my 3945abg card, and the solution was to install the compat-wireless drivers. I'm on ubuntu, but the installation on BT4 should be about the same as described here: linuxwireless.org/en/users/Download#Compat-wireless_release_types

    Worth a try

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •